Skip site navigation (1)Skip section navigation (2)
Date:      9 Jan 2004 08:56:01 -0000
From:      andy-freebsd@splashground.de
To:        Dag-Erling =?iso-8859-1?q?Sm=F8rgrav?= <des@des.no>
Cc:        current@freebsd.org
Subject:   Re: Problems with Promise FastTrak
Message-ID:  <20040109085601.20479.qmail@paladin.fortunaty.net>
In-Reply-To: <xzpu1351qmb.fsf@dwp.des.no>
References:  <20040109001353.16836.qmail@paladin.fortunaty.net> (andy@splashground.de's message of "9 Jan 2004 00:13:53 -0000"),<xzpu1351qmb.fsf@dwp.des.no>

next in thread | previous in thread | raw e-mail | index | archive | help
des wrote @ Fri, 09 Jan 2004 09:19:08 +0100:
> andy@splashground.de writes:
> > It's now master but that didn't change anything.
> > Reading crawls around 5MB/s and writing around 2 MB/s
> > and when writing the mouse misbehaves and there are
> > stalls > 10s.
> 
> Sounds like it's using PIO instead of DMA.  What does your dmesg say?


    ----8<----
root@tower: atacontrol list
ATA channel 0:
    Master:  ad0 <IC35L120AVV207-0/V24OA63A> ATA/ATAPI rev 6
    Slave:       no device present
ATA channel 1:
    Master:      no device present
    Slave:  acd0 <20X10/H.DH> ATA/ATAPI rev 0
ATA channel 2:
    Master:  ad4 <IC35L120AVV207-0/V24OA63A> ATA/ATAPI rev 6
    Slave:       no device present
ATA channel 3:
    Master:      no device present
    Slave:       no device present
root@tower: atacontrol mode 2
Master = UDMA100
Slave  = BIOSPIO
    ---->8----

----8<----- tower: dmesg ----8<----
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.2-BETA #2: Thu Jan  8 10:37:44 CET 2004
    inst@tower.paradise.splashground.de:/usr/obj/usr/src/sys/TOWER
acpi_alloc_wakeup_handler: can't alloc wake memory
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a20000.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(TM) XP 1800+ (1535.21-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x662  Stepping = 2
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory  = 805289984 (767 MB)
avail memory = 771002368 (735 MB)
ACPI APIC Table: <ASUS   A7V333  >
ioapic0: Changing APIC ID to 2
ioapic0 <Version 0.2> irqs 0-23 on motherboard
Pentium Pro MTRR support enabled
VESA: v3.0, 32768k memory, flags:0x1, mode table:0xc00c52cd (c00052cd)
VESA: Matrox Graphics Inc.
acpi0: <ASUS   A7V333  > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 11 entries at 0xc00f1d90
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
acpi_cpu0: CLK_VAL field overlaps THT_EN bit
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA Generic host to PCI bridge> mem 0xe0000000-0xe7ffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
drm0: <Matrox G550 (AGP)> mem 0xdc800000-0xdcffffff,0xdd000000-0xdd003fff,0xde000000-0xdfffffff irq 16 at device 0.0 on pci1
info: [drm] AGP at 0xe0000000 128MB
info: [drm] Initialized mga 3.1.0 20021029 on minor 0
pcm0: <CMedia CMI8738> port 0xd800-0xd8ff irq 17 at device 5.0 on pci0
atapci0: <Promise PDC20276 UDMA133 controller> port 0xb000-0xb00f,0xb400-0xb403,0xb800-0xb807,0xd000-0xd003,0xd400-0xd407 mem 0xdc000000-0xdc003fff irq 19 at device 6.0 on pci0
atapci0: [MPSAFE]
ata2: at 0xd400 on atapci0
ata2: [MPSAFE]
ata3: at 0xb800 on atapci0
ata3: [MPSAFE]
fwohci0: vendor=104c, dev=8026
fwohci0: <1394 Open Host Controller Interface> mem 0xdb000000-0xdb003fff,0xdb800000-0xdb8007ff irq 17 at device 7.0 on pci0
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:e0:18:00:00:03:80:fa
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:e0:18:03:80:fa
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
uhci0: <VIA 83C572 USB controller> port 0xa800-0xa81f irq 19 at device 9.0 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xa400-0xa41f irq 16 at device 9.1 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 9.2 (no driver attached)
rl0: <RealTek 8139 10/100BaseTX> port 0xa000-0xa0ff mem 0xda000000-0xda0000ff irq 16 at device 13.0 on pci0
rl0: Ethernet address: 00:06:4f:02:1c:ed
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl1: <RealTek 8139 10/100BaseTX> port 0x9800-0x98ff mem 0xd9800000-0xd98000ff irq 17 at device 14.0 on pci0
rl1: Ethernet address: 00:e0:7d:02:1c:de
miibus1: <MII bus> on rl1
rlphy1: <RealTek internal media interface> on miibus1
rlphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcm1: <Yamaha DS-1E (YMF744)> port 0x9000-0x9003,0x9400-0x943f mem 0xd9000000-0xd9007fff irq 18 at device 15.0 on pci0
pcm1: <SigmaTel STAC9708/11 AC97 Codec>
sym0: <875> port 0x8800-0x88ff mem 0xd8000000-0xd8000fff,0xd8800000-0xd88000ff irq 19 at device 16.0 on pci0
sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <VIA 8233A UDMA133 controller> port 0x8400-0x840f at device 17.1 on pci0
ata0: at 0x1f0 irq 14 on atapci1
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci1
ata1: [MPSAFE]
uhci2: <VIA 83C572 USB controller> port 0x8000-0x801f irq 21 at device 17.2 on pci0
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0x7800-0x781f irq 21 at device 17.3 on pci0
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
ppbus0: IEEE1284 device found /NIBBLE/ECP
Probing for PnP devices on ppbus0:
ppbus0: <Hewlett-Packard OfficeJet Series 700.4.04c> MLC,PCL,PML
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pmtimer0 on isa0
orm0: <Option ROMs> at iomem 0xcc000-0xd47ff,0xc0000-0xc8fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1535213941 Hz quality 800
Timecounters tick every 10.000 msec
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to deny, logging limited to 100 packets/entry by default
IPv6 packet filtering initialized, unlimited logging
GEOM: create disk ad0 dp=0xc662ed60
ad0: 117800MB <IC35L120AVV207-0> [239340/16/63] at ata0-master UDMA100
acd0: CDRW <20X10> at ata1-slave WDMA2
GEOM: create disk ad4 dp=0xc662e960
ad4: 114440MB <IC35L120AVV207-0> [232514/16/63] at ata2-master UDMA100
GEOM: create disk ar0 dp=0xc6502de0
ar0: 114440MB <ATA RAID0 array> [14589/255/63] status: READY subdisks:
 disk0 READY on ad4 at ata2-master
Waiting 15 seconds for SCSI devices to settle
GEOM: create disk cd0 dp=0xc64bc600
GEOM: create disk cd1 dp=0xc64be600
cd1 at ata1 bus 0 target 1 lun 0
cd1: <ATAPI CD-R/RW 20X10 H.DH> Removable CD-ROM SCSI-0 device 
cd1: 16.000MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present
cd0 at sym0 bus 0 target 2 lun 0
cd0: <PIONEER DVD-ROM DVD-303 1.09> Removable CD-ROM SCSI-2 device 
cd0: 20.000MB/s transfers (20.000MHz, offset 8)
cd0: Attempt to query device size failed: NOT READY, Medium not present
Mounting root from ufs:/dev/ad0s1a
drm0: [MPSAFE]
Warning: pid 1420 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 1420 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 1420 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 1420 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 1420 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 1420 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 1420 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 1420 used static ldt allocation.
See the i386_set_ldt man page for more info
Warning: pid 1420 used static ldt allocation.
See the i386_set_ldt man page for more info
pid 29830 (gpgsm), uid 1001: exited on signal 10 (core dumped)
ad4: WARNING - WRITE_DMA recovered from missing interrupt
ad4: WARNING - WRITE_DMA recovered from missing interrupt
ad4: WARNING - WRITE_DMA recovered from missing interrupt
ad4: WARNING - WRITE_DMA recovered from missing interrupt
ad4: WARNING - WRITE_DMA recovered from missing interrupt
ad4: WARNING - WRITE_DMA recovered from missing interrupt
ad4: WARNING - WRITE_DMA recovered from missing interrupt
ad4: WARNING - WRITE_DMA recovered from missing interrupt
ad4: WARNING - READ_DMA recovered from missing interrupt
---->8----- tower: dmesg ---->8----

Andy



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040109085601.20479.qmail>