Date: Thu, 16 Sep 2010 08:31:29 -0600 (MDT) From: Warren Block <wblock@wonkity.com> To: Marcin Cieslak <saper@saper.info> Cc: freebsd-embedded@freebsd.org Subject: Re: CFT: arduino-0019 port Message-ID: <alpine.BSF.2.00.1009160749250.68231@wonkity.com> In-Reply-To: <slrni942n1.177v.saper@saper.info> References: <alpine.BSF.2.00.1009142019230.60426@wonkity.com> <alpine.BSF.2.00.1009142119590.61732@wonkity.com> <slrni942n1.177v.saper@saper.info>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, 16 Sep 2010, Marcin Cieslak wrote: > FreeBSD 9.0-CURRENT #0 r212217: Thu Sep 9 15:57:36 CEST 2010 > on amd64 I'm using 8-stable i386. > packages: > > avrdude-5.10 > rxtx-jdk16-2.1.7r2_5 > jdk-1.6.0.3p4_3 Your jdk is a little old. jdk-1.6.0.3p4_17 is current. > (1) First, opening a Tools menu has a noticeable delay (although not that bad > as on Windows, it's literally seconds there). Sometimes Tools menu > (esp. for a first time opens without "Board" and "Port" selection items. There's a serial port access when that menu is touched. It causes D13 to flash on a test board, probably just a reset on the Arduino. > (2) After startup with default sketch window, I try to open > Examples -> ArduinoISP. It opens in a second window, but the first > one flickers badly at the bottom. Both windows seem to work (menu > opens there etc. but flickering is very annoing). > > I am using dwm non-reparenting window manager (x11-wm/dwm) that > changes window size automatically, maybe it's related to this. Haven't seen that on xfce4. A quick test shows that dwm... will take more than a quick test to figure out. > (3) Quitting JVM is low (after Arduino windows close it takes > a while to get back to the command line). Not seen here, but there are too many differences to say why. > (4) Compilation and upload using avrdude worked fine. Excellent! > (5) Attempt to use serial monitor results in a crash. > > I tried first time with /dev/cuaU1 (where Arduino running ArduinoISP > is connected) - serial monitor opened, I switched from 9600 to 192000 > but after entering "space", "zero" > and "^T" in the box and pressing "Send", JVM crashed. (crash hs_err_pid40041.log). > > Second time I tried with /dev/cuaU0 (Arudino running amforth) > opening Serial Monitor caused this immediately (crash hs_err_id55889.log). Both crashes are in rxtx, although maybe not its fault. freebsd-java list denizens might be able to shed light on it. Thanks!
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?alpine.BSF.2.00.1009160749250.68231>