Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 30 May 1998 15:18:21 -0700
From:      "M. Evans" <rax@worldnet.att.net>
To:        <freebsd-questions@FreeBSD.ORG>
Subject:   ppp errors
Message-ID:  <000001bd8c18$daf5fda0$7750410c@atlantis.enigma.net>

next in thread | raw e-mail | index | archive | help

[-- Attachment #1 --]
Im sorry I forgot to include the errors Ive been getting and the config
files

/******Original message *******/
Hello
Help!

When dialing in ppp it connects fine, but it gives me a server error saying
it cannot set or find a server. I am inlcuding a text file with dumps from
logs and error message along with conf files.

Ive been working on this for about a week, and its probaly one of those
simple fixes that just eludes me, but if you need more info of files just
let me know.

Thankyou for your time

Kyle Evans
rax@worldnet.att.net

[-- Attachment #2 --]
I have a couple of dns addresses that I usually put in the resolv.conf if I was using
pppd in Linux, but I didnt see where I could add them in the script. Perhaps this is
why  it diesnt connect properly? 





######This is the error I get when I dial my isp

ppp ON atlantis> dial worldnet
Dial attempt 1 of 1
Phone: 2062339006
dial OK!
login OK!
ppp ON atlantis> Packet mode.
ppp ON atlantis> 
PPP ON atlantis> Error: SetIpDevice: ioctl(SIOCAIFADDR): Destination address required
Error: IpcpLayerUp: unable to set ip address
ppp ON atlantis>


######This is the end of my /var/log/ppp.log 

May 29 17:30:40 atlantis ppp[259]: tun0: LCP: LcpLayerUp
May 29 17:30:40 atlantis ppp[259]: tun0: Phase: NewPhase: Authenticate
May 29 17:30:40 atlantis ppp[259]: tun0: Phase:  his = CHAP, mine = none
May 29 17:30:40 atlantis ppp[259]: tun0: LCP: ChapInput: CHALLENGE
May 29 17:30:40 atlantis ppp[259]: tun0: LCP:  Valsize = 16, Name =
"seawa07ev!seawa15rs11pr004@els-an.att.net"
May 29 17:30:40 atlantis ppp[259]: tun0: LCP: ChapOutput: RESPONSE
May 29 17:30:40 atlantis ppp[259]: tun0: LCP: ChapInput: SUCCESS
May 29 17:30:40 atlantis ppp[259]: tun0: Phase: NewPhase: Network
May 29 17:30:40 atlantis ppp[259]: tun0: IPCP: State change Initial --> Closed
May 29 17:30:40 atlantis ppp[259]: tun0: IPCP: IPCP Up event!!
May 29 17:30:40 atlantis ppp[259]: tun0: IPCP: IpcpSendConfigReq
May 29 17:30:40 atlantis ppp[259]: tun0: IPCP:  IPADDR[6] 0.0.0.0
May 29 17:30:40 atlantis ppp[259]: tun0: IPCP:  COMPPROTO[6] 16 VJ slots with slot
compres
May 29 17:30:40 atlantis ppp[259]: tun0: IPCP: State change Closed --> Req-Sent
May 29 17:30:40 atlantis ppp[259]: tun0: CCP: State change Initial --> Closed
May 29 17:30:40 atlantis ppp[259]: tun0: CCP: CCP Up event!!   
May 29 17:30:40 atlantis ppp[259]: tun0: CCP: CcpSendConfigReq
May 29 17:30:40 atlantis ppp[259]: tun0: CCP:  DEFLATE[4] win 15
May 29 17:30:40 atlantis ppp[259]: tun0: CCP:  PRED1[2]
May 29 17:30:40 atlantis ppp[259]: tun0: CCP: State change Closed --> Req-Sent
May 29 17:30:40 atlantis ppp[259]: tun0: IPCP: Received Configure Request (37) state =
Req-Sent (6)
May 29 17:30:40 atlantis ppp[259]: tun0: IPCP:  IPADDR[6]  12.65.22.1
May 29 17:30:40 atlantis ppp[259]: tun0: IPCP:  COMPPROTO[6]  16 VJ slots with slot
compression
May 29 17:30:40 atlantis ppp[259]: tun0: IPCP: SendConfigNak(Req-Sent)
May 29 17:30:40 atlantis ppp[259]: tun0: IPCP:  IPADDR[6]  0.0.0.0
May 29 17:30:40 atlantis ppp[259]: tun0: IPCP: Received Configure Nak (1) state =
Req-Sent (6)
May 29 17:30:40 atlantis ppp[259]: tun0: IPCP:  IPADDR[6]  12.65.22.226
May 29 17:30:40 atlantis ppp[259]: tun0: IPCP:  IPADDR[6]  changing address: 0.0.0.0
--> 12.65.22.226
May 29 17:30:40 atlantis ppp[259]: tun0: IPCP: IpcpSendConfigReq
May 29 17:30:40 atlantis ppp[259]: tun0: IPCP:  IPADDR[6] 12.65.22.226
May 29 17:30:40 atlantis ppp[259]: tun0: IPCP:  COMPPROTO[6] 16 VJ slots with slot
compres
May 29 17:30:40 atlantis ppp[259]: tun0: LCP: Received Protocol Reject (7) state =
Opened (9)
May 29 17:30:40 atlantis ppp[259]: tun0: LCP: -- Protocol (80fd) was rejected.
May 29 17:30:40 atlantis ppp[259]: tun0: CCP: CcpLayerFinish.
May 29 17:30:40 atlantis ppp[259]: tun0: CCP: State change Req-Sent --> Stopped
May 29 17:30:40 atlantis ppp[259]: tun0: IPCP: Received Configure Request (40) state =
Req-Sent (6)
May 29 17:30:40 atlantis ppp[259]: tun0: IPCP:  COMPPROTO[6]  16 VJ slots with slot
compression
May 29 17:30:40 atlantis ppp[259]: tun0: IPCP: SendConfigAck(Req-Sent)
May 29 17:30:40 atlantis ppp[259]: tun0: IPCP:  COMPPROTO[6]  16 VJ slots with slot
compression
May 29 17:30:40 atlantis ppp[259]: tun0: IPCP: State change Req-Sent --> Ack-Sent
May 29 17:30:41 atlantis ppp[259]: tun0: IPCP: Received Configure Ack (2) state =
Ack-Sent (8)
May 29 17:30:41 atlantis ppp[259]: tun0: IPCP: State change Ack-Sent --> Opened
May 29 17:30:41 atlantis ppp[259]: tun0: IPCP: IpcpLayerUp(9).
May 29 17:30:41 atlantis ppp[259]: tun0: IPCP:  myaddr = 12.65.22.226  hisaddr =
0.0.0.0
May 29 17:30:41 atlantis ppp[259]: tun0: Error: SetIpDevice: ioctl(SIOCAIFADDR):
Destination address required
May 29 17:30:41 atlantis ppp[259]: tun0: Error: IpcpLayerUp: unable to set ip address
May 29 17:30:50 atlantis ppp[259]: tun0: Command: close
May 29 17:30:50 atlantis ppp[259]: tun0: Phase: NewPhase: Terminate
May 29 17:30:50 atlantis ppp[259]: tun0: LCP: LcpLayerDown
May 29 17:30:50 atlantis ppp[259]: tun0: LCP: SendTerminateReq.
May 29 17:30:50 atlantis ppp[259]: tun0: LCP: State change Opened --> Closing
May 29 17:30:50 atlantis ppp[259]: tun0: LCP: Received Terminate Ack (3) state =
Closing (4)
May 29 17:30:50 atlantis ppp[259]: tun0: LCP: State change Closing --> Closed
May 29 17:30:50 atlantis ppp[259]: tun0: LCP: LcpLayerFinish
May 29 17:30:51 atlantis ppp[259]: tun0: Phase: Modem: Connect time: 36 secs: 363
octets in, 314 octets out
May 29 17:30:51 atlantis ppp[259]: tun0: Phase:  total 18 bytes/sec
May 29 17:30:52 atlantis ppp[259]: tun0: Phase: NewPhase: Dead
May 29 17:32:30 atlantis ppp[259]: tun0: Command: ls
May 29 17:32:33 atlantis ppp[259]: tun0: Command: quit
May 29 17:32:34 atlantis ppp[259]: tun0: Phase: PPP Terminated (normal).


#######And finally here is my ppp.conf

default:
 set log Phase Chat Connect Carrier LCP IPCP CCP tun command
 set device /dev/cuaa0
 set speed 115200
 deny lqr
 set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" AT OK-AT-OK ATE1Q0 OK
\\dATDT\\T TIMEOUT 40 CONNECT"


#PAPorCHAPpmdemand:
worldnet:
 set phone 2062339006
 set login
 set authname XXXXXXXX@worldnet.att.net
 set authkey "XXXXXXXXXXXX"
 accept chap
# set openmode passive
 set timeout 120
 set ifaddr 0 0
 delete ALL
 add 0 0 HISADDR




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000001bd8c18$daf5fda0$7750410c>