Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 13 Nov 2002 10:38:40 +0900
From:      Hidetoshi Shimokawa <simokawa@sat.t.u-tokyo.ac.jp>
To:        Buzz Slye <buzz@gaia.arc.nasa.gov>
Cc:        freebsd-firewire@freebsd.org
Subject:   Re: Howto send inquiry orb
Message-ID:  <ybsd6pafdun.wl@ett.sat.t.u-tokyo.ac.jp>
In-Reply-To: <Pine.GSO.4.44.0211121359250.1154-200000@mono.arc.nasa.gov>
References:  <Pine.GSO.4.44.0211121359250.1154-200000@mono.arc.nasa.gov>

next in thread | previous in thread | raw e-mail | index | archive | help
At Tue, 12 Nov 2002 14:01:54 -0800 (PST),
Buzz Slye wrote:
> 
> [1  <text/plain; US-ASCII (7bit)>]
> Hi,
> 
> I am trying to run a Kodak camera from the firewire with the attached program.

I'm not sure what a Kodak camera look like. Is it a SBP-II device?
If it's so, you don't need to reimplement SBP-II.

> (I am currently debugging the packet sending using an Oxford disk).
> The attached progam is attempting to send a command orb inquiry to the
> device.
> 
> da4 at sbp0 bus 0 target 0 lun 0
> da4: <Oxford S (null) 0000> Fixed Simplified Direct Access SCSI-4 device
> sbp0:0:0 XPT_GET_TRAN_SETTINGS:.
> sbp0:0:0 XPT_PATH_INQ:.
> da4: 50.000MB/s transfers
> da4: 28615MB (58605120 512 byte sectors: 255H 63S/T 3648C)
> 
> After the login, running the program, the response I get is:
> 
> fw_rcv: unknown response tcode=2 src=0xffc1 tl=20 rt=1 data=0x84516ce3
> try ad-hoc work around!!
> no use...
> 
> Apparently, the response destination does not agree with the original source.
> 
> Questions.
> 
>     What to use for ---.mode.wreqb.src ?
> 
>     What about dest_lo ?
> 
>     Is wreqb the correct mode ?
> 
>     Where does the response go ?

What is a orb inquiry?
Is it SBP-II's ORB?

SBP-II's ORB is not written by the host but fetched by the device(e.g. HDD).

/\ Hidetoshi Shimokawa
\/  simokawa@sat.t.u-tokyo.ac.jp
PGP public key: http://www.sat.t.u-tokyo.ac.jp/~simokawa/pgp.html

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-firewire" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?ybsd6pafdun.wl>