Date: Wed, 29 Jul 1998 08:03:24 -0500 (CDT) From: Eric Patterson <ericp@ro.com> To: Doug White <dwhite@resnet.uoregon.edu> Cc: freebsd-questions@FreeBSD.ORG Subject: Re: cam and ASUS P2B-S Message-ID: <Pine.LNX.3.96.980729065605.6585A-100000@sh1.ro.com> In-Reply-To: <Pine.BSF.4.00.9807281313130.21490-100000@resnet.uoregon.edu>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, 28 Jul 1998, Doug White wrote: > On Mon, 27 Jul 1998, Eric Patterson wrote: > > > I have gotten FreeBSD installed on this machine. Everything works fine > > until I attach an external SCSI device to the on board AIC 7890. When I > > do this, It begins to boot fine, but then just before it completes the > > boot, I get the following error. > > > > panic: ahc0: brkadrint, Data-path Parity Error at seqaddr = 0x17e > > The 7890 shouldn't be supported yet ... you need the CAM patches. Odd > that it would detect it okay though ... Oops. I didn't make that clear in my original message. I was using a CAMified boot floppy. I have made every effort to ensure that the termination is set properly. I am only using two ports on the controller, i.e. one 68 pin internal and the external port. Could this be a problem with the CAM drivers? Or is this classic operator error? Probably the latter, but as best I can tell, and I am no expert, it seems to be a problem with CAM. If so, I'd be happy to provide more details if it would be helpful to the CAM folks. Has anyone else had similar problems? I have installed the Adaptec 2940UW on the same machine with the same external and internal SCSI devices and everything works great. It's not urgent, but the curious side of me wants to get the 7890 working anyway. Later, Eric Patterson To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.3.96.980729065605.6585A-100000>