Date: Fri, 14 Jun 1996 14:26:29 -0400 (EDT) From: Frank Seltzer <frankd@yoda.fdt.net> To: hawky/Hawksmom <hawk2@netcom.com> Cc: questions@freebsd.org Subject: Re: I am still having modem problems Message-ID: <Pine.BSF.3.91.960614141623.178F-100000@Kryten.nina.com> In-Reply-To: <Pine.3.89.9606140908.A25885-0100000@netcom6>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, 14 Jun 1996, hawky/Hawksmom wrote: > > I was able to use the modme viauser ppp's 'term' feature. but after > getting my local ethernet working, my modem was no longer useable. It > was being used on /dev/cuaa0. now dmesg shows it being found on sio1. > When I tired setting everything to cuaa1 term lets me connect, to the > modem (when set to cuaa0 it says failed to connect to modem), but I can't sio1 equates to cuaa1 > type anything to it. I have tried everything I can possibly think of. did you try ppp's term mode? First type 'set modem /dev/cuaa1', then type 'term' at the ppp > prompt(no quotes). This will let you use the Hayes AT command set to talk to your modem. > Below is any file I think could be of any use to solving this, also since > I am new to freebsd if you see anything else that doesn't seem right > below let me know ;) > > I am thinking maybe my modem just went bad or something. > /etc/sysconfig: > # ifconfig_cuaa0="inet 192.215.166.87 netmask 255.255.255.0" Change this from ifconfig_cuaa0 to ifconfig_tun0 and uncomment it. > sio0 not found at 0x3f8 > sio1 at 0x2f8-0x2ff irq 3 on isa > sio1: type 16550A You have a modem on com2 and no com1 at all? > /etc/ppp/ppp.conf: > # Default setup. Executed always when PPP is invoked. > # > default: > set device /dev/cuaa0 If your modem is on what DOS calls com2, change this to /dev/cuaa1 Frank -- Only in America can a homeless veteran sleep in a cardboard box while a draft dodger sleeps in the White House. <unknown>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.91.960614141623.178F-100000>