Date: Wed, 4 Dec 1996 21:24:37 -0800 (PST) From: Doug White <dwhite@gdi.uoregon.edu> To: Saekow Apitep <apitep@cs.latrobe.edu.au> Cc: questions@freebsd.org Subject: Re: Need your help, Sir. Message-ID: <Pine.BSI.3.94.961204212247.7328G-100000@gdi.uoregon.edu> In-Reply-To: <Pine.SUN.3.91.961130014136.24370A-100000@latcs1.cs.latrobe.edu.au>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sat, 30 Nov 1996, Saekow Apitep wrote: > > 1. Set an IRQ for this device in BIOS Setup. > Do you mean I have to press "del" to set up IRQ in BIOS? > If so, could you please tell me exactly how to set an IRQ for this > device in BIOS? Yes. However, not all BIOS setups have the ability to set IRQs for specific slots. The only one I know if is Phoenix BIOS v4.0x (the one in this box). > > 2. put '-v' on the Boot: prompt, obtain the IRQ and port address of the > > card, and give that to the ed0 device. > Do you mean after I boot the FreeBSD bootdisk? > If so, could you give an example how to do this? > this is like the following? > > Boot: -v <here, how to obtain the IRQ and port address????> Just -v. Note the information you get for the device (use scroll-lock and up arrow) and post it. > > I think. 2.2, I believe, has a smart ed device driver that can probe the > > PCI bus as well. > > > > > The card works excellent with Microsoft windows(3.11,95,NT) ,and being used > > > by IRQ 11 and I/O address 1000-101F under Win95. > > > > You gave this info to the ed0 device in -c, right? > What do you mean by "-c" here? UserConfig, ie, put -c on the Boot: prompt to enter the device config editor. > If it is hard to explain everything here, could you please tell me where I > can get more information about setting up a network card on FreeBSD? Well, you have a special situation in that you have a PCI NE2000 card. They are normally ISA cards. Doug White | University of Oregon Internet: dwhite@resnet.uoregon.edu | Residence Networking Assistant http://gladstone.uoregon.edu/~dwhite | Computer Science Major
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSI.3.94.961204212247.7328G-100000>