Date: Thu, 15 Aug 2019 23:17:22 -0400 From: eteep <eteepfiles@gmail.com> To: Graham Perrin <grahamperrin@gmail.com> Cc: freebsd-questions@freebsd.org Subject: Re: Firefox or what? Message-ID: <90fd26b1-a99e-0b61-7dbb-e32db70a70d9@gmail.com> In-Reply-To: <bc8f972f-11e8-c5ab-d153-745e11d4e8f1@gmail.com> References: <60D6EFE4-D594-4E61-8B57-D4E4876EAC83@gmail.com> <94174381.4786965.1565712010541@mail.yahoo.com> <575C1CB1-AE19-46AA-90F3-3805CFA6ECE6@gmail.com> <bc8f972f-11e8-c5ab-d153-745e11d4e8f1@gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Copyright (c) 1992-2018 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 11.2-RELEASE-p5 #0: Tue Nov 27 09:33:52 UTC 2018 root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64 FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0) VT(vga): text 80x25 CPU: Intel(R) Pentium(R) CPU G3220 @ 3.00GHz (2993.13-MHz K8-class CPU) Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x4ddaebbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,XSAVE,OSXSAVE,RDRAND> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x21<LAHF,ABM> Structured Extended Features=0x2603<FSGSBASE,TSCADJ,ERMS,INVPCID,NFPUSG> XSAVE Features=0x1<XSAVEOPT> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 4294967296 (4096 MB) avail memory = 3972927488 (3788 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <ACRSYS ACRPRDCT> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) ioapic0 <Version 2.0> irqs 0-23 on motherboard SMP: AP CPU #1 Launched! Timecounter "TSC-low" frequency 1496565608 Hz quality 1000 Cuse v0.1.35 @ /dev/cuse random: entropy device external interface kbd1 at kbdmux0 netmap: loaded module module_register_init: MOD_LOAD (vesa, 0xffffffff80ff4580, 0) error 19 random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" nexus0 vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard acpi0: <ACRSYS ACRPRDCT> on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 Event timer "HPET4" frequency 14318180 Hz quality 440 Event timer "HPET5" frequency 14318180 Hz quality 440 Event timer "HPET6" frequency 14318180 Hz quality 440 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7800000-0xf7bfffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 vgapci0: Boot video device hdac0: <Intel Haswell HDA Controller> mem 0xf7d14000-0xf7d17fff irq 16 at device 3.0 on pci0 xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7d00000-0xf7d0ffff irq 16 at device 20.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA xhci0: Port routing mask set to 0xffffffff usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 pci0: <simple comms> at device 22.0 (no driver attached) ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7d1c000-0xf7d1c3ff irq 16 at device 26.0 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci0 usbus1: 480Mbps High Speed USB v2.0 hdac1: <Intel Lynx Point HDA Controller> mem 0xf7d10000-0xf7d13fff irq 22 at device 27.0 on pci0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pcib1: [GIANT-LOCKED] pcib2: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 pci1: <ACPI PCI bus> on pcib2 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xf7c00000-0xf7c00fff,0xf0000000-0xf0003fff irq 18 at device 0.0 on pci1 re0: Using 1 MSI-X message re0: ASPM disabled re0: Chip rev. 0x2c000000 re0: MAC rev. 0x00200000 miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: 74:27:ea:f5:28:86 re0: netmap queues/slots: TX 1/256, RX 1/256 ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7d1b000-0xf7d1b3ff irq 23 at device 29.0 on pci0 usbus2: EHCI version 1.0 usbus2 on ehci1 usbus2: 480Mbps High Speed USB v2.0 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7d1a000-0xf7d1a7ff irq 21 at device 31.2 on pci0 ahci0: AHCI v1.30 with 4 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 acpi_button0: <Power Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_tz1: <Thermal Zone> on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] est0: <Enhanced SpeedStep Frequency Control> on cpu0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 Timecounters tick every 1.000 msec hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0 hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0 hdacc1: <Realtek ALC662 HDA CODEC> at cad 0 on hdac1 hdaa1: <Realtek ALC662 Audio Function Group> at nid 1 on hdacc1 pcm0: <Realtek ALC662 (Analog 2.0+HP/2.0)> at nid 20,27 and 24,25,26 on hdaa1 pcm1: <Realtek ALC662 (Onboard Analog Speaker)> at nid 21 on hdaa1 ugen2.1: <Intel EHCI root HUB> at usbus2 ugen0.1: <0x8086 XHCI root HUB> at usbus0 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 ugen1.1: <Intel EHCI root HUB> at usbus1 uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 ses0 at ahciem0 bus 0 scbus2 target 0 lun 0 ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device ses0: SEMB SES Device ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <ST1000DM003-1SB10C CC43> ATA8-ACS SATA 3.x device ada0: Serial Number Z9A0PJJV ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 953869MB (1953525168 512 byte sectors) ada0: quirks=0x1<4K> Trying to mount root from ufs:/dev/ada0a [rw]... cd0 at ahcich1 bus 0 scbus1 target 0 lun 0 cd0: <HL-DT-ST DVDRAM GHA2N 1.00> Removable CD-ROM SCSI device cd0: Serial Number K4KD7TF5503 cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed uhub1: 17 ports with 17 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub0: 2 ports with 2 removable, self powered ugen0.2: <vendor 0x0a12 product 0x0001> at usbus0 ugen2.2: <vendor 0x8087 product 0x8000> at usbus2 uhub3 on uhub0 uhub3: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> on usbus2 ugen1.2: <vendor 0x8087 product 0x8008> at usbus1 uhub4 on uhub2 uhub4: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, addr 2> on usbus1 uhub4: 4 ports with 4 removable, self powered uhub3: 6 ports with 6 removable, self powered random: unblocking device. ugen0.3: <Realtek RTL2838UHIDIR> at usbus0 ugen0.4: <vendor 0x04d9 USB Keyboard> at usbus0 ukbd0 on uhub1 ukbd0: <vendor 0x04d9 USB Keyboard, class 0/0, rev 2.00/1.02, addr 3> on usbus0 kbd2 at ukbd0 ukbd1 on uhub1 ukbd1: <vendor 0x04d9 USB Keyboard, class 0/0, rev 2.00/1.02, addr 3> on usbus0 kbd3 at ukbd1 re0: link state changed to DOWN ugen0.5: <PixArt USB Optical Mouse> at usbus0 re0: link state changed to UP ubt0 on uhub1 ubt0: <vendor 0x0a12 product 0x0001, class 224/1, rev 1.10/1.34, addr 1> on usbus0 uhid0 on uhub1 uhid0: <vendor 0x04d9 USB Keyboard, class 0/0, rev 2.00/1.02, addr 3> on usbus0 ums0 on uhub1 ums0: <PixArt USB Optical Mouse, class 0/0, rev 2.00/1.00, addr 4> on usbus0 ums0: 3 buttons and [XYZ] coordinates ID=0 WARNING: attempt to domain_add(bluetooth) after domainfinalize() WARNING pid 1032 (python2.7): ioctl sign-extension ioctl ffffffff80087467 WARNING pid 1033 (python2.7): ioctl sign-extension ioctl ffffffff80087467 WARNING pid 1034 (python2.7): ioctl sign-extension ioctl ffffffff80087467 re0: link state changed to DOWN re0: link state changed to UP ugen0.3: <Realtek RTL2838UHIDIR> at usbus0 (disconnected) ugen0.3: <Realtek RTL2838UHIDIR> at usbus0 re0: link state changed to DOWN re0: link state changed to UP WARNING pid 17227 (python2.7): ioctl sign-extension ioctl ffffffff80087467 WARNING pid 17228 (python2.7): ioctl sign-extension ioctl ffffffff80087467 WARNING pid 17229 (python2.7): ioctl sign-extension ioctl ffffffff80087467 re0: link state changed to DOWN re0: link state changed to UP re0: link state changed to DOWN re0: link state changed to UP WARNING pid 33447 (python2.7): ioctl sign-extension ioctl ffffffff80087467 WARNING pid 33448 (python2.7): ioctl sign-extension ioctl ffffffff80087467 WARNING pid 33449 (python2.7): ioctl sign-extension ioctl ffffffff80087467 re0: link state changed to DOWN re0: link state changed to UP ... net.local.stream.recvspace: 8192 On 8/14/19 5:20 PM, Graham Perrin wrote: > On 14/08/2019 13:47, Eric wrote: >> … Let me know what other logs might be useful … > > To know whether you have worked around a known bug: > > sysctl net.local.stream.recvspace >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?90fd26b1-a99e-0b61-7dbb-e32db70a70d9>