Date: Fri, 23 Dec 2016 22:30:02 +0300 From: Slawa Olhovchenkov <slw@zxy.spb.ru> To: Willem Jan Withagen <wjw@digiware.nl> Cc: Adrian Chadd <adrian.chadd@gmail.com>, Konstantin Belousov <kostikbel@gmail.com>, freebsd-current <freebsd-current@freebsd.org> Subject: Re: Enabling NUMA in BIOS stop booting FreeBSD Message-ID: <20161223193001.GC37118@zxy.spb.ru> In-Reply-To: <c3c3ae7a-f24f-9157-fc3c-623d2ce27143@digiware.nl> References: <20161214190349.GJ94325@kib.kiev.ua> <20161215105118.GK98176@zxy.spb.ru> <20161215123330.GQ94325@kib.kiev.ua> <20161215131624.GL98176@zxy.spb.ru> <20161215135656.GS94325@kib.kiev.ua> <20161215224500.GM98176@zxy.spb.ru> <CAJ-Vmon8NX9c0C6rK896UoSDdT=L0MVLuNkciuwzrgv9dEYjuA@mail.gmail.com> <3792b7ea-0818-b358-4091-d78c3214a09c@digiware.nl> <20161223132627.GA37153@zxy.spb.ru> <c3c3ae7a-f24f-9157-fc3c-623d2ce27143@digiware.nl>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, Dec 23, 2016 at 08:16:39PM +0100, Willem Jan Withagen wrote: > On 23-12-2016 14:26, Slawa Olhovchenkov wrote: > > On Thu, Dec 22, 2016 at 09:26:02PM +0100, Willem Jan Withagen wrote: > > > >> On 16-12-2016 00:57, Adrian Chadd wrote: > >>> heh, an updated BIOS that solves the problem will solve the problem. :) > >>> > >>> I think you have enough information to provide to supermicro. Ie, > >>> "SMAP says X, when physical memory pages at addresses X are accessed, > >>> they don't behave like memory, maybe something is wrong". > >>> > >>> All I can think of is some hack to add a blacklist for that region so > >>> you can boot the unit. But it makes me wonder what else is going on. > >> > >> I have an X10DRL-iT with 256Gb and 2* 2630V4 available for testing until > >> begin January. Started it on 11-RELEASE and upgraded to 12-CURRENT of > >> 20-12-2016. > >> Boots just fine, and seems to run OKE. > >> > >> If anything useful to test, just let me know. > > > > For touch issuse you must enable in BIOS both NUMA and Memory > > Interleave below 4G. > > Numa was already on, but I cannot find the Memory Interleave option. for X10DRi: Advanced/Chipset Config/North Bridge/Memory Config/Socket Interleave below 4G
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20161223193001.GC37118>