Date: Tue, 13 Aug 2002 14:56:18 -0700 From: Kent Stewart <kstewart@owt.com> To: Joseph Wright <JWRIGHT@mbakercorp.com> Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Unable to cdrom/dvd to work Message-ID: <3D598082.7000800@owt.com> References: <sd59383a.099@mbakercorp.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Joseph Wright wrote: > I checked in /dev and the device is listed, also here is a copy of my kernel. I didn't see anything maybe someone else will. What version of the system are you using. I'm running 3.6-stable. Kent > > Thanks > > machine i386 > cpu I686_CPU > ident GENERIC > maxusers 0 > > options INET #InterNETworking > options INET6 #IPv6 communications protocols > options FFS #Berkeley Fast Filesystem > options FFS_ROOT #FFS usable as root device [keep this!] > options SOFTUPDATES #Enable FFS soft updates support > options UFS_DIRHASH #Improve performance on big directories > options MFS #Memory Filesystem > options MD_ROOT #MD is a potential root device > options NFS #Network Filesystem > options NFS_ROOT #NFS usable as root device, NFS required > options MSDOSFS #MSDOS Filesystem > options CD9660 #ISO 9660 Filesystem > options CD9660_ROOT #CD-ROM usable as root, CD9660 required > options PROCFS #Process filesystem > options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] > options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI > options UCONSOLE #Allow users to grab the console > options USERCONFIG #boot -c editor > options VISUAL_USERCONFIG #visual boot -c editor > options KTRACE #ktrace(1) support > options SYSVSHM #SYSV-style shared memory > options SYSVMSG #SYSV-style message queues > options SYSVSEM #SYSV-style semaphores > options P1003_1B #Posix P1003_1B real-time extensions > options _KPOSIX_PRIORITY_SCHEDULING > options ICMP_BANDLIM #Rate limit bad replies > options KBD_INSTALL_CDEV # install a CDEV entry in /dev > > device isa > device eisa > device pci > > #SMB Interface > device smbus > device iicbus > device iicbb > device intpm > device smb > device alpm > device ichsmb > device ic > device iic > device iicsmb > > # Floppy drives > device fdc0 at isa? port IO_FD1 irq 6 drq 2 > device fd0 at fdc0 drive 0 > device fd1 at fdc0 drive 1 > > # ATA and ATAPI devices > device ata0 at isa? port IO_WD1 irq 14 > device ata1 at isa? port IO_WD2 irq 15 > device ata > device atadisk # ATA disk drives > device atapicd # ATAPI CDROM drives > device atapifd # ATAPI floppy drives > device atapist # ATAPI tape drives > options ATA_STATIC_ID #Static device numbering > > # SCSI peripherals > device scbus # SCSI bus (required) > device da # Direct Access (disks) > device sa # Sequential Access (tape etc) > device cd # CD > device pass # Passthrough device (direct SCSI access) > > # atkbdc0 controls both the keyboard and the PS/2 mouse > device atkbdc0 at isa? port IO_KBD > device atkbd0 at atkbdc? irq 1 flags 0x1 > device psm0 at atkbdc? irq 12 > > device vga0 at isa? > > # splash screen/screen saver > pseudo-device splash > > # syscons is the default console driver, resembling an SCO console > device sc0 at isa? flags 0x100 > > # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver > #device vt0 at isa? > #options XSERVER # support for X server on a vt console > #options FAT_CURSOR # start with block cursor > # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines > #options PCVT_SCANSET=2 # IBM keyboards are non-std > > # Floating point support - do not disable. > device npx0 at nexus? port IO_NPX irq 13 > > # Power management support (see LINT for more options) > device apm0 at nexus? disable flags 0x20 # Advanced Power Management > > # Serial (COM) ports > device sio0 at isa? port IO_COM1 flags 0x10 irq 4 > device sio1 at isa? port IO_COM2 irq 3 > device sio2 at isa? disable port IO_COM3 irq 5 > device sio3 at isa? disable port IO_COM4 irq 9 > > # Parallel port > device ppc0 at isa? irq 7 > device ppbus # Parallel port bus (required) > device lpt # Printer > device plip # TCP/IP over parallel > device ppi # Parallel port interface device > #device vpo # Requires scbus and da > > > # PCI Ethernet NICs. > device de # DEC/Intel DC21x4x (``Tulip'') > device em # Intel PRO/1000 adapter Gigabit Ethernet Card (``Wiseman'') > device txp # 3Com 3cR990 (``Typhoon'') > device vx # 3Com 3c590, 3c595 (``Vortex'') > > # PCI Ethernet NICs that use the common MII bus controller code. > # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! > device miibus # MII bus support > device sis # Silicon Integrated Systems SiS 900/SiS 7016 > device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') > > # ISA Ethernet NICs. > # 'device ed' requires 'device miibus' > device ed0 at isa? port 0x280 irq 10 iomem 0xd8000 > device ex > device ep > device fe0 at isa? port 0x300 > > # The probe order of these is presently determined by i386/isa/isa_compat.c. > device ie0 at isa? port 0x300 irq 10 iomem 0xd0000 > #device le0 at isa? port 0x300 irq 5 iomem 0xd0000 > device lnc0 at isa? port 0x280 irq 10 drq 0 > device cs0 at isa? port 0x300 > device sn0 at isa? port 0x300 irq 10 > > # Pseudo devices - the number indicates how many units to allocate. > pseudo-device loop # Network loopback > pseudo-device ether # Ethernet support > pseudo-device sl 1 # Kernel SLIP > pseudo-device ppp 1 # Kernel PPP > pseudo-device tun # Packet tunnel. > pseudo-device pty # Pseudo-ttys (telnet etc) > pseudo-device md # Memory "disks" > pseudo-device gif # IPv6 and IPv4 tunneling > pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) > > # The `bpf' pseudo-device enables the Berkeley Packet Filter. > # Be aware of the administrative consequences of enabling this! > pseudo-device bpf #Berkeley packet filter > > # USB support > device uhci # UHCI PCI->USB interface > device ohci # OHCI PCI->USB interface > device usb # USB Bus (required) > device ugen # Generic > device uhid # "Human Interface Devices" > device ukbd # Keyboard > device ulpt # Printer > device umass # Disks/Mass storage - Requires scbus and da > device ums # Mouse > device uscanner # Scanners > device urio # Diamond Rio MP3 Player > # USB Ethernet, requires mii > device aue # ADMtek USB ethernet > device cue # CATC USB ethernet > device kue # Kawasaki LSI USB ethernet > > >>>>Kent Stewart <kstewart@owt.com> 08/13/02 03:35PM >>> >>>> > > > Joseph Wright wrote: > > >>I am trying to get my DVD/CDROM working and have checked my kernel for atapi for cdrom and everything looks good but when I check the output of dmesg I am seeing: ata1-slave: <DITEFN DVD-ROD DTD163/FD@6> Unknown device - NO DRIVER. >> >>I recompiled the GENERIC kernel just for grins but I am still recieving this message. >> >>any clues? >> > > > You didn't list your kernel config and mine works. Did you create the > device in /dev? > > What I see is > > acd0: DVD-ROM <ATAPI DVD-ROM 16X Maximum> at ata1-master UDMA66 > > Kent > > > >>thanks >> >> >>To Unsubscribe: send mail to majordomo@FreeBSD.org >>with "unsubscribe freebsd-questions" in the body of the message >> >>. >> >> >> > > -- Kent Stewart Richland, WA http://users.owt.com/kstewart/index.html To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3D598082.7000800>