Date: Sun, 23 Aug 1998 23:08:25 -0700 (PDT) From: asami@FreeBSD.ORG (Satoshi Asami) To: ac199@hwcn.org Cc: vanilla@FreeBSD.ORG, ports@FreeBSD.ORG Subject: Re: manpages (Re: cvs commit: ports/devel/p5-Term-Query p5-Term-Query-2.0.tgz) Message-ID: <199808240608.XAA02385@silvia.hip.berkeley.edu> In-Reply-To: <Pine.BSF.3.96.980823214748.1077B-100000@localhost> (message from Tim Vanderhoek on Sun, 23 Aug 1998 22:04:10 -0400 (EDT))
next in thread | previous in thread | raw e-mail | index | archive | help
* > MANCOMPRESSED=yes: manpage is compressed
* > MANCOMPRESSED=no: manpage is not compressed
* > MANCOMPRESSED=maybe: honors NOMANCOMPRESS
*
* It might also be worthwhile to create an appropriate
* compress-man: target.
Oops, forgot this one. Fixed, here's another diff (sorry).
* Actually, some of these ports with several hundred manpages
* become rather cumbersome when each manpage has to be listed in
* Makefile... I wonder... ;-)
Well, it's shorter than listing in PLISTs. ;)
What do you think, should we make standard include files for manpages
in case it's too long for inclusion in the Makefile? I can certainly
add something like
===
.for sect in 1 2 3 4 5 6 7 8 9
.if exists(${PKGDIR}/MAN${sect})
MAN${sect}+= ${CAT} ${PKGDIR}/MAN${sect}
.endif
.endfor
===
Satoshi
-------
Index: bsd.port.mk
===================================================================
RCS file: /home/ncvs/src/share/mk/bsd.port.mk,v
retrieving revision 1.227.2.46
diff -u -r1.227.2.46 bsd.port.mk
--- bsd.port.mk 1998/08/15 17:37:46 1.227.2.46
+++ bsd.port.mk 1998/08/24 06:02:40
@@ -11,186 +11,188 @@
# There are two different types of "maintainers" in the whole ports
# framework concept. Maintainers of the bsd.port*.mk files
-# are listed below in the ${OSNAME}_MAINTAINER entries (this file
+# are listed below in the ${OPSYS}_MAINTAINER entries (this file
# is used by multiple *BSD flavors). You should consult them directly
# if you have any questions/suggestions regarding this file since only
# they are allowed to modify the master copies in the CVS repository!
+FreeBSD_MAINTAINER= asami@FreeBSD.ORG
+OpenBSD_MAINTAINER= imp@OpenBSD.ORG
+
# For each port, the MAINTAINER variable is what you should consult for
# contact information on the person(s) to contact if you have questions/
# suggestions about that specific port. By default (if no MAINTAINER
# is listed), a port is maintained by the subscribers of the ports@freebsd.org
# mailing list, and any correspondece should be directed there.
#
-FreeBSD_MAINTAINER= asami@FreeBSD.ORG
-OpenBSD_MAINTAINER= imp@OpenBSD.ORG
-
-# Supported Variables and their behaviors:
+# MAINTAINER - The e-mail address of the contact person for this port
+# (default: ports@FreeBSD.ORG).
#
-# Variables that typically apply to all ports:
+# These are meta-variables that are automatically set to the system
+# you are running on.
#
# ARCH - The architecture, as returned by "uname -m".
# OPSYS - Portability clause. This is the operating system the
# makefile is being used on. Automatically set to
# "FreeBSD," "NetBSD," or "OpenBSD" as appropriate.
# OSREL - The release version (numeric) of the operating system.
-# PORTSDIR - The root of the ports tree. Defaults:
-# FreeBSD/OpenBSD: /usr/ports
-# NetBSD: /usr/opt
-# DISTDIR - Where to get gzip'd, tarballed copies of original sources
-# (default: ${PORTSDIR}/distfiles).
-# PREFIX - Where to install things in general (default: /usr/local).
-# MASTER_SITES - Primary location(s) for distribution files if not found
-# locally.
-# PATCH_SITES - Primary location(s) for distribution patch files
-# (see PATCHFILES below) if not found locally.
#
-# MASTER_SITE_BACKUP - Backup location(s) for distribution files and patch
-# files if not found locally and ${MASTER_SITES}/${PATCH_SITES}
-# (default:
-# ftp://ftp.freebsd.org/pub/FreeBSD/distfiles/${DIST_SUBDIR}/)
-# MASTER_SITE_OVERRIDE - If set, override the MASTER_SITES setting with this
-# value.
-# MASTER_SITE_FREEBSD - If set, only use ${MASTER_SITE_BACKUP} for
-# MASTER_SITES.
-# PACKAGES - A top level directory where all packages go (rather than
-# going locally to each port). (default: ${PORTSDIR}/packages).
-# GMAKE - Set to path of GNU make if not in $PATH (default: gmake).
-# AUTOCONF - Set to path of GNU autoconf if not in $PATH (default: autoconf).
-# XMKMF - Set to path of `xmkmf' if not in $PATH (default: xmkmf -a ).
-# MAINTAINER - The e-mail address of the contact person for this port
-# (default: ports@FreeBSD.ORG).
+# These variables are used to identify your port.
+#
+# DISTNAME - Name of port or distribution.
+# PKGNAME - Name of the package file to create if the DISTNAME
+# isn't really relevant for the port/package
+# (default: ${DISTNAME}).
# CATEGORIES - A list of descriptive categories into which this port falls.
#
-# Variables that typically apply to an individual port. Non-Boolean
-# variables without defaults are *mandatory*.
+# These variable describe how to fetch files required for building the port.
#
-# WRKDIR - A temporary working directory that gets *clobbered* on clean
-# (default: ${.CURDIR}/work).
-# WRKSRC - A subdirectory of ${WRKDIR} where the distribution actually
-# unpacks to. (Default: ${WRKDIR}/${DISTNAME} unless
-# NO_WRKSUBDIR is set, in which case simply ${WRKDIR}).
-# DISTNAME - Name of port or distribution.
# DISTFILES - Name(s) of archive file(s) containing distribution
-# (default: ${DISTNAME}${EXTRACT_SUFX}).
+# (default: ${DISTNAME}${EXTRACT_SUFX}). Set this to
+# an empty string if the port doesn't require it.
+# EXTRACT_SUFX - Suffix for archive names (default: .tar.gz). You
+# never have to set both DISTFILES and EXTRACT_SUFX.
+# MASTER_SITES - Primary location(s) for distribution files if not found
+# locally.
# PATCHFILES - Name(s) of additional files that contain distribution
# patches (default: none). make will look for them at
-# PATCH_SITES (see above). They will automatically be
+# PATCH_SITES (see below). They will automatically be
# uncompressed before patching if the names end with
# ".gz" or ".Z".
+# PATCH_SITES - Primary location(s) for distribution patch files
+# if not found locally.
# DIST_SUBDIR - Suffix to ${DISTDIR}. If set, all ${DISTFILES}
# and ${PATCHFILES} will be put in this subdirectory of
-# ${DISTDIR}. Also they will be fetched in this subdirectory
-# from FreeBSD mirror sites.
+# ${DISTDIR} (see below). Also they will be fetched in
+# this subdirectory from FreeBSD mirror sites.
# ALLFILES - All of ${DISTFILES} and ${PATCHFILES}.
# IGNOREFILES - If some of the ${ALLFILES} are not checksum-able, set
# this variable to their names.
-# PKGNAME - Name of the package file to create if the DISTNAME
-# isn't really relevant for the port/package
-# (default: ${DISTNAME}).
# EXTRACT_ONLY - If defined, a subset of ${DISTFILES} you want to
# actually extract.
-# PATCHDIR - A directory containing any additional patches you made
-# to port this software to FreeBSD (default:
-# ${.CURDIR}/patches)
-# SCRIPTDIR - A directory containing any auxiliary scripts
-# (default: ${.CURDIR}/scripts)
-# FILESDIR - A directory containing any miscellaneous additional files.
-# (default: ${.CURDIR}/files)
-# PKGDIR - A direction containing any package creation files.
-# (default: ${.CURDIR}/pkg)
-# PKG_DBDIR - Where package installation is recorded (default: /var/db/pkg)
-# FORCE_PKG_REGISTER - If set, it will overwrite any existing package
-# registration information in ${PKG_DBDIR}/${PKGNAME}.
-# NO_MTREE - If set, will not invoke mtree from bsd.port.mk from
-# the "install" target.
-# MTREE_FILE - The name of the mtree file (default: /etc/mtree/BSD.x11.dist
-# if USE_X_PREFIX is set, /etc/mtree/BSD.local.dist
-# otherwise.)
#
-# NO_BUILD - Use a dummy (do-nothing) build target.
-# NO_CDROM - Port may not go on CDROM. Set this string to reason.
-# NO_DESCRIBE - Use a dummy (do-nothing) describe target.
-# NO_EXTRACT - Use a dummy (do-nothing) extract target.
-# NO_INSTALL - Use a dummy (do-nothing) install target.
-# NO_PACKAGE - Use a dummy (do-nothing) package target.
-# NO_LATEST_LINK - Do not install the "Latest" link for package. Define this
-# if this port is a beta version of another stable port
-# which is also in the tree.
-# NO_PKG_REGISTER - Don't register a port install as a package.
-# NO_WRKSUBDIR - Assume port unpacks directly into ${WRKDIR}.
-# NO_WRKDIR - There's no work directory at all; port does this someplace
-# else.
-# NO_DEPENDS - Don't verify build of dependencies.
-# BROKEN - Port is broken. Set this string to the reason why.
-# RESTRICTED - Port is restricted. Set this string to the reason why.
+# These three variables are typically set in /etc/make.conf to indicate
+# the user's preferred location to fetch files from.
+#
+# MASTER_SITE_BACKUP - Backup location(s) for distribution files and patch
+# files if not found locally and ${MASTER_SITES}/${PATCH_SITES}
+# (default:
+# ftp://ftp.freebsd.org/pub/FreeBSD/distfiles/${DIST_SUBDIR}/)
+# MASTER_SITE_OVERRIDE - If set, override the MASTER_SITES setting with this
+# value.
+# MASTER_SITE_FREEBSD - If set, only use ${MASTER_SITE_BACKUP} for
+# MASTER_SITES.
+#
+# Set these if your port should not be built under certain circumstances.
+# These are string variables; you should set them to the reason why
+# they are restricted.
+#
+# RESTRICTED - Port is restricted (e.g., contains cryptography, etc.).
+# NO_CDROM - Port may not go on CDROM.
+# NO_PACKAGE - Port should not be packaged but distfiles can be put on
+# ftp sites and CDROMs.
+# BROKEN - Port is broken.
+#
+# This variable is a boolean, so you don't need to set it to the reason.
+#
+# IS_INTERACTIVE - Set this if your port needs to interact with the user
+# during a build. User can then decide to skip this port by
+# setting ${BATCH}, or compiling only the interactive ports
+# by setting ${INTERACTIVE}.
+#
+# Use these if your port uses some of the common software packages.
+#
# USE_GMAKE - Says that the port uses gmake.
+# GMAKE - Set to path of GNU make if not in $PATH (default: gmake).
# USE_AUTOCONF - Says that the port uses autoconf. Implies GNU_CONFIGURE.
+# AUTOCONF - Set to path of GNU autoconf if not in $PATH (default:
+# autoconf).
# USE_PERL5 - Says that the port uses perl5 for building and running.
+# PERL_VERSION - Full version of perl5 (see below for current value).
+# PERL_VER - Short version of perl5 (see below for current value).
# USE_IMAKE - Says that the port uses imake. Implies USE_X_PREFIX.
-# USE_X_PREFIX - Says that the port installs in ${X11BASE}. Implies USE_XLIB.
-# USE_XLIB - Says that the port uses X libraries.
+# XMKMF - Set to path of `xmkmf' if not in $PATH (default: xmkmf -a ).
# NO_INSTALL_MANPAGES - For imake ports that don't like the install.man
# target.
-# HAS_CONFIGURE - Says that the port has its own configure script.
-# GNU_CONFIGURE - Set if you are using GNU configure (optional).
-# CONFIGURE_SCRIPT - Name of configure script, defaults to 'configure'.
-# CONFIGURE_ARGS - Pass these args to configure if ${HAS_CONFIGURE} is set.
-# CONFIGURE_ENV - Pass these env (shell-like) to configure if
-# ${HAS_CONFIGURE} is set.
-# SCRIPTS_ENV - Additional environment vars passed to scripts in
-# ${SCRIPTDIR} executed by bsd.port.mk.
-# MAKE_ENV - Additional environment vars passed to sub-make in build
-# stage.
-# IS_INTERACTIVE - Set this if your port needs to interact with the user
-# during a build. User can then decide to skip this port by
-# setting ${BATCH}, or compiling only the interactive ports
-# by setting ${INTERACTIVE}.
-# FETCH_DEPENDS - A list of "path:dir" pairs of other ports this
+# USE_X_PREFIX - Says that the port installs in ${X11BASE}. Implies USE_XLIB.
+# USE_XLIB - Says that the port uses X libraries.
+# USE_QT - Says that the port uses the latest version of qt toolkit.
+#
+# Dependency checking. Use these if your port requires another port
+# not in the list above.
+#
+# FETCH_DEPENDS - A list of "path:dir[:target]" tuples of other ports this
# package depends in the "fetch" stage. "path" is the
# name of a file if it starts with a slash (/), an
# executable otherwise. make will test for the
# existence (if it is a full pathname) or search for
# it in your $PATH (if it is an executable) and go
# into "dir" to do a "make all install" if it's not
-# found.
-# BUILD_DEPENDS - A list of "path:dir" pairs of other ports this
+# found. If the third field ("target") exists, it will
+# be used instead of ${DEPENDS_TARGET}.
+# BUILD_DEPENDS - A list of "path:dir[:target]" tuples of other ports this
# package depends to build (between the "extract" and
# "build" stages, inclusive). The test done to
# determine the existence of the dependency is the
-# same as FETCH_DEPENDS.
-# RUN_DEPENDS - A list of "path:dir" pairs of other ports this
+# same as FETCH_DEPENDS. If the third field ("target")
+# exists, it will be used instead of ${DEPENDS_TARGET}.
+# RUN_DEPENDS - A list of "path:dir[:target]" tuples of other ports this
# package depends to run. The test done to determine
# the existence of the dependency is the same as
# FETCH_DEPENDS. This will be checked during the
# "install" stage and the name of the dependency will
-# be put into the package as well.
-# LIB_DEPENDS - A list of "lib:dir" pairs of other ports this package
-# depends on. "lib" is the name of a shared library.
+# be put into the package as well. If the third field
+# ("target") exists, it will be used instead of
+# ${DEPENDS_TARGET}.
+# LIB_DEPENDS - A list of "lib:dir[:target]" tuples of other ports this
+# package depends on. "lib" is the name of a shared library.
# make will use "ldconfig -r" to search for the
# library. Note that lib can be any regular expression,
# and you need two backslashes in front of dots (.) to
# supress its special meaning (e.g., use
# "foo\\.2\\.:${PORTSDIR}/utils/foo" to match "libfoo.2.*").
-# DEPENDS - A list of other ports this package depends on being
-# made first. Use this for things that don't fall into
-# the above two categories.
-# EXTRACT_CMD - Command for extracting archive (default: tar).
-# EXTRACT_SUFX - Suffix for archive names (default: .tar.gz).
-# EXTRACT_BEFORE_ARGS -
-# Arguments to ${EXTRACT_CMD} before filename
-# (default: -xzf).
-# EXTRACT_AFTER_ARGS -
-# Arguments to ${EXTRACT_CMD} following filename
-# (default: none).
+# If the third field ("target") exists, it will be used
+# instead of ${DEPENDS_TARGET}.
+# DEPENDS - A list of "dir[:target]" tuples of other ports this
+# package depends on being made first. Use this only for
+# things that don't fall into the above four categories.
+# If the second field ("target") exists, it will be used
+# instead of ${DEPENDS_TARGET}.
+# DEPENDS_TARGET - The default target to execute when a port is calling a
+# dependency (default: "install").
#
-# FETCH_CMD - Full path to ftp/http fetch command if not in $PATH
-# (default: /usr/bin/fetch).
-# FETCH_BEFORE_ARGS -
-# Arguments to ${FETCH_CMD} before filename (default: none).
-# FETCH_AFTER_ARGS -
-# Arguments to ${FETCH_CMD} following filename (default: none).
+# Various directory definitions and variables to control them.
+# You rarely need to redefine any of these except WRKSRC and NO_WRKSUBDIR.
#
+# X11BASE - Where X11 ports install things (default: /usr/X11R6).
+# LOCALBASE - Where non-X11 ports install things (default: /usr/local).
+# PREFIX - Where *this* port installs its files (default: ${X11BASE}
+# if USE_X_PREFIX is set, otherwise ${LOCALBASE}).
+# PORTSDIR - The root of the ports tree. Defaults:
+# FreeBSD/OpenBSD: /usr/ports
+# NetBSD: /usr/opt
+# DISTDIR - Where to get gzip'd, tarballed copies of original sources
+# (default: ${PORTSDIR}/distfiles).
+# PACKAGES - A top level directory where all packages go (rather than
+# going locally to each port). (default: ${PORTSDIR}/packages).
+# WRKDIR - A temporary working directory that gets *clobbered* on clean
+# (default: ${.CURDIR}/work).
+# WRKSRC - A subdirectory of ${WRKDIR} where the distribution actually
+# unpacks to. (Default: ${WRKDIR}/${DISTNAME} unless
+# NO_WRKSUBDIR is set, in which case simply ${WRKDIR}).
+# NO_WRKSUBDIR - Assume port unpacks directly into ${WRKDIR}.
+# NO_WRKDIR - There's no work directory at all; port does this someplace
+# else.
+# PATCHDIR - A directory containing any additional patches you made
+# to port this software to FreeBSD (default:
+# ${.CURDIR}/patches)
+# SCRIPTDIR - A directory containing any auxiliary scripts
+# (default: ${.CURDIR}/scripts)
+# FILESDIR - A directory containing any miscellaneous additional files.
+# (default: ${.CURDIR}/files)
+# PKGDIR - A direction containing any package creation files.
+# (default: ${.CURDIR}/pkg)
+#
# Motif support:
#
# REQUIRES_MOTIF - Set this in your port if it requires Motif. It will be
@@ -205,15 +207,6 @@
# MOTIF_ONLY - If set, build Motif ports only. (Not much use except for
# building packages.)
#
-# Variables to change if you want a special behavior:
-#
-# ECHO_MSG - Used to print all the '===>' style prompts - override this
-# to turn them off (default: /bin/echo).
-# DEPENDS_TARGET - The target to execute when a port is calling a
-# dependency (default: "install").
-# PATCH_DEBUG - If set, print out more information about the patches as
-# it attempts to apply them.
-#
# Variables that serve as convenient "aliases" for your *-install targets.
# Use these like: "${INSTALL_PROGRAM} ${WRKSRC}/prog ${PREFIX}/bin".
#
@@ -222,15 +215,24 @@
# INSTALL_DATA - A command to install sharable data.
# INSTALL_MAN - A command to install manpages (doesn't compress).
#
-# If your port doesn't automatically compress manpages, set the following.
-# Depending on the setting of NOMANCOMPRESS, the make rules will compress
-# the manpages for you.
+# Set the following to specify all manpages that your port installs.
+# These manpages will be automatically listed in ${PLIST}. Depending
+# on the setting of NOMANCOMPRESS, the make rules will compress the
+# manpages for you.
#
# MAN<sect> - A list of manpages, categorized by section. For
# example, if your port has "man/man1/foo.1" and
# "man/mann/bar.n", set "MAN1=foo.1" and "MANN=bar.n".
# The available sections chars are "123456789LN".
# MANPREFIX - The directory prefix for ${MAN<sect>} (default: ${PREFIX}).
+# MAN<sect>PREFIX - If manual pages of some sections install in different
+# locations than others, use these (default: ${MANPREFIX}).
+# MANCOMPRESSED - This variable can take values "yes", "no" or
+# "maybe". "yes" means manpages are installed
+# compressed; "no" means they are not; "maybe" means
+# it changes depending on the value of
+# NOMANCOMPRESS. The default is "yes" if USE_IMAKE
+# is set and "no" if not.
#
# Default targets and their behaviors:
#
@@ -264,6 +266,106 @@
#
# NEVER override the "regular" targets unless you want to open
# a major can of worms.
+#
+# Set these variables if your port doesn't need some of the steps.
+# Note that there are no NO_PATCH or NO_CONFIGURE variables becuase
+# those steps are empty by default. Also, NO_CHECKSUM is a user variable
+# and is not to be set in a port's Makefile. See above for NO_PACKAGE.
+#
+# NO_EXTRACT - Use a dummy (do-nothing) extract target.
+# NO_BUILD - Use a dummy (do-nothing) build target.
+# NO_INSTALL - Use a dummy (do-nothing) install target.
+#
+# Here are some variables used in various stages.
+#
+# For fetch:
+#
+# FETCH_CMD - Full path to ftp/http fetch command if not in $PATH
+# (default: /usr/bin/fetch).
+# FETCH_BEFORE_ARGS -
+# Arguments to ${FETCH_CMD} before filename (default: none).
+# FETCH_AFTER_ARGS -
+# Arguments to ${FETCH_CMD} following filename (default: none).
+#
+# For extract:
+#
+# EXTRACT_CMD - Command for extracting archive (default: tar).
+# EXTRACT_BEFORE_ARGS -
+# Arguments to ${EXTRACT_CMD} before filename
+# (default: -xzf).
+# EXTRACT_AFTER_ARGS -
+# Arguments to ${EXTRACT_CMD} following filename
+# (default: none).
+#
+# For configure:
+#
+# HAS_CONFIGURE - Says that the port has its own configure script. The
+# configure stage will not do anything if this is not set.
+# GNU_CONFIGURE - Set if you are using GNU configure (optional). Implies
+# HAS_CONFIGURE.
+# CONFIGURE_SCRIPT - Name of configure script (defaults: configure).
+# CONFIGURE_ARGS - Pass these args to configure if ${HAS_CONFIGURE} is set.
+# CONFIGURE_ENV - Pass these env (shell-like) to configure if
+# ${HAS_CONFIGURE} is set.
+#
+# For build and install:
+#
+# MAKE_ENV - Additional environment vars passed to sub-make in build
+# and install stages (default: see below).
+#
+# For install:
+#
+# NO_MTREE - If set, will not invoke mtree from bsd.port.mk from
+# the "install" target.
+# MTREE_FILE - The name of the mtree file (default: /etc/mtree/BSD.x11.dist
+# if USE_X_PREFIX is set, /etc/mtree/BSD.local.dist
+# otherwise.)
+# PLIST - Name of the `packing list' file (default: ${PKGDIR}/PLIST).
+# Change this to ${WRKDIR}/PLIST or something if you
+# need to write to it. (It is not a good idea for a port
+# to write to any file outside ${WRKDIR} during a normal
+# build.)
+# TMPPLIST - Name of the `packing list' file after processing
+# (default: ${WRKDIR}/.PLIST.mktmp).
+# PLIST_SUB - List of "variable=value" pair for substitution in ${PLIST}
+# (default: see below).
+#
+# Note that the install target will automatically add manpages (see
+# above) and also substitute special sequence of characters (delimited
+# by "%%") as defined in PLIST_SUB to generate ${TMPPLIST}. For
+# instance, "OSREL=${OSREL}" in PLIST_SUB causes all occurrences of
+# "%%OSREL%%" in ${PLIST} to be substituted by the value of OSREL.
+# ${TMPPLIST} is generated between the do-install and post-install
+# stages. If you are generating the packing list on-the-fly, make
+# sure it's generated by the end of do-install!
+#
+# For package:
+#
+# NO_LATEST_LINK - Do not install the "Latest" link for package. Define this
+# if this port is a beta version of another stable port
+# which is also in the tree.
+#
+# This is used in all stages:
+#
+# SCRIPTS_ENV - Additional environment vars passed to scripts in
+# ${SCRIPTDIR} executed by bsd.port.mk (default: see below).
+#
+# Finally, variables to change if you want a special behavior. These
+# are for debugging purposes. Don't set them in your Makefile.
+#
+# ECHO_MSG - Used to print all the '===>' style prompts - override this
+# to turn them off (default: /bin/echo).
+# PATCH_DEBUG - If set, print out more information about the patches as
+# it attempts to apply them.
+# PKG_DBDIR - Where package installation is recorded (default: /var/db/pkg)
+# NO_PKG_REGISTER - Don't register a port install as a package.
+# FORCE_PKG_REGISTER - If set, it will overwrite any existing package
+# registration information in ${PKG_DBDIR}/${PKGNAME}.
+# NO_DEPENDS - Don't verify build of dependencies.
+# NO_CHECKSUM - Don't verify the checksum. Typically used when
+# when you noticed the distfile you just fetched has
+# a different checksum and you intend to verify if
+# the port still works with it.
# Get the architecture
ARCH!= uname -m
@@ -352,8 +454,23 @@
PKGDIR?= ${.CURDIR}/pkg
.endif
+.if defined(MANCOMPRESSED)
+.if ${MANCOMPRESSED} != yes && ${MANCOMPRESSED} != no && \
+ ${MANCOMPRESSED} != maybe
+.BEGIN:
+ @${ECHO_MSG} "Error: Value of MANCOMPRESSED (is \"${MANCOMPRESSED}\") can only be \"yes\", \"no\" or \"maybe\""
+ @${FALSE}
+.endif
+.endif
+
+.if defined(USE_IMAKE) && ${OPSYS} != OpenBSD
+MANCOMPRESSED?= yes
+.else
+MANCOMPRESSED?= no
+.endif
+
.if defined(USE_IMAKE)
-USE_X_PREFIX= yes
+USE_X_PREFIX= yes
.endif
.if defined(USE_X_PREFIX)
USE_XLIB= yes
@@ -424,7 +541,7 @@
MAKE_FLAGS?= -f
MAKEFILE?= Makefile
-MAKE_ENV+= PREFIX=${PREFIX} LOCALBASE=${LOCALBASE} X11BASE=${X11BASE} MOTIFLIB="${MOTIFLIB}" CFLAGS="${CFLAGS}"
+MAKE_ENV+= PREFIX=${PREFIX} LOCALBASE=${LOCALBASE} X11BASE=${X11BASE} MOTIFLIB="${MOTIFLIB}" CFLAGS="${CFLAGS}" LIBDIR="${LIBDIR}"
.if exists(/usr/bin/fetch)
FETCH_CMD?= /usr/bin/fetch
@@ -507,7 +624,7 @@
COMMENT?= ${PKGDIR}/COMMENT
DESCR?= ${PKGDIR}/DESCR
PLIST?= ${PKGDIR}/PLIST
-TMPPLIST?= ${WRKDIR}/PLIST.mktmp
+TMPPLIST?= ${WRKDIR}/.PLIST.mktmp
PKG_CMD?= /usr/sbin/pkg_create
.if !defined(PKG_ARGS)
@@ -767,7 +884,7 @@
__MANPAGES:= ${_MANPAGES:S^${PREFIX}/^^:S/""//:S^//^/^g:S/$/.gz/}
.endif
-.if defined(_MANPAGES) && defined(MANCOMPRESSED)
+.if defined(_MANPAGES) && ${MANCOMPRESSED} == "yes"
_MANPAGES:= ${_MANPAGES:S/$/.gz/}
.endif
@@ -1121,7 +1238,7 @@
.if !target(do-package)
do-package:
- @if [ -e ${PLIST} ]; then \
+ @if [ -e ${TMPPLIST} ]; then \
${ECHO_MSG} "===> Building package for ${PKGNAME}"; \
if [ -d ${PACKAGES} ]; then \
if [ ! -d ${PKGREPOSITORY} ]; then \
@@ -1229,36 +1346,23 @@
fi
.endif
.endif
-.if (make(real-install) || make(real-package)) && exists(${PLIST})
- @>${TMPPLIST}
-.for man in ${__MANPAGES}
- @${ECHO} ${man} >> ${TMPPLIST}
-.endfor
- @${SED} ${_sedsubplist} ${PLIST} >> ${TMPPLIST}
-.endif
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} ${.TARGET:S/^real-/pre-/}
@if [ -f ${SCRIPTDIR}/${.TARGET:S/^real-/pre-/} ]; then \
cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \
${SCRIPTDIR}/${.TARGET:S/^real-/pre-/}; \
fi
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} ${.TARGET:S/^real-/do-/}
+# put here so ports can change the contents of ${TMPPLIST} if necessary
+.if make(real-install)
+ @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} generate-plist
+.endif
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} ${.TARGET:S/^real-/post-/}
@if [ -f ${SCRIPTDIR}/${.TARGET:S/^real-/post-/} ]; then \
cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \
${SCRIPTDIR}/${.TARGET:S/^real-/post-/}; \
fi
.if make(real-install) && defined(_MANPAGES)
-.if defined(MANCOMPRESSED) && defined(NOMANCOMPRESS)
- @${ECHO_MSG} "===> Uncompressing manual pages for ${PKGNAME}"
-.for manpage in ${_MANPAGES}
- @${GUNZIP_CMD} ${manpage}
-.endfor
-.elif !defined(MANCOMPRESSED) && !defined(NOMANCOMPRESS)
- @${ECHO_MSG} "===> Compressing manual pages for ${PKGNAME}"
-.for manpage in ${_MANPAGES}
- @${GZIP_CMD} ${manpage}
-.endfor
-.endif
+ @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} compress-man
.endif
.if make(real-install) && !defined(NO_PKG_REGISTER)
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} fake-pkg
@@ -1536,7 +1640,7 @@
if [ -d $$dir ]; then \
(cd $$dir ; ${MAKE} package-name package-depends); \
else \
- ${ECHO_MSG} "Warning: \"$$dir\" non-existent -- @pkgdep registration incomplete" >&2; \
+ ${ECHO_MSG} "${PKGNAME}: \"$$dir\" non-existent -- dependency list incomplete" >&2; \
fi; \
done
.endif
@@ -1706,7 +1810,11 @@
.if !target(depends-list)
depends-list:
@for dir in `${ECHO} "${FETCH_DEPENDS} ${BUILD_DEPENDS} ${LIB_DEPENDS}" | ${TR} '\040' '\012' | ${SED} -e 's/^[^:]*://' -e 's/:.*//' | sort -u` `${ECHO} ${DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/:.*//' | sort -u`; do \
- (cd $$dir; ${MAKE} package-name depends-list); \
+ if [ -d $$dir ]; then \
+ (cd $$dir ; ${MAKE} package-name depends-list); \
+ else \
+ ${ECHO_MSG} "${PKGNAME}: \"$$dir\" non-existent -- dependency list incomplete" >&2; \
+ fi; \
done
.endif
@@ -1788,13 +1896,41 @@
.endif
.endif
+# Generate packing list. Also tests to make sure all required package
+# files exist.
+
+.if !target(generate-plist)
+generate-plist:
+ @if [ ! -f ${PLIST} -o ! -f ${COMMENT} -o ! -f ${DESCR} ]; then ${ECHO} "** Missing package files for ${PKGNAME}."; exit 1; fi
+ @>${TMPPLIST}
+.for man in ${__MANPAGES}
+ @${ECHO} ${man} >> ${TMPPLIST}
+.endfor
+ @${SED} ${_sedsubplist} ${PLIST} >> ${TMPPLIST}
+.endif
+
+# Compress (or uncompress) manpages.
+.if !target(compress-man)
+compress-man:
+.if ${MANCOMPRESSED} == yes && defined(NOMANCOMPRESS)
+ @${ECHO_MSG} "===> Uncompressing manual pages for ${PKGNAME}"
+.for manpage in ${_MANPAGES}
+ @${GUNZIP_CMD} ${manpage}
+.endfor
+.elif ${MANCOMPRESSED} == no && !defined(NOMANCOMPRESS)
+ @${ECHO_MSG} "===> Compressing manual pages for ${PKGNAME}"
+.for manpage in ${_MANPAGES}
+ @${GZIP_CMD} ${manpage}
+.endfor
+.endif
+.endif
+
# Fake installation of package so that user can pkg_delete it later.
# Also, make sure that an installed port is recognized correctly in
# accordance to the @pkgdep directive in the packing lists
.if !target(fake-pkg)
fake-pkg:
- @if [ ! -f ${TMPPLIST} -o ! -f ${COMMENT} -o ! -f ${DESCR} ]; then ${ECHO} "** Missing package files for ${PKGNAME} - installation not recorded."; exit 1; fi
@if [ ! -d ${PKG_DBDIR} ]; then ${RM} -f ${PKG_DBDIR}; ${MKDIR} ${PKG_DBDIR}; fi
.if defined(FORCE_PKG_REGISTER)
@${RM} -rf ${PKG_DBDIR}/${PKGNAME}
Index: bsd.port.subdir.mk
===================================================================
RCS file: /home/ncvs/src/share/mk/bsd.port.subdir.mk,v
retrieving revision 1.15.2.3
diff -u -r1.15.2.3 bsd.port.subdir.mk
--- bsd.port.subdir.mk 1997/11/20 05:36:46 1.15.2.3
+++ bsd.port.subdir.mk 1998/08/13 01:52:04
@@ -28,7 +28,7 @@
# Creating README.html for package.
#
# afterinstall, all, beforeinstall, build, checksum, clean,
-# configure, depend, describe, extract, fetch, fetch-list,
+# configure, deinstall, depend, describe, extract, fetch, fetch-list,
# install, package, readmes, realinstall, reinstall, tags
#
@@ -79,7 +79,8 @@
${MAKE} all
.for __target in all fetch fetch-list package extract configure \
- build clean depend describe distclean reinstall tags checksum
+ build clean deinstall depend describe distclean \
+ reinstall tags checksum
.if !target(${__target})
${__target}: _SUBDIRUSE
.endif
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-ports" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199808240608.XAA02385>