Date: Fri, 27 Nov 1998 09:29:51 -0800 From: Mike Smith <mike@smith.net.au> To: Werner Griessl <werner@btp1da.phy.uni-bayreuth.de> Cc: Edwin Culp <eculp@webwizard.org.mx>, FreeBSD-Current@FreeBSD.ORG, jabc@webwizard.org.mx, eculp@MexComUSA.net, Mike Smith <mike@smith.net.au> Subject: Re: IBM Netfinity 3500 Message-ID: <199811271729.JAA03165@dingo.cdrom.com> In-Reply-To: Your message of "Fri, 27 Nov 1998 15:07:11 %2B0100." <XFMail.981127150711.werner@btp1da.phy.uni-bayreuth.de>
next in thread | previous in thread | raw e-mail | index | archive | help
> > On 25-Nov-98 Edwin Culp wrote: > > Mike Smith wrote: > > > >> I don't know. You might want to talk to David Greenman about this one; > >> he might have some ideas. You might also want to send the 'mptable' > >> output to the SMP folks; they may have some ideas about interrupt > >> routing that might shed some light on the situation. > >> > >> If you have time to tinker with the machine at all, it'd be very > >> educational to add some debugging to the PCI interrupt handling code to > >> see what's actually going on. A good start would be the interrupt > >> handler for the 'fxp' device. > >> > > > > I don't have a better idea. IŽll give it a try. Thanks again. > > > > ed > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-current" in the body of the message > > ---------------------------------- > > Have the same problem here with a Compaq-AP200 with any fxp-card. > The AP400 is working even with the buildin fxp. > But 2.2.7-Stable is working on both, so there must be a difference between > Stable and Current in the fxp-driver. Sounds about right. Both of you should be talking to David Greenman <dg@freebsd.org> about this; make sure you get all the low-level information (PCI chipset, revision of FXP devices, etc.) to him as well. -- \\ Sometimes you're ahead, \\ Mike Smith \\ sometimes you're behind. \\ mike@smith.net.au \\ The race is long, and in the \\ msmith@freebsd.org \\ end it's only with yourself. \\ msmith@cdrom.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199811271729.JAA03165>