Date: Sun, 11 Aug 2002 14:09:32 +0200 From: "Vaclav Musil" <musil@kn.vutbr.cz> To: <freebsd-smp@FreeBSD.ORG> Subject: Re: 4.6 SMP won't boot correctly on Dual Xeon/Intel SE7500CW system board Message-ID: <001001c2412f$f4130230$0a64e593@p2204a> References: <Pine.GSO.4.21.0208102113050.16292-100000@speedy>
next in thread | previous in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. ------=_NextPart_000_000D_01C24140.B7557A60 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Hi, I have exactly the same problem, full information about this board are here: http://www.intel.com/support/motherboards/server/SE7500CW2/ I tested it on two pieces of this server with the same result. 5.0-DP1 also doesn't working. In attachment are full dmesg and mptable outputs. Regards, Vaclav Musil, musil@kn.vutbr.cz sprava site KolejNet, KaMB VUT v Brne ----- Original Message ----- From: "James Schmidt" <james@JamesSchmidt.Com> To: <freebsd-questions@FreeBSD.ORG>; <freebsd-smp@FreeBSD.ORG> Sent: Sunday, August 11, 2002 4:24 AM Subject: 4.6 SMP won't boot correctly on Dual Xeon/Intel SE7500CW system board > > Hello, > > I am upgrading a FreeBSD 4.6 server from a dual-Pentium-II system to a > dual 2.0GHz XEON system, running on an Intel SE7500CW2 motherboard. > > When I attempt to boot the system, the boot process halts at the following > point: > > Programming 24 pins in IOAPIC #0 > IOAPIC #0 intpin 2 -> irq #0 > Programming 24 pins in IOAPIC #1 > Programming 24 pins in IOAPIC #2 > AP #1 (PHY# 6) failed! > panic y/n? [y] > > If I hit N, the system continues to boot normally, but without SMP > support. I've read just about every SMP FAQ I can find concerning > FreeBSD, and I have tried recompiling the kernel with different > configuration values, but I get the same result. > > Just to eliminate the possibility of faulty hardware, I've also installed > Windows XP Pro and RedHat 7.3; both installations went fine and the system > runs great. > > If anyone can help, it would be greatly appreciated. > Regards, > James Schmidt > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-smp" in the body of the message > ------=_NextPart_000_000D_01C24140.B7557A60 Content-Type: text/plain; name="dmesg.txt" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="dmesg.txt" Copyright (c) 1992-2002 The FreeBSD Project.=0A= Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994=0A= The Regents of the University of California. All rights reserved.=0A= FreeBSD 4.6.1-RELEASE-p7 #2: Sat Aug 10 14:52:01 GMT 2002=0A= root@intel.kn.vutbr.cz:/usr/obj/usr/src/sys/INTEL01=0A= Timecounter "i8254" frequency 1193182 Hz=0A= CPU: Pentium 4 (1993.54-MHz 686-class CPU)=0A= Origin =3D "GenuineIntel" Id =3D 0xf24 Stepping =3D 4=0A= = Features=3D0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG= E,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,<b28>,ACC>=0A= real memory =3D 1073217536 (1048064K bytes)=0A= avail memory =3D 1039953920 (1015580K bytes)=0A= Programming 24 pins in IOAPIC #0=0A= IOAPIC #0 intpin 2 -> irq 0=0A= Programming 24 pins in IOAPIC #1=0A= Programming 24 pins in IOAPIC #2=0A= AP #1 (PHY# 6) failed!=0A= panic y/n? [y] FreeBSD/SMP: Multiprocessor motherboard=0A= cpu0 (BSP): apic id: 0, version: 0x00050014, at 0xfee00000=0A= cpu1 (AP): apic id: 6, version: 0x00000000, at 0xfee00000=0A= io0 (APIC): apic id: 2, version: 0x00178020, at 0xfec00000=0A= io1 (APIC): apic id: 3, version: 0x00178020, at 0xfec80000=0A= io2 (APIC): apic id: 4, version: 0x00178020, at 0xfec80400=0A= Preloaded elf kernel "kernel" at 0xc0479000.=0A= md0: Malloc disk=0A= Using $PIR table, 17 entries at 0xc00fdeb0=0A= npx0: <math processor> on motherboard=0A= npx0: INT 16 interface=0A= pcib0: <Host to PCI bridge> on motherboard=0A= IOAPIC #0 intpin 16 -> irq 2=0A= IOAPIC #0 intpin 19 -> irq 5=0A= IOAPIC #0 intpin 17 -> irq 10=0A= pci0: <PCI bus> on pcib0=0A= pci0: <unknown card> (vendor=3D0x8086, dev=3D0x2541) at 0.1=0A= pcib1: <PCI to PCI bridge (vendor=3D8086 device=3D2543)> at device 2.0 = on pci0=0A= pci1: <PCI bus> on pcib1=0A= pci1: <unknown card> (vendor=3D0x8086, dev=3D0x1461) at 28.0=0A= pcib2: <PCI to PCI bridge (vendor=3D8086 device=3D1460)> at device 29.0 = on pci1=0A= IOAPIC #1 intpin 0 -> irq 11=0A= pci2: <PCI bus> on pcib2=0A= pcib3: <PCI to PCI bridge (vendor=3D1044 device=3Da500)> at device 1.0 = on pci2=0A= pci3: <PCI bus> on pcib3=0A= asr0: <Adaptec Caching SCSI RAID> mem 0xf0000000-0xf7ffffff irq 11 at = device 1.1 on pci2=0A= asr0: major=3D154=0A= asr0: ADAPTEC 3210S FW Rev. 370F, 2 channel, 256 CCBs, Protocol I2O=0A= pci1: <unknown card> (vendor=3D0x8086, dev=3D0x1461) at 30.0=0A= pcib4: <PCI to PCI bridge (vendor=3D8086 device=3D1460)> at device 31.0 = on pci1=0A= pci4: <PCI bus> on pcib4=0A= em0: <Intel(R) PRO/1000 Network Connection, Version - 1.2.7> port = 0x7000-0x701f mem 0xe8200000-0xe821ffff,0xe8220000-0xe823ffff irq 11 at = device 1.0 on pci4=0A= em0: Speed:N/A Duplex:N/A=0A= pci0: <UHCI USB controller> at 29.0 irq 2=0A= pci0: <UHCI USB controller> at 29.1 irq 5=0A= pcib5: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on = pci0=0A= IOAPIC #0 intpin 21 -> irq 16=0A= IOAPIC #0 intpin 20 -> irq 17=0A= IOAPIC #0 intpin 23 -> irq 18=0A= pci5: <PCI bus> on pcib5=0A= pci5: <ATI Mach64-GR graphics accelerator> at 3.0 irq 16=0A= fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x8400-0x843f mem = 0xe8300000-0xe831ffff,0xe8341000-0xe8341fff irq 17 at device 4.0 on pci5=0A= fxp0: Ethernet address 00:02:b3:b0:bf:f4=0A= inphy0: <i82555 10/100 media interface> on miibus0=0A= inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto=0A= fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0x8440-0x847f mem = 0xe8320000-0xe833ffff,0xe8342000-0xe8342fff irq 18 at device 5.0 on pci5=0A= fxp1: Ethernet address 00:02:b3:b0:c1:00=0A= inphy1: <i82555 10/100 media interface> on miibus1=0A= inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto=0A= isab0: <PCI to ISA bridge (vendor=3D8086 device=3D2480)> at device 31.0 = on pci0=0A= isa0: <ISA bus> on isab0=0A= atapci0: <Intel ICH3 ATA100 controller> port = 0x6c60-0x6c6f,0-0x3,0-0x7,0-0x3,0-0x7 irq 0 at device 31.1 on pci0=0A= ata0: at 0x1f0 irq 14 on atapci0=0A= ata1: at 0x170 irq 15 on atapci0=0A= pci0: <unknown card> (vendor=3D0x8086, dev=3D0x2483) at 31.3 irq 10=0A= orm0: <Option ROMs> at iomem = 0xc0000-0xc7fff,0xc8000-0xcdfff,0xe3800-0xe3fff on isa0=0A= fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0=0A= fdc0: FIFO enabled, 8 bytes threshold=0A= fd0: <1440-KB 3.5" drive> on fdc0 drive 0=0A= atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0=0A= atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0=0A= kbd0 at atkbd0=0A= vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0=0A= sc0: <System console> at flags 0x100 on isa0=0A= sc0: VGA <16 virtual consoles, flags=3D0x300>=0A= sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0=0A= sio0: type 16550A=0A= sio1 at port 0x2f8-0x2ff irq 3 on isa0=0A= sio1: type 16550A=0A= ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0=0A= ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode=0A= ppc0: FIFO with 16/16/9 bytes threshold=0A= plip0: <PLIP network interface> on ppbus0=0A= lpt0: <Printer> on ppbus0=0A= lpt0: Interrupt-driven port=0A= ppi0: <Parallel I/O> on ppbus0=0A= APIC_IO: Testing 8254 interrupt delivery=0A= APIC_IO: routing 8254 via IOAPIC #0 intpin 2=0A= acd0: CDROM <SONY CD-ROM CDU5221> at ata0-master PIO4=0A= pass1 at asr0 bus 0 target 6 lun 0=0A= pass1: <ESG-SHV SCA HSBP M15 0.08> Fixed Processor SCSI-2 device =0A= da0 at asr0 bus 0 target 0 lun 0=0A= da0: <ADAPTEC RAID-1 370F> Fixed Direct Access SCSI-2 device =0A= da0: Tagged Queueing Enabled=0A= da0: 17522MB (35885056 512 byte sectors: 255H 63S/T 2233C)=0A= Mounting root from ufs:/dev/da0s1a=0A= ------=_NextPart_000_000D_01C24140.B7557A60 Content-Type: text/plain; name="mptable.txt" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="mptable.txt" =0A= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=0A= =0A= MPTable, version 2.0.15=0A= =0A= -------------------------------------------------------------------------= ------=0A= =0A= MP Floating Pointer Structure:=0A= =0A= location: BIOS=0A= physical address: 0x000f6670=0A= signature: '_MP_'=0A= length: 16 bytes=0A= version: 1.4=0A= checksum: 0x68=0A= mode: Virtual Wire=0A= =0A= -------------------------------------------------------------------------= ------=0A= =0A= MP Config Table Header:=0A= =0A= physical address: 0x0009bf70=0A= signature: 'PCMP'=0A= base table length: 340=0A= version: 1.4=0A= checksum: 0x68=0A= OEM ID: ' '=0A= Product ID: 'SE7500CW2'=0A= OEM table pointer: 0x00000000=0A= OEM table size: 0=0A= entry count: 34=0A= local APIC address: 0xfee00000=0A= extended table length: 184=0A= extended table checksum: 76=0A= =0A= -------------------------------------------------------------------------= ------=0A= =0A= MP Config Base Table Entries:=0A= =0A= --=0A= Processors: APIC ID Version State Family Model Step Flags=0A= 0 0x14 BSP, usable 15 2 4 0x3febfbff=0A= 6 0x14 AP, usable 15 2 4 0x3febfbff=0A= --=0A= Bus: Bus ID Type=0A= 0 PCI =0A= 1 PCI =0A= 2 PCI =0A= 3 PCI =0A= 4 PCI =0A= 5 PCI =0A= 6 ISA =0A= --=0A= I/O APICs: APIC ID Version State Address=0A= 2 0x20 usable 0xfec00000=0A= 3 0x20 usable 0xfec80000=0A= 4 0x20 usable 0xfec80400=0A= --=0A= I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#=0A= ExtINT active-hi edge 6 0 2 0=0A= INT active-hi edge 6 1 2 1=0A= INT active-hi edge 6 0 2 2=0A= INT active-hi edge 6 3 2 3=0A= INT active-hi edge 6 4 2 4=0A= INT active-lo level 0 29:B 2 19=0A= INT active-hi edge 6 6 2 6=0A= INT active-hi edge 6 7 2 7=0A= INT active-hi edge 6 8 2 8=0A= INT active-hi edge 6 9 2 9=0A= INT active-lo level 0 29:A 2 16=0A= INT active-lo level 0 31:B 2 17=0A= INT active-hi edge 6 12 2 12=0A= INT active-hi edge 6 13 2 13=0A= INT active-hi edge 6 14 2 14=0A= INT active-hi edge 6 15 2 15=0A= INT active-lo level 2 1:A 3 0=0A= INT active-lo level 5 3:A 2 21=0A= INT active-lo level 5 4:A 2 20=0A= INT active-lo level 5 5:A 2 23=0A= --=0A= Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#=0A= ExtINT active-hi edge 6 0 255 0=0A= NMI active-hi edge 6 0 255 1=0A= =0A= -------------------------------------------------------------------------= ------=0A= =0A= MP Config Extended Table Entries:=0A= =0A= --=0A= System Address Space=0A= bus ID: 0 address type: I/O address=0A= address base: 0x0=0A= address range: 0x10000=0A= --=0A= System Address Space=0A= bus ID: 0 address type: memory address=0A= address base: 0x40000000=0A= address range: 0xb0000000=0A= --=0A= System Address Space=0A= bus ID: 0 address type: prefetch address=0A= address base: 0xf0000000=0A= address range: 0x8000000=0A= --=0A= System Address Space=0A= bus ID: 0 address type: memory address=0A= address base: 0xf8000000=0A= address range: 0x6e00000=0A= --=0A= System Address Space=0A= bus ID: 0 address type: memory address=0A= address base: 0xfee01000=0A= address range: 0x11ff000=0A= --=0A= System Address Space=0A= bus ID: 5 address type: memory address=0A= address base: 0xa0000=0A= address range: 0x20000=0A= --=0A= System Address Space=0A= bus ID: 4 address type: memory address=0A= address base: 0xd0000=0A= address range: 0x14000=0A= --=0A= System Address Space=0A= bus ID: 0 address type: memory address=0A= address base: 0x3ff80000=0A= address range: 0x80000=0A= --=0A= Bus Heirarchy=0A= bus ID: 6 bus info: 0x01 parent bus ID: 0=0A= --=0A= Compatibility Bus Address=0A= bus ID: 0 address modifier: add=0A= predefined range: 0x00000000=0A= --=0A= Compatibility Bus Address=0A= bus ID: 0 address modifier: add=0A= predefined range: 0x00000001=0A= =0A= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=0A= =0A= ------=_NextPart_000_000D_01C24140.B7557A60-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-smp" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?001001c2412f$f4130230$0a64e593>