Date: Thu, 22 Oct 1998 21:26:12 -0700 From: Shawn Ramsey <shawn@cpl.net> To: "Jason C. Wells" <jcwells@u.washington.edu> Cc: questions@FreeBSD.ORG Subject: Re: drive question Message-ID: <19981022212612.27119@cpl.net> In-Reply-To: <Pine.BSF.4.05.9810221936430.6028-100000@s8-37-26.student.washington.edu>; from Jason C. Wells on Thu, Oct 22, 1998 at 07:41:36PM -0700 References: <19981022181805.48149@cpl.net> <Pine.BSF.4.05.9810221936430.6028-100000@s8-37-26.student.washington.edu>
next in thread | previous in thread | raw e-mail | index | archive | help
> >Filesystem 1K-blocks Used Avail Capacity Mounted on > >/dev/wd0s1a 456599 203690 216382 48% / > >/dev/wd2s1e 1212223 1090594 24652 98% /disk2 > >/dev/sd0s1e 492273 183575 269317 41% /disk3 > >/dev/wd1s1e 2000831 1387310 453455 75% /disk4 > >procfs 4 4 0 100% /proc > >/dev/wd3s1e 3795566 1184598 2307323 34% /disk5 > Now, if you physically swap the location of the drives on your IDE ports > then you need to change the device names. This is just as trivial as > changing the mounting locations. > > >/dev/wd3s1e 2000831 1387310 453455 75% /disk4 > >/dev/wd1s1e 3795566 1184598 2307323 34% /disk5 What I meant, is I want to replace /dev/wd1s1e, the drive mounted as /disk4 with the drive mounted as /disk5. The disk mounted as /disk4 is going to be no more, as it is having problems. It is the secondary master drive, and the only device on that interface. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19981022212612.27119>