Date: Mon, 03 Jan 2011 16:31:50 -0500 From: Mike Tancsa <mike@sentex.net> To: Troy Beisigl <troy@i2bnetworks.com> Cc: freebsd-questions@freebsd.org Subject: Re: 9650SE-2LP raid card locks system Message-ID: <4D224046.4050307@sentex.net> In-Reply-To: <F65093FD-6F09-4493-AB0C-673671C93C5C@i2bnetworks.com> References: <F65093FD-6F09-4493-AB0C-673671C93C5C@i2bnetworks.com>
next in thread | previous in thread | raw e-mail | index | archive | help
I have a number of these cards and they work very well for us. What version of the firmware are you using on the card ? I have this on a busy db server. But its RELENG8. twa0: <3ware 9000 series Storage Controller> port 0x1000-0x10ff mem 0xb0000000-0xb1ffffff,0xb4000000-0xb4000fff irq 19 at device 0.0 on pci12 twa0: [ITHREAD] twa0: INFO: (0x15: 0x1300): Controller details:: Model 9650SE-2LP, 2 ports, Firmware FE9X 3.08.00.016, BIOS BE9X 3.08.00.004 I have had good luck with Areca cards as well, but they start in 4 port models. But really, all should work just fine with this 3ware/LSI card ---Mike On 1/3/2011 3:58 PM, Troy Beisigl wrote: > Hi All, > > We have been seeing a problem with FreeBSD 7.3 and up where the system > will just hang when using a 9650SE-2LP raid card and 2 500G drives > mirrored. The system will run for about a week and then the filesystem > just hangs, causing the system to hang. We've looked through the logs > and found nothing at all. We have changed the card and then the > motherboard but the problem still exists. We have run this card with > CentOS without fail in the same system configuration. > > If the card is not supported, can anyone recommend one that does work? > > Thanks, > > Troy Beisigl > > > > > _______________________________________________ > freebsd-questions@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-questions > To unsubscribe, send any mail to > "freebsd-questions-unsubscribe@freebsd.org" > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4D224046.4050307>