Date: Tue, 25 Oct 2005 14:18:10 -0400 From: "Dave" <dmehler26@woh.rr.com> To: <freebsd-questions@freebsd.org> Subject: fatal trap 12 in kernel mode Message-ID: <000301c5d990$74df5ac0$0900a8c0@satellite>
next in thread | raw e-mail | index | archive | help
Hello,
I'm trying to do a 5.4-release install on an older box, it's an AT
motherboard, and i hope that's not my problem. I'm getting the below error
and would appreciate any help.
Thanks.
Dave.
Insert boot floppy and press Enter
/acpi.ko text=0x414fc data=0x1dc4+0x112c syms=[0x4+0x7670+0x4+0x9d05]
can't open '/boot/beastie.4th': inappropriate file type or format
/
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/kernel]...
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-RELEASE #0: Sun May 8 10:21:06 UTC 2005
root@harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD-K6(tm) 3D processor (450.17-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x58c Stepping = 12
Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
AMD Features=0x80000800<SYSCALL,3DNow!>
real memory = 268435456 (256 MB)
avail memory = 248946688 (237 MB)
K6-family MTRR support enabled (2 registers)
ACPI-0159: *** Error: AcpiLoadTables: Could not get RSDP,
AE_NO_ACPI_TABLES
ACPI-0213: *** Error: AcpiLoadTables: Could not load tables:
AE_NO_ACPI_TABL
ACPI-0213: *** Error: AcpiLoadTables: Could not load tables:
AE_NO_ACPI_TABLES
ACPI: table load failed: AE_NO_ACPI_TABLES
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
pcib0: <VIA 82C598MVP (Apollo MVP3) host bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 4 Entries> on motherboard
pci0: <PCI bus> on pcib0
agp0: <VIA 82C598 (Apollo MVP3) host to PCI bridge> mem
0xe0000000-0xe3ffffff at
agp0: <VIA 82C598 (Apollo MVP3) host to PCI bridge> mem
0xe0000000-0xe3ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C586B UDMA33 controller> port
0xe000-0xe00f,0x376,0x170-0x177,0x
atapci0: <VIA 82C586B UDMA33 controller> port
0xe000-0xe00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
rl0: <RealTek 8139 10/100BaseTX> port 0xe800-0xe8ff mem
0xe4000000-0xe40000ff ir
rl0: <RealTek 8139 10/100BaseTX> port 0xe800-0xe8ff mem
0xe4000000-0xe40000ff irq 10 at device 17.0 on pci0
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:08:54:00:f3:3b
ohci0: <NEC uPD 9210 USB controller> mem 0xe4001000-0xe4001fff irq 9 at
device 1
ohci0: <NEC uPD 9210 USB controller> mem 0xe4001000-0xe4001fff irq 9 at
device 18.0 on pci0
usb0: OHCI version 1.0
usb0: <NEC uPD 9210 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <NEC uPD 9210 USB controller> mem 0xe4002000-0xe4002fff irq 9 at
device 1
ohci1: <NEC uPD 9210 USB controller> mem 0xe4002000-0xe4002fff irq 9 at
device 18.1 on pci0
usb1: OHCI version 1.0
usb1: <NEC uPD 9210 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 18.2 (no driver attached)
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5 irq 6 drq 2 on isa0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
Timecounter "TSC" frequency 450165168 Hz quality 800
Timecounters tick every 10.000 msec
md0: Preloaded image </mfsroot> 4423680 bytes at 0xc0a34270
ad0: 9541MB <WDC WD100EB-00BHF0/15.15M15> [19386/16/63] at ata0-master
UDMA33
acd0: CDROM <ATAPI CDROM/V1.50> at ata1-slave PIO4
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0x1
fault code = supervisor write, page not present
instruction pointer = 0x8:0xc04b4e34
stack pointer = 0x10:0xcbf37c5c
frame pointer = 0x10:0xcbf37c64
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 4 (g_down)
trap number = 12
panic: page fault
Uptime: 3s
Cannot dump. No dump device defined.
Automatic reboot in 15 seconds - press a key on the console to abort
kernel trap 12 with interrupts disabled
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0x0
fault code = supervisor write, page not present
instruction pointer = 0x8:0xc05ebbcd
stack pointer = 0x10:0xcbf37a60
frame pointer = 0x10:0xcbf37a6c
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = resume, IOPL = 0
current process = 4 (g_down)
trap number = 12
panic: page fault
Uptime: 5s
Cannot dump. No dump device defined.
Automatic reboot in 15 seconds - press a key on the console to abort
--> Press a key on the console to reboot,
--> or switch off the system now.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000301c5d990$74df5ac0$0900a8c0>