Date: Mon, 28 Feb 2022 15:03:39 -0500 From: mike tancsa <mike@sentex.net> To: Navdeep Parhar <np@FreeBSD.org>, FreeBSD-STABLE Mailing List <freebsd-stable@freebsd.org> Subject: Re: cxgbe firmware error on latest RELENG_13 Message-ID: <3c4c4cef-e737-5b09-92b3-d7d74d8690bb@sentex.net> In-Reply-To: <b1d4252f-4677-e095-41fa-a83e86e062ea@FreeBSD.org> References: <49736514-6500-4c7d-889d-15697d934f04@sentex.net> <8f3a6c6a-8d4c-7802-49a8-f0b8a6635723@FreeBSD.org> <0c37c656-3eeb-006f-118b-e06067affe81@sentex.net> <b1d4252f-4677-e095-41fa-a83e86e062ea@FreeBSD.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On 2/28/2022 2:51 PM, Navdeep Parhar wrote: > On 2/28/22 11:48 AM, mike tancsa wrote: >> On 2/28/2022 2:43 PM, Navdeep Parhar wrote: >>> On 2/28/22 11:36 AM, mike tancsa wrote: >>>> Hi Navdeep, >>>> >>>> I updated a pair of releng13 boxes today as I saw there are >>>> new drivers/firmware. However, the firmware seems to fail on both >>>> in different ways >>>> >>>> t5nex0: <Chelsio T540-CR> mem >>>> 0x91300000-0x9137ffff,0x90000000-0x90ffffff,0x91984000-0x91985fff >>>> irq 17 at device 0.4 on pci2 >>>> t5nex0: failed to load firmware module: 2. cfg 0, fw 0 >>>> t5nex0: firmware on card (1.25.0.40) is older than the version >>>> bundled with this driver, but the driver cannot take corrective >>>> action because it is unable to load the firmware module. >>> >>> It looks like the firmware KLD isn't available even though you have >>> t5fw_cfg_load="yes" in loader.conf. >>> >>> Can you try removing the cxgbe lines from loader.conf temporarily >>> and kldload if_cxgbe manually after boot? It should be able to find >>> the KLD with the firmware and update the card. Then restore the >>> lines in loader.conf and see if it comes up properly. >>> >> Hi, >> >> It worked on the 4 port but not the 2 port unit >> >> root@coldstorage1:~ # kldload if_cxgbe >> t5nex0: <Chelsio T520-LL-CR> mem >> 0xb2300000-0xb237ffff,0xb1000000-0xb1ffffff,0xb28a0000-0xb28a1fff irq >> 16 at device 0.4 on pci1 >> t5nex0: failed to connect to the firmware: 6, 0. PCIE_FW 0x80000000 >> t5nex0: error during attach, adapter is now in recovery mode. >> root@coldstorage1:~ # > > Try a manual firmware upgrade while it's in recovery mode. The > firmwares are the sys/dev/cxgbe/firmware/*.bin files in the src tree. > > # cxgbetool t5nex0 loadfw .../t5fw-1.26.6.0.bin > > Then reboot the system. > it seems to load it ok, but no luck after a soft reboot root@coldstorage1:/usr/src/sys/dev/cxgbe/firmware # cxgbetool t5nex0 loadfw t5fw-1.26.6.0.bin root@coldstorage1:/usr/src/sys/dev/cxgbe/firmware # md5 t5fw-1.26.6.0.bin MD5 (t5fw-1.26.6.0.bin) = 2a11a3d808b37d31e9caf19f75976e5b root@coldstorage1:/usr/src/sys/dev/cxgbe/firmware # But I did a full power cycle and it seemed to work after that! root@coldstorage1:~ # kldload if_cxgbe t5nex0: <Chelsio T520-LL-CR> mem 0xb2300000-0xb237ffff,0xb1000000-0xb1ffffff,0xb28a0000-0xb28a1fff irq 16 at device 0.4 on pci1 t5nex0: PCIe gen3 x8, 2 ports, 14 MSI-X interrupts, 30 eq, 13 iq cxl0: <port 0> on t5nex0 cxl0: 4 txq, 4 rxq (NIC); 4 txq (TOE), 2 rxq (TOE) cxl1: <port 1> on t5nex0 cxl1: 4 txq, 4 rxq (NIC); 4 txq (TOE), 2 rxq (TOE) root@coldstorage1:~ # Thank you very much for your quick help to get me back up and running ---Mike
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3c4c4cef-e737-5b09-92b3-d7d74d8690bb>