Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 20 Nov 1999 20:05:58 -0500
From:      "Jason Craig" <nemesys@home.com>
To:        "Matthew N. Dodd" <winter@jurai.net>
Cc:        "FreeBSD Hackers" <freebsd-hackers@FreeBSD.ORG>
Subject:   Re: Compile new kernel with MCA support
Message-ID:  <006801bf33bc$92248b80$d3b17018@wlfdle1.on.wave.home.com>
References:  <Pine.BSF.4.20.9911201608390.7305-100000@sasami.jurai.net>

next in thread | previous in thread | raw e-mail | index | archive | help
It worked like a charm.

I've commented out the SMP portion of the kernel config, and inserted the
controller mca0 like you said.

I was actually going to try this when I created the kernel config file to
begin with.  But didn't bother.  Guess I should have went with my instinct.

Thanks,

Jason


----- Original Message -----
From: Matthew N. Dodd <winter@jurai.net>
To: Jason Craig <nemesys@home.com>
Cc: FreeBSD Hackers <freebsd-hackers@FreeBSD.ORG>
Sent: Saturday, November 20, 1999 4:12 PM
Subject: Re: Compile new kernel with MCA support


> On Sat, 20 Nov 1999, Jason Craig wrote:
> > Here's what I see when I boot with the kernel I compiled a few days ago:
>
> Humm...
>
> I see where the problem is.
>
> I'd like you to compile a kernel without SMP support but with MCA support.
>
> Add:
>
> controller      mca0
>
> I'm working on the SMP angle.
>
> > Copyright (c) 1982, 1986, 1989, 1991, 1993
> >         The Regents of the University of California. All rights
reserved.
> > FreeBSD 4.0-19991113-CURRENT #0: Fri Nov 19 08:00:49 GMT 1999
> >
> >
root@cr717730-d.wlfdle1.on.wave.home.com:/usr/src/sys/compile/KERNEL.1119199
> > 9
> > Timecounter "i8254"  frequency 1193182 Hz
> > CPU: Pentium/P54C (89.96-MHz 586-class CPU)
> >   Origin = "GenuineIntel"  Id = 0x525  Stepping = 5
> >   Features=0x3bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,APIC>
> > real memory  = 67108864 (65536K bytes)
> > avail memory = 62033920 (60580K bytes)
> > panic: unknown bus type: 'MCA'
> > mp_lock = 00000004; cpuid = 0; lapic.id = 00000000
> >
> > Boom...  Locked up.
> >
> > When I created the custom kernel config for this machine I did removed
> > devices that were not present in my system (as usual), and enabled SMP.
> >
> > # To make an SMP kernel, the next two are needed
> > options        SMP                     # Symmetric MultiProcessor Kernel
> > options        APIC_IO                 # Symmetric (APIC) I/O
> > # Optionally these may need tweaked, (defaults shown):
> > options        NCPU=2                  # number of CPUs
> > #options        NBUS=4                  # number of busses
> > #options        NAPIC=1                 # number of IO APICs
> > #options        NINTR=24                # number of INTs
> >
> > A little lower I noticed that there were no entries for MCA, should
there be
> > one?
> >
> > controller      isa0
> > controller      pnp0                    # PnP support for ISA
> > controller      eisa0
> > controller      pci0
> >
> > Thans in advance,
> >
> > Jason
> >
> >
> >
> >
> > ----- Original Message -----
> > From: Matthew N. Dodd <winter@jurai.net>
> > To: Jason Craig <freebsd@b0rg.net>
> > Cc: <freebsd-hackers@FreeBSD.ORG>
> > Sent: Friday, November 19, 1999 8:56 PM
> > Subject: Re: Compile new kernel with MCA support
> >
> >
> > > On Fri, 19 Nov 1999, Jason Craig wrote:
> > > > I have a few FreeBSD machines that I am playing around with now, and
> > > > have come across a nice old IBM PC Server 320 with dual P90
processors
> > > > and 64MB of RAM i would also like to utilize.
> > > >
> > > > I am currently using 4.0-19991113-CURRENT generic kernel, and things
are
> > > > working great.
> > > >
> > > > However, I tried to compile a custom kernel to weed out any unwanted
> > > > devices, and to enable SMP and have have run into a problem.  After
> > > > compiling the kernel using the standard procedure, I rebooted it,
and
> > > > it panic'd after doing the kernel config.
> > > >
> > > > I tried removing most of the entries from /boot/kernel.conf, only to
> > > > find it still panics saying something about the MCA bus.
> > >
> > > Using the serial console, capture the boot messages and attach them to
the
> > > reply to this message.
> > >
> > > --
> > > | Matthew N. Dodd  | '78 Datsun 280Z | '75 Volvo 164E | FreeBSD/NetBSD
|
> > > | winter@jurai.net |       2 x '84 Volvo 245DL        |
ix86,sparc,pmax |
> > > | http://www.jurai.net/~winter | This Space For Rent  | ISO8802.5
4ever |
> > >
> > >
> > >
> > > To Unsubscribe: send mail to majordomo@FreeBSD.org
> > > with "unsubscribe freebsd-hackers" in the body of the message
> > >
> >
>
> --
> | Matthew N. Dodd  | '78 Datsun 280Z | '75 Volvo 164E | FreeBSD/NetBSD  |
> | winter@jurai.net |       2 x '84 Volvo 245DL        | ix86,sparc,pmax |
> | http://www.jurai.net/~winter | This Space For Rent  | ISO8802.5 4ever |
>



To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hackers" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?006801bf33bc$92248b80$d3b17018>