Date: Sun, 23 Dec 2001 19:46:20 +0100 From: "Petr Holub" <hopet@ics.muni.cz> To: "Semen A. Ustimenko" <semenu@FreeBSD.org> Cc: <freebsd-hackers@FreeBSD.org> Subject: RE: tx driver Message-ID: <001a01c18be2$1cfbd360$2603fb93@kloboucek> In-Reply-To: <Pine.BSF.4.21.0112212251370.36511-100000@def.the.net>
next in thread | previous in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
------=_NextPart_000_001B_01C18BEA.7EC03B60
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
Hi!
> 1) ``pciconf -l'' and ``ifconfig tx0'' output, please
Both are attached.
> 2) Could you upgrade to 4.4 or later? There were few changes.
> Particullary, the true AC101 PHY support. You may try to fetch miibus.ko
> and if_tx.ko binaries from 4.4 system, if you don't want to upgrade whole
> system. I hope it will work.
I'll try this and the rest of your suggestions probably on
Dec. 28 since I suffer from lack of time during Xmas :-( Sorry.
I'll give you the mail when I do that.
Petr
================================================================
Petr Holub
CESNET z.s.p.o. Supercomputing Center Brno
Zikova 2 Institute of Compt. Science
10200 Praha, CZ Masaryk University
Czech Republic Botanicka 68a, 60200 Brno, CZ
e-mail: Petr.Holub@cesnet.cz phone: +420-5-41512278
e-mail: hopet@ics.muni.cz
------=_NextPart_000_001B_01C18BEA.7EC03B60
Content-Type: text/plain;
name="ifconfig.txt"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
filename="ifconfig.txt"
tx0: flags=3D8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500=0A=
inet 147.251.3.44 netmask 0xffffff00 broadcast 147.251.3.255=0A=
inet6 fe80::2e0:29ff:fe8e:7519%tx0 prefixlen 64 scopeid 0x1 =0A=
ether 00:e0:29:8e:75:19 =0A=
media: autoselect (100baseTX <full-duplex>) status: active=0A=
supported media: autoselect 100baseTX <full-duplex> 100baseTX =
10baseT/UTP <full-duplex> 10baseT/UTP 100baseTX <hw-loopback>=0A=
------=_NextPart_000_001B_01C18BEA.7EC03B60
Content-Type: text/plain;
name="pciconf.txt"
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
filename="pciconf.txt"
agp0@pci0:0:0: class=3D0x060000 card=3D0x00000000 chip=3D0x30991106 =
rev=3D0x00 hdr=3D0x00=0A=
pcib1@pci0:1:0: class=3D0x060400 card=3D0x00000080 chip=3D0xb0991106 =
rev=3D0x00 hdr=3D0x01=0A=
tx0@pci0:6:0: class=3D0x020000 card=3D0xa02010b8 chip=3D0x000510b8 =
rev=3D0x09 hdr=3D0x00=0A=
none0@pci0:7:0: class=3D0x040000 card=3D0x035013ec chip=3D0x612011de =
rev=3D0x03 hdr=3D0x00=0A=
bktr0@pci0:8:0: class=3D0x040000 card=3D0x00031461 chip=3D0x036e109e =
rev=3D0x02 hdr=3D0x00=0A=
none1@pci0:8:1: class=3D0x048000 card=3D0x00031461 chip=3D0x0878109e =
rev=3D0x02 hdr=3D0x00=0A=
pcm0@pci0:9:0: class=3D0x040100 card=3D0x80271102 chip=3D0x00021102 =
rev=3D0x08 hdr=3D0x00=0A=
emujoy0@pci0:9:1: class=3D0x098000 card=3D0x00201102 chip=3D0x70021102 =
rev=3D0x08 hdr=3D0x00=0A=
isab0@pci0:17:0: class=3D0x060100 card=3D0x30741106 chip=3D0x30741106 =
rev=3D0x00 hdr=3D0x00=0A=
atapci0@pci0:17:1: class=3D0x01018a card=3D0x05711106 chip=3D0x05711106 =
rev=3D0x06 hdr=3D0x00=0A=
uhci0@pci0:17:2: class=3D0x0c0300 card=3D0x12340925 chip=3D0x30381106 =
rev=3D0x18 hdr=3D0x00=0A=
uhci1@pci0:17:3: class=3D0x0c0300 card=3D0x12340925 chip=3D0x30381106 =
rev=3D0x18 hdr=3D0x00=0A=
uhci2@pci0:17:4: class=3D0x0c0300 card=3D0x12340925 chip=3D0x30381106 =
rev=3D0x18 hdr=3D0x00=0A=
none2@pci1:0:0: class=3D0x030000 card=3D0x0641102b chip=3D0x0525102b =
rev=3D0x82 hdr=3D0x00=0A=
------=_NextPart_000_001B_01C18BEA.7EC03B60--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hackers" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?001a01c18be2$1cfbd360$2603fb93>