Date: Wed, 26 Oct 2011 09:48:00 -0700 From: YongHyeon PYUN <pyunyh@gmail.com> To: Andrey Smagin <samspeed@mail.ru> Cc: freebsd-net@freebsd.org Subject: Re: PCI-E VT6130 NIC (if_vge) hang system with gigabit link Message-ID: <20111026164800.GA13234@michelle.cdnetworks.com> In-Reply-To: <E1RJ06k-0003eP-00.samspeed-mail-ru@f223.mail.ru> References: <E1RIaki-0002pq-00.samspeed-mail-ru@f197.mail.ru> <20111025200937.GA9348@michelle.cdnetworks.com> <E1RJ06k-0003eP-00.samspeed-mail-ru@f223.mail.ru>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, Oct 26, 2011 at 01:49:14PM +0400, Andrey Smagin wrote: > Hi ! > vge0@pci0:2:0:0: class=0x020000 card=0x01101106 chip=0x31191106 rev=0x82 hdr=0x00 > vendor = 'VIA Technologies, Inc.' > device = 'VT6120/VT6121/VT6122 Gigabit Ethernet Adapter' > class = network > subclass = ethernet > bar [10] = type I/O Port, range 32, base 0x8000, size 256, enabled > bar [14] = type Memory, range 64, base 0xd4100000, size 256, enabled > cap 01[50] = powerspec 3 supports D0 D1 D2 D3 current D0 > cap 10[90] = PCI-Express 1 endpoint max data 128(128) link x1(x1) > cap 05[c0] = MSI supports 1 message, 64 bit, vector masks enabled with 1 message > ecap 0001[100] = AER 1 0 fatal 1 non-fatal 6 corrected > ecap 0003[130] = Serial 1 0000110600000000 > vge1@pci0:1:0:0: class=0x020000 card=0x01101106 chip=0x31191106 rev=0x82 hdr=0x00 > vendor = 'VIA Technologies, Inc.' > device = 'VT6120/VT6121/VT6122 Gigabit Ethernet Adapter' > class = network > subclass = ethernet > bar [10] = type I/O Port, range 32, base 0x7000, size 256, enabled > bar [14] = type Memory, range 64, base 0xd4000000, size 256, enabled > cap 01[50] = powerspec 3 supports D0 D1 D2 D3 current D0 > cap 10[90] = PCI-Express 1 endpoint max data 128(128) link x1(x1) > cap 05[c0] = MSI supports 1 message, 64 bit, vector masks enabled with 1 message > ecap 0001[100] = AER 1 1 fatal 1 non-fatal 6 corrected > ecap 0003[130] = Serial 1 0000110600000000 > > dmesg is empty Hmm, check whether you have old dmesg file in /var/log directory. At least, I need output of 'devinfo -rv' to know which PHY you have. By chance, are you using manual link configuration instead of relying on auto-negotiation? > > 26 октября 2011, 00:11 от YongHyeon PYUN <pyunyh@gmail.com>: > > On Tue, Oct 25, 2011 at 10:44:48AM +0400, Andrey Smagin wrote: > > > Hi ALL ! If I connect gigabit switch to my card - system hang until I unplug patchcord from device. > > > With 100Mbit switch card work good. > > > > Show me the output of dmesg and 'pciconf -lcbv'. > > > > > System: Current - r226163 > > > > > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20111026164800.GA13234>