Date: Sat, 18 Aug 2018 08:43:32 +0200 From: Marcin Wojtas <mw@semihalf.com> To: marklmi@yahoo.com Cc: freebsd-arm <freebsd-arm@freebsd.org>, Jim Thompson <jim@netgate.com> Subject: Re: MACCHIATObin Message-ID: <CAPv3WKeuN3TwOEBR6zu_9ovyvvQUD4t83shgT0LTbtD1re6ikQ@mail.gmail.com> In-Reply-To: <F8B5248A-7522-4268-A72A-DBA04D943046@netgate.com> References: <4DCCA5C9-C156-4080-A8F9-035478AC2FF7@yahoo.com> <F8B5248A-7522-4268-A72A-DBA04D943046@netgate.com>
next in thread | previous in thread | raw e-mail | index | archive | help
sob., 18 sie 2018 o 01:10 Jim Thompson <jim@netgate.com> napisa=C5=82(a): > > > > On Aug 17, 2018, at 5:42 PM, Mark Millard via freebsd-arm <freebsd-arm@fr= eebsd.org> wrote: > > > Marcin Wojtas mw at semihalf.com wrote on > > Fri May 11 07:55:40 UTC 2018 : > > > >> Short status of the support - last year we enabled most of the > >> platform functionalities (core support, USB, AHCI, RTC). Three big > >> items remained left: > >> - PCIE root complex (this should work soon with the work done for > >> another SoC, not merged yet) > >> - Network PPv2 > >> - Xenon SD/MMC controller > > > > > > I noticed a check in that deals with that "Xenon" > > SD/MMC controller: > > > > Author: loos > > Date: Tue Aug 14 16:33:30 2018 > > New Revision: 337772 > > URL: > > https://svnweb.freebsd.org/changeset/base/337772 > > > > > > Log: > > Add support to the Marvell Xenon SDHCI controller. > > > > Tested on Espresso.bin (37x0) and Macchiato.bin (8k) with SD cards and > > eMMCs. > > > > Obtained from: pfSense > > Sponsored by: Rubicon Communications, LLC (Netgate) > > > > Added: > > head/sys/dev/sdhci/sdhci_xenon.c (contents, props changed) > > head/sys/dev/sdhci/sdhci_xenon.h (contents, props changed) > > Modified: > > head/sys/arm64/conf/GENERIC > > head/sys/conf/files.arm64 > > . . . > > > > But I've not noticed check-ins for the other of the "big > > items" going by. (Though they may have.) > > > > Care to comment-on/update-the actual status for the > > Macchiato.bin(s)? > > > tl;dr: It=E2=80=99s not =E2=80=98there=E2=80=99 yet. > > Specifics: > > - loos@ has done a lot of work to get the espresso.bin working, and some = of this carries over to the 8k/7k. > - We have another internal developer working on an EIP-97 driver for cryp= to offload. This should be a foundation for the EIP-197 in the 8K. > - I know manu@is working on pin controllers and clocks specific to Machia= tto.bin (80x0/70x0). > - Getting the NICs, PCIe, etc working still remains to be done. > About the latter - the NIC is pretty complex, however we (Semihalf) have really huge experience with all its support implementations and the platform itself. I'll put it straightforward - it's only a matter of development funding, if it's guaranteed, we will do it with pleasure :) As well as the NIC support (DW Synopsys driver for DT and verify/improve on pcie-host-generic with ACPI). Best regards, Marcin
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAPv3WKeuN3TwOEBR6zu_9ovyvvQUD4t83shgT0LTbtD1re6ikQ>