Date: Sat, 20 Sep 2008 12:00:46 +1000 From: Da Rock <rock_on_the_web@comcen.com.au> To: freebsd-questions@freebsd.org Subject: Re: Realtek 8111C? Message-ID: <1221876046.4625.4.camel@laptop1.herveybayaustralia.com.au> In-Reply-To: <alpine.BSF.2.00.0809191249290.9608@wonkity.com> References: <48D3D0A8.7070504@mindling.com> <alpine.BSF.2.00.0809191249290.9608@wonkity.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, 2008-09-19 at 13:21 -0600, Warren Block wrote: > On Fri, 19 Sep 2008, Sebastian wrote: > > > I'd like to confirm my understanding of current status on this NIC. It seems, > > based on some searching, the current Realtek driver in FreeBSD doesn't > > support the 8111C, and that although the vendor-supplied driver _may_ work > > for older 5.x and 6.0 releases (if one can get it compiled, I couldn't), it > > doesn't work in 6.3 or 7. So the RTL8111C is effectively not supported. True? > > A new MSI P45 Neo3-FR motherboard with an 8111C shows it working with > 7.1-PRERELEASE. The support for the 8111C is pretty new (July in CVS), > but so far it seems okay with this instance. > > uname -a: > > FreeBSD lightning 7.1-PRERELEASE FreeBSD 7.1-PRERELEASE #0: Fri Sep 19 > 18:48:47 MDT 2008 root@:/usr/obj/usr/src/sys/GENERIC i386 > > dmesg: > > re0: <RealTek 8168/8168B/8168C/8168CP/8111B/8111C/8111CP PCIe Gigabit Ethernet> port 0xd800-0xd8ff mem > 0xfdfff000-0xfdffffff,0xfdfe0000-0xfdfeffff irq 17 at device 0.0 on pci4 > > pciconf -lv: > > re0@pci0:4:0:0: class=0x020000 card=0x514c1462 chip=0x816810ec rev=0x02 hdr=0x00 > vendor = 'Realtek Semiconductor' > device = 'RTL8168/8111 PCI-E Gigabit Ethernet NIC' > class = network > subclass = ethernet > > ifconfig: > > re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 > options=389b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_UCAST,WOL_MCAST,WOL_MAGIC> > ether 00:1d:92:f4:02:38 > inet 10.0.0.213 netmask 0xffffff00 broadcast 10.0.0.255 > media: Ethernet autoselect (100baseTX <full-duplex>) > status: active I have used the compiled driver on 6.3 with success- but then I've used the driver linked in a post to drivers list. 7.0 is a no go. 7.1 support may be due to the request made in the drivers list that I mentioned. Other than that, good luck!
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1221876046.4625.4.camel>