Date: Wed, 4 May 2005 14:27:24 +0000 From: Vittorio <v.demartino2@virgilio.it> To: freebsd-questions@freebsd.org Subject: Re: Problems with user ppp Message-ID: <200505041427.24993.v.demartino2@virgilio.it> In-Reply-To: <MIEPLLIBMLEEABPDBIEGKEAEHEAA.bob@a1poweruser.com> References: <MIEPLLIBMLEEABPDBIEGKEAEHEAA.bob@a1poweruser.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Alle 21:38, marted=EC 3 maggio 2005, bob@a1poweruser.com ha scritto: > Log has this > ppp[505]: tun0: IPCP: =A0PRIDNS[6] 10.155.201.22 > which means your ISP has handed you ip =A0 =A0 10.155.201.22 is dsn > server. > you say first line in /etc/resolv.conf =A0is 10.255.201.22 > Are you sure you posted the correct stuff here. that number is to > close not to be typo. > Try deleting contents of /var/log/ppp.log and /etc/resolve.conf and > restart user-ppp to get good documented test. > > Looks to me as your user ppp is functioning correctly. > Your firewall is not allowing out port 53 to ip 10.155.201.22 is > more likely cause of your problem. > I confirm that my office lan is made of 10.155.x.x addresses and when I=20 connect to it via dhcp I find 2 addresses of that kind in /etc/resolv.conf. Anyway, I've just repeated the "experiment" with user ppp keeping the same= =20 ppp.conf ... and: 1) Nothing written into /etc/resolv.conf 2) Neither ppp.linkup nor ppp.linkdown are present in my /etc/ppp 3) Issued "ppp -background alice" ppp[602]: Phase: Using interface: tun0 ppp[602]: Phase: deflink: Created in closed state ppp[602]: tun0: Command: default: ident user-ppp VERSION (built=20 COMPILATIONDATE) ppp[602]: tun0: Command: default: set device /dev/cuaa0 ppp[602]: tun0: Command: default: set speed 115200 ppp[602]: tun0: Command: default: set dial ABORT BUSY ABORT NO\sCARRIER=20 TIMEOUT 5 "" AT OK-AT-OK ATE1Q0 OK \dATDT\T TIMEOUT 40 CONNECT ppp[602]: tun0: Command: default: set timeout 180 ppp[602]: tun0: Command: default: enable dns ppp[602]: tun0: Command: alice: set phone 0,7020803380 ppp[602]: tun0: Command: alice: set authname pippolino@tin.it ppp[602]: tun0: Command: alice: set authkey ******** ppp[602]: tun0: Command: alice: set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.25= 5.0=20 0.0.0.0 ppp[602]: tun0: Command: alice: add default HISADDR ppp[603]: tun0: Phase: PPP Started (background mode). ppp[603]: tun0: Phase: bundle: Establish ppp[603]: tun0: Phase: deflink: closed -> opening ppp[603]: tun0: Phase: deflink: Connected! ppp[603]: tun0: Phase: deflink: opening -> dial ppp[603]: tun0: Chat: Phone: 0,7020803380 ppp[603]: tun0: Chat: deflink: Dial attempt 1 of 1 ppp[603]: tun0: Chat: Send: AT^M ppp[603]: tun0: Chat: Expect(5): OK ppp[603]: tun0: Chat: Received: AT^M^M ppp[603]: tun0: Chat: Received: OK^M ppp[603]: tun0: Chat: Send: ATE1Q0^M ppp[603]: tun0: Chat: Expect(5): OK ppp[603]: tun0: Chat: Received: ATE1Q0^M^M ppp[603]: tun0: Chat: Received: OK^M ppp[603]: tun0: Chat: Send: ATDT0,7020803380^M ppp[603]: tun0: Chat: Expect(40): CONNECT ppp[603]: tun0: Chat: Received: ATDT0,7020803380^M^M ppp[603]: tun0: Chat: Received: CONNECT 54666/ARQ/V90/LAPM/V42BIS^M ppp[603]: tun0: Phase: deflink: dial -> carrier ppp[603]: tun0: Phase: deflink: /dev/cuaa0: CD detected ppp[603]: tun0: Phase: deflink: carrier -> login ppp[603]: tun0: Phase: deflink: login -> lcp ppp[603]: tun0: LCP: FSM: Using "deflink" as a transport ppp[603]: tun0: LCP: deflink: State change Initial --> Closed ppp[603]: tun0: LCP: deflink: State change Closed --> Stopped ppp[603]: tun0: LCP: deflink: LayerStart ppp[603]: tun0: LCP: deflink: SendConfigReq(1) state =3D Stopped ppp[603]: tun0: LCP: ACFCOMP[2] ppp[603]: tun0: LCP: PROTOCOMP[2] ppp[603]: tun0: LCP: ACCMAP[6] 0x00000000 ppp[603]: tun0: LCP: MRU[4] 1500 ppp[603]: tun0: LCP: MAGICNUM[6] 0xea54429a ppp[603]: tun0: LCP: deflink: State change Stopped --> Req-Sent ppp[603]: tun0: LCP: deflink: RecvConfigReq(1) state =3D Req-Sent ppp[603]: tun0: LCP: MRU[4] 1524 ppp[603]: tun0: LCP: ACCMAP[6] 0x000a0000 ppp[603]: tun0: LCP: AUTHPROTO[5] 0xc223 (CHAP 0x05) ppp[603]: tun0: LCP: PROTOCOMP[2] ppp[603]: tun0: LCP: ACFCOMP[2] ppp[603]: tun0: LCP: MRRU[4] 1524 ppp[603]: tun0: LCP: ENDDISC[9] Local Addr: stack1 ppp[603]: tun0: LCP: deflink: SendConfigRej(1) state =3D Req-Sent ppp[603]: tun0: LCP: MRRU[4] 1524 ppp[603]: tun0: LCP: deflink: SendIdent(0) state =3D Req-Sent ppp[603]: tun0: LCP: MAGICNUM ea54429a ppp[603]: tun0: LCP: TEXT user-ppp 3.4.2 (built Apr 26 2005) ppp[603]: tun0: LCP: deflink: RecvConfigAck(1) state =3D Req-Sent ppp[603]: tun0: LCP: ACFCOMP[2] ppp[603]: tun0: LCP: PROTOCOMP[2] ppp[603]: tun0: LCP: ACCMAP[6] 0x00000000 ppp[603]: tun0: LCP: MRU[4] 1500 ppp[603]: tun0: LCP: MAGICNUM[6] 0xea54429a ppp[603]: tun0: LCP: deflink: State change Req-Sent --> Ack-Rcvd ppp[603]: tun0: LCP: deflink: RecvConfigReq(2) state =3D Ack-Rcvd ppp[603]: tun0: LCP: MRU[4] 1524 ppp[603]: tun0: LCP: ACCMAP[6] 0x000a0000 ppp[603]: tun0: LCP: AUTHPROTO[5] 0xc223 (CHAP 0x05) ppp[603]: tun0: LCP: PROTOCOMP[2] ppp[603]: tun0: LCP: ACFCOMP[2] ppp[603]: tun0: LCP: ENDDISC[9] Local Addr: stack1 ppp[603]: tun0: LCP: deflink: SendConfigAck(2) state =3D Ack-Rcvd ppp[603]: tun0: LCP: MRU[4] 1524 ppp[603]: tun0: LCP: ACCMAP[6] 0x000a0000 ppp[603]: tun0: LCP: AUTHPROTO[5] 0xc223 (CHAP 0x05) ppp[603]: tun0: LCP: PROTOCOMP[2] ppp[603]: tun0: LCP: ACFCOMP[2] ppp[603]: tun0: LCP: ENDDISC[9] Local Addr: stack1 ppp[603]: tun0: LCP: deflink: State change Ack-Rcvd --> Opened ppp[603]: tun0: LCP: deflink: LayerUp ppp[603]: tun0: LCP: deflink: SendIdent(1) state =3D Opened ppp[603]: tun0: LCP: MAGICNUM ea54429a ppp[603]: tun0: LCP: TEXT user-ppp 3.4.2 (built Apr 26 2005) ppp[603]: tun0: Phase: bundle: Authenticate ppp[603]: tun0: Phase: deflink: his =3D CHAP 0x05, mine =3D none ppp[603]: tun0: Phase: Chap Input: CHALLENGE (16 bytes from apx-rm5) ppp[603]: tun0: Phase: Chap Output: RESPONSE (pippolino@tin.it) ppp[603]: tun0: Phase: Chap Input: SUCCESS ppp[603]: tun0: IPCP: Using trigger address 0.0.0.0 ppp[603]: tun0: CCP: FSM: Using "deflink" as a transport ppp[603]: tun0: CCP: deflink: State change Initial --> Closed ppp[603]: tun0: CCP: deflink: LayerStart. ppp[603]: tun0: CCP: MPPE: Not usable without CHAP81 ppp[603]: tun0: CCP: deflink: SendConfigReq(1) state =3D Closed ppp[603]: tun0: CCP: DEFLATE[4] win 15 ppp[603]: tun0: CCP: PRED1[2] ppp[603]: tun0: CCP: deflink: State change Closed --> Req-Sent ppp[603]: tun0: Phase: deflink: lcp -> open ppp[603]: tun0: Phase: bundle: Network ppp[603]: tun0: IPCP: FSM: Using "deflink" as a transport ppp[603]: tun0: IPCP: deflink: State change Initial --> Closed ppp[603]: tun0: IPCP: deflink: LayerStart. ppp[603]: tun0: IPCP: deflink: SendConfigReq(1) state =3D Closed ppp[603]: tun0: IPCP: IPADDR[6] 0.0.0.0 ppp[603]: tun0: IPCP: COMPPROTO[6] 16 VJ slots with slot compression ppp[603]: tun0: IPCP: PRIDNS[6] 255.255.255.255 ppp[603]: tun0: IPCP: SECDNS[6] 255.255.255.255 ppp[603]: tun0: IPCP: deflink: State change Closed --> Req-Sent ppp[603]: tun0: IPCP: deflink: RecvConfigReq(1) state =3D Req-Sent ppp[603]: tun0: IPCP: COMPPROTO[6] 16 VJ slots with slot compression ppp[603]: tun0: IPCP: IPADDR[6] 80.21.255.5 ppp[603]: tun0: IPCP: deflink: SendConfigAck(1) state =3D Req-Sent ppp[603]: tun0: IPCP: COMPPROTO[6] 16 VJ slots with slot compression ppp[603]: tun0: IPCP: IPADDR[6] 80.21.255.5 ppp[603]: tun0: IPCP: deflink: State change Req-Sent --> Ack-Sent ppp[603]: tun0: LCP: deflink: RecvProtocolRej(3) state =3D Opened ppp[603]: tun0: LCP: deflink: -- Protocol 0x80fd (Compression Control=20 Protocol) was rejected! ppp[603]: tun0: CCP: deflink: State change Req-Sent --> Stopped ppp[603]: tun0: IPCP: deflink: RecvConfigNak(1) state =3D Ack-Sent ppp[603]: tun0: IPCP: IPADDR[6] 212.216.149.56 ppp[603]: tun0: IPCP: IPADDR[6] changing address: 0.0.0.0 --> 212.216.149= =2E56 ppp[603]: tun0: IPCP: PRIDNS[6] 255.255.255.255 ppp[603]: tun0: IPCP: SECDNS[6] 255.255.255.255 ppp[603]: tun0: IPCP: Primary nameserver set to 255.255.255.255 ppp[603]: tun0: IPCP: deflink: SendConfigReq(2) state =3D Ack-Sent ppp[603]: tun0: IPCP: IPADDR[6] 212.216.149.56 ppp[603]: tun0: IPCP: COMPPROTO[6] 16 VJ slots with slot compression ppp[603]: tun0: IPCP: PRIDNS[6] 255.255.255.255 ppp[603]: tun0: IPCP: SECDNS[6] 255.255.255.255 ppp[603]: tun0: IPCP: deflink: RecvConfigAck(2) state =3D Ack-Sent ppp[603]: tun0: IPCP: IPADDR[6] 212.216.149.56 ppp[603]: tun0: IPCP: COMPPROTO[6] 16 VJ slots with slot compression ppp[603]: tun0: IPCP: PRIDNS[6] 255.255.255.255 ppp[603]: tun0: IPCP: SECDNS[6] 255.255.255.255 ppp[603]: tun0: IPCP: deflink: State change Ack-Sent --> Opened ppp[603]: tun0: IPCP: deflink: LayerUp. ppp[603]: tun0: IPCP: myaddr 212.216.149.56 hisaddr =3D 80.21.255.5 ppp[602]: tun0: Phase: Parent: PPP enabled ppp[603]: tun0: Chat: Parent notified of success 4) Now in /etc/resolv.conf that was empty there's "nameserver=20 255.255.255.255" !!! Therefore, I understand that ppp is unable to get the dns name files from = the=20 ISP? Am I right? What to do next? Vittorio
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200505041427.24993.v.demartino2>