Date: Fri, 21 Jul 2000 03:39:38 -0400 From: "Nader Turki" <nturki@adelphia.net> To: "Matthew Enger" <menger@outblaze.com>, <freebsd-stable@FreeBSD.ORG> Subject: Re: Booting up pauses Message-ID: <004001bff2e6$d3285960$1b9b3218@pit.adelphia.net> References: <Pine.LNX.4.21.0007211532330.1749-100000@menger.portal2.com>
next in thread | previous in thread | raw e-mail | index | archive | help
I had the Same problem with a machine that had a FIC SD11 Motherboard. I just replaced the board with AOpen AK72 yesterday and it's working fine now! ----- Original Message ----- From: Matthew Enger <menger@outblaze.com> To: <freebsd-stable@FreeBSD.ORG> Sent: Friday, July 21, 2000 3:37 AM Subject: Booting up pauses > Hello, > I have setup a FreeBSD 4.1-RC box at the office here running on a > AOpen VIA board and have noticed that during the boot up the system pauses > for long periods and was wondering why. Below is dmesg file and I have > marked where it pauses. If anyone has any ideas, any help would be > appricated. > > from, > Matthew Enger > menger@outblaze.com > > > Copyright (c) 1992-2000 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 4.1-RC #2: Fri Jul 21 10:01:38 CST 2000 > root@newproxy.outblaze.com:/usr/src/sys/compile/PROXY > Timecounter "i8254" frequency 1193182 Hz > Timecounter "TSC" frequency 501139026 Hz > CPU: Pentium III/Pentium III Xeon/Celeron (501.14-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0x673 Stepping = 3 > > Features=0x387f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV, PAT,PSE36,PN,MMX,FXSR,XMM> > real memory = 268435456 (262144K bytes) > avail memory = 258158592 (252108K bytes) > Preloaded elf kernel "kernel" at 0xc02bf000. > Pentium Pro MTRR support enabled > md0: Malloc disk > npx0: <math processor> on motherboard > npx0: INT 16 interface > pcib0: <Host to PCI bridge> on motherboard > pci0: <PCI bus> on pcib0 > pcib2: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on > pci0 > pci1: <PCI bus> on pcib2 > pci1: <NVidia Riva Vanta TNT2 graphics accelerator> at 0.0 irq 11 > isab0: <VIA 82C596B PCI-ISA bridge> at device 7.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <VIA 82C596B ATA66 controller> port 0x6400-0x640f at device 7.1 on pci0 > > PAUSE FOR 30 SECONDS > > ata1: at 0x170 irq 15 on atapci0 > uhci0: <VIA 83C572 USB controller> port 0x6800-0x681f irq 10 at device 7.2 > on pci0 > usb0: <VIA 83C572 USB controller> on uhci0 > usb0: USB revision 1.0 > uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > uhub0: port 1 power on failed, IOERROR > uhub0: port 2 power on failed, IOERROR > fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x6c00-0x6c3f mem > 0xea000000-0xea0fffff,0xea102000-0xea102fff irq 10 at device 9.0 on pci0 > fxp0: Ethernet address 00:90:27:a4:e7:f1 > sym0: <875> port 0x7000-0x70ff mem > 0xea101000-0xea101fff,0xea100000-0xea1000ff irq 12 at device 10.0 on pci0 > sym0: Tekram NVRAM, ID 7, Fast-20, SE, parity checking > pcib1: <Host to PCI bridge> on motherboard > pci2: <PCI bus> on pcib1 > fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 > fdc0: FIFO enabled, 8 bytes threshold > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > > PAUSE > > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 > atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 > kbd0 at atkbd0 > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 16550A > sio1 at port 0x2f8-0x2ff irq 3 on isa0 > sio1: type 16550A > ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 > ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > acd0: CDROM <ASUS CD-S400/A> at ata1-master using PIO4 > Waiting 5 seconds for SCSI devices to settle > Mounting root from ufs:/dev/da0s1a > da0 at sym0 bus 0 target 0 lun 0 > da0: <SEAGATE ST39140W 1281> Fixed Direct Access SCSI-2 device > da0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled > da0: 8683MB (17783240 512 byte sectors: 255H 63S/T 1106C) > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-stable" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?004001bff2e6$d3285960$1b9b3218>