Date: Mon, 4 Jan 1999 18:46:00 +0100 From: "Carlos Ruiz Moya" <cruiz@mf.euetib.upc.es> To: <AIC7xxx@FreeBSD.ORG> Subject: SCSI reset loop Message-ID: <000001be380a$1ae4c020$011e8280@Monter.house.es>
next in thread | raw e-mail | index | archive | help
Hi everyone: I use AHA2940UW width a HD Seagate ST-36530W (6.5GB)conected at 68 pins, and one Fujitsu MO 640 MB conected at 50 pins. Both ok instaled and its run ok under NT 4.0 WS. But when i tried to use a Linux Red-Hat 5.2 kernel 2.0.36 at boot time -every time at diferent phase of boot process after SCSI recognition device- appears this message: scsi: aborting command due to timeout (pid X) : pid 0, scsi0, channel 0, id2, lun0 host 0 abort (pid X) time out-reselling bus is being reset after 3 o 4 times of the reset loop run ok since the next reset loop. transfer rate of MO is syn negotiate at 5 mbps ond offset at 8. transfer rate of HD is syn negotiate at 10 mbps ond offset at 8. The maximum rate of HD is limited by BIOS setup (as recomended by SuSE in FAQ web Pages) But don't work on Red Hat. Prehaps because bios can't fix value below 10 mbps. Can someone help me? Tk To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe aic7xxx" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000001be380a$1ae4c020$011e8280>