Date: Fri, 15 Jun 2012 07:50:49 -0600 (MDT) From: Warren Block <wblock@wonkity.com> To: Ronald Klop <ronald-freebsd8@klop.yi.org> Cc: freebsd-stable@freebsd.org Subject: Re: devd problem with 9-stable Message-ID: <alpine.BSF.2.00.1206150746510.25418@wonkity.com> In-Reply-To: <op.wfxpy80b8527sy@ronaldradial.versatec.local> References: <CAN6yY1vOHDJzbScVFmgMdnL4JZGb2HUvh=DnL0GNdiH0OUpZ8w@mail.gmail.com> <op.wfv09jqu8527sy@ronaldradial.versatec.local> <CAN6yY1sGp47FZnkX0UuCzH__XXPwO3GVzywT%2B00_SNSg2g-Ywg@mail.gmail.com> <op.wfxpy80b8527sy@ronaldradial.versatec.local>
next in thread | previous in thread | raw e-mail | index | archive | help
On Fri, 15 Jun 2012, Ronald Klop wrote:
> On Fri, 15 Jun 2012 08:01:21 +0200, Kevin Oberman <kob6558@gmail.com> wrote:
>
>> On Thu, Jun 14, 2012 at 3:11 AM, Ronald Klop
>> <ronald-freebsd8@klop.yi.org> wrote:
>>> On Thu, 14 Jun 2012 02:41:58 +0200, Kevin Oberman <kob6558@gmail.com>
>>> wrote:
>>>
>>>> Since updating my systems to 9-Stable, I am not getting my smartcard
>>>> reader attached when hot-plugged.
>>>>
>>>>> From devd.conf
>>>>
>>>> attach 50 {
>>>> device-name "ugen[0-9]+";
>>>> match "vendor" "0x0529";
>>>> match "product" "0x0600";
>>>> action "/usr/local/sbin/openct-control attach usb:529/600 usb
>>>> /dev/$dev$
>>>> };
>>>> detach 50 {
>>>> device-name "ugen[0-9]+";
>>>> match "vendor" "0x0529";
>>>> match "product" "0x0600";
>>>> action "/usr/bin/pkill -fx '/usr/local/sbin/ifdhandler -H -p
>>>> [a-z0-9]+ $
>>>> };
>>>>
>>>> If I manually enter the "action" command, it works fine, but it fails
>>>> when I insert the device. It worked fine under version 8. I have
>>>> confirmed devd is seeing the device inserted just fine. the action
>>>> just does not seem to be carried out.
>>>>
>>>> Any idea where I should look? I saw a couple of threads on current
>>>> from others seeing something similar, but could find no resolution.
>>>> I have seen a
>>>
>>>
>>> Did you run devd with debug messages on? Options -D and -d are helpful.
>>> If you do does devd match the right devd.conf sections and start the
>>> action?
>>
>> With debug i get:
>> Processing event '!system=USB subsystem=DEVICE type=ATTACH
>> ugen=ugen1.3 cdev=ugen1.3 vendor=0x0529 product=0x0600 devclass=0xff
>> devsubclass=0x00 sernum="" release=0x0100 mode=host port=1
>> parent=ugen1.2'
>> [long list of "Testing" entries, none of which 'vendor' matched]
>> Executing 'logger Unknown USB device: vendor 0x0529 product 0x0600 bus
>> uhub3'
>>
>> So it looks like devd is not matching the vendor. But my devd.conf
>> file contains that vendor. I don't know exactly why it is not being
>> tested against. Nothing in the debug output gives me a clue and I
>> tried grepping for one of the tested vendor IDs in /etc/devd.conf and
>> /etc/devd/*.conf. Not found.
>>
>> I am at a loss.
>
> http://www.freebsd.org/releases/9.0R/errata.html
> See point 3 under Open Issues.
Even with those changes, devd is not triggering on my scanner attach:
match "subsystem" "DEVICE";
match "type" "ATTACH";
match "cdev" "ugen[0-9]+.[0-9]+";
match "vendor" "0x04b8";
match "product" "0x010a";
action "echo HERE! $cdev > /tmp/zoot";
# devd -d -D -f /etc/devd/wb.conf
Processing event '!system=USB subsystem=DEVICE type=ATTACH ugen=ugen0.6
cdev=ugen0.6 vendor=0x04b8 product=0x010a devclass=0xff devsubclass=0xff
sernum="" release=0x0103 mode=host port=4 parent=ugen0.4'
Pushing table
setting system=USB
setting subsystem=DEVICE
setting type=ATTACH
setting ugen=ugen0.6
setting cdev=ugen0.6
setting vendor=0x04b8
setting product=0x010a
setting devclass=0xff
setting devsubclass=0xff
setting sernum=
setting release=0x0103
setting mode=host
setting port=4
setting parent=ugen0.4
Processing notify event
Testing system=USB against ^DEVFS
Testing system=USB against ^DEVFS
Popping table
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?alpine.BSF.2.00.1206150746510.25418>