Date: Mon, 24 Jul 2000 19:15:40 +0200 From: "GDB" <g-d-b@freegates.be> To: "Mark Ovens" <marko@freebsd.org> Cc: <questions@freebsd.org> Subject: Re: PPP / chat script problems: PART III: THE SEARCH FOR ... Message-ID: <000601bff592$cc37c2e0$071123d4@gdb> References: <000801bff4a0$4c3eec00$f70b23d4@gdb> <20000723135438.A236@parish> <000a01bff4b3$54b2f1c0$e30d23d4@gdb> <20000723191441.D236@parish>
next in thread | previous in thread | raw e-mail | index | archive | help
No, doesn't work, still "warning: chat script failed". I still have my 2 DNS
numbers, where do I have to put them?
ppp.conf:
default:
set device /dev/cuaa3
set speed 115200
set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" AT \
OK-AT-OK ATE1Q0 OK \\dATDT\\T TIMEOUT 40 CONNECT\\s115200"
provider:
set phone XXXXXXX
set authname XXXXXXX
set authkey XXXXXXX
set timeout 120
set ifaddr 10.0.0.1/0 0.0.0.0 255.255.255.0 0.0.0.0
enable dns
My ppp log file:
Jul 24 18:51:26 myname ppp[223]: Phase: Using interface: tun0
Jul 24 18:51:26 myname ppp[223]: Phase: deflink: Created in closed state
Jul 24 18:51:26 myname ppp[223]: Phase: PPP Started (interactive mode).
Jul 24 18:51:29 myname ppp[223]: Phase: bundle: Establish
Jul 24 18:51:29 myname ppp[223]: Phase: deflink: closed -> opening
Jul 24 18:51:29 myname ppp[223]: Phase: deflink: Connected!
Jul 24 18:51:29 myname ppp[223]: Phase: deflink: opening -> dial
Jul 24 18:51:29 myname ppp[223]: Phase: Phone: XXXXXXX
Jul 24 18:52:17 myname ppp[223]: Phase: deflink: dial -> hangup
Jul 24 18:52:17 myname ppp[223]: Phase: deflink: Disconnected!
Jul 24 18:52:17 myname ppp[223]: Phase: deflink: Connect time: 48 secs: 0
octets in, 0 octets out
Jul 24 18:52:17 myname ppp[223]: Phase: total 0 bytes/sec, peak 0 bytes/sec
on Mon Jul 24 18:52:17 2000
Jul 24 18:52:17 myname ppp[223]: Phase: deflink: hangup -> closed
Jul 24 18:52:17 myname ppp[223]: Phase: bundle: Dead
Jul 24 18:53:48 myname ppp[223]: Phase: PPP Terminated (normal).
Jul 24 18:53:50 myname ppp[224]: Phase: Using interface: tun0
Jul 24 18:53:50 myname ppp[224]: Phase: deflink: Created in closed state
Jul 24 18:53:50 myname ppp[224]: Phase: PPP Started (interactive mode).
Jul 24 18:54:23 myname ppp[224]: tun0: Command: /dev/tty: dial provider
Jul 24 18:54:23 myname ppp[224]: tun0: Command: provider: set phone
092700420
Jul 24 18:54:23 myname ppp[224]: tun0: Command: provider: set authname
XXXXXXXX
Jul 24 18:54:23 myname ppp[224]: tun0: Command: provider: set authkey
********
Jul 24 18:54:23 myname ppp[224]: tun0: Command: provider: set timeout 120
Jul 24 18:54:23 myname ppp[224]: tun0: Command: provider: set ifaddr
10.0.0.1/0 0.0.0.0 255.255.255.0 0.0.0.0
Jul 24 18:54:23 myname ppp[224]: tun0: Command: provider: enable dns
Jul 24 18:54:23 myname ppp[224]: tun0: Phase: bundle: Establish
Jul 24 18:54:23 myname ppp[224]: tun0: Phase: deflink: closed -> opening
Jul 24 18:54:23 myname ppp[224]: tun0: Phase: deflink: Connected!
Jul 24 18:54:23 myname ppp[224]: tun0: Phase: deflink: opening -> dial
Jul 24 18:54:23 myname ppp[224]: tun0: Phase: Phone: 092700420
Jul 24 18:54:23 myname ppp[224]: tun0: Chat: deflink: Dial attempt 1 of 1
Jul 24 18:54:23 myname ppp[224]: tun0: Chat: Send: AT^M
Jul 24 18:54:23 myname ppp[224]: tun0: Chat: Expect(5): OK
Jul 24 18:54:28 myname ppp[224]: tun0: Chat: Expect timeout
Jul 24 18:54:28 myname ppp[224]: tun0: Chat: Send: AT^M
Jul 24 18:54:28 myname ppp[224]: tun0: Chat: Expect(5): OK
Jul 24 18:54:28 myname ppp[224]: tun0: Chat: Received: AT^M^M
Jul 24 18:54:28 myname ppp[224]: tun0: Chat: Received: OK^M
Jul 24 18:54:28 myname ppp[224]: tun0: Chat: Send: ATE1Q0^M
Jul 24 18:54:28 myname ppp[224]: tun0: Chat: Expect(5): OK
Jul 24 18:54:28 myname ppp[224]: tun0: Chat: Received: AT^M^M
Jul 24 18:54:28 myname ppp[224]: tun0: Chat: Received: OK^M
Jul 24 18:54:28 myname ppp[224]: tun0: Chat: Send: ATDT092700420^M
Jul 24 18:54:30 myname ppp[224]: tun0: Chat: Expect(40): CONNECT 115200
Jul 24 18:54:30 myname ppp[224]: tun0: Chat: Received: ATE1Q0^M^M
Jul 24 18:55:11 myname ppp[224]: tun0: Chat: Expect timeout
Jul 24 18:55:11 myname ppp[224]: tun0: Phase: deflink: dial -> hangup
Jul 24 18:55:11 myname ppp[224]: tun0: Phase: deflink: Disconnected!
Jul 24 18:55:11 myname ppp[224]: tun0: Phase: deflink: Connect time: 48
secs: 0 octets in, 0 octets out
Jul 24 18:55:11 myname ppp[224]: tun0: Phase: total 0 bytes/sec, peak 0
bytes/sec on Mon Jul 24 18:55:11 2000
Jul 24 18:55:11 myname ppp[224]: tun0: Phase: deflink: hangup -> closed
Jul 24 18:55:11 myname ppp[224]: tun0: Phase: bundle: Dead
Any ideas? Meanwhile, I'm going to read the BSD handbook chapter "PPP"...
Thanks anyway...
----- Original Message -----
From: Mark Ovens <marko@freebsd.org>
To: GDB <g-d-b@freegates.be>
Cc: <questions@freebsd.org>
Sent: Sunday, July 23, 2000 8:14 PM
Subject: Re: PPP / chat script problems: PART II: A NEW BEGINNING
> On Sun, Jul 23, 2000 at 04:36:03PM +0200, GDB wrote:
> > Here's my ppp.conf script:
> >
> > default:
> > set device /dev/cuaa3
> > set speed 115200
> > set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" AT \
> > OK-AT-OK ATE1Q0 OK \\dATDT\\T TIMEOUT 40 CONNECT \"\""
> > provider
> > set phone "<my provider>"
> ^^^^^^^^^^^^^
>
> I take it that you really have a number here?
>
> > set login
>
> Remove/comment out this, unless your ISP requires a Unix-style
> login/password login (probably not).
>
> > set authname xxxxxxx
> > set authkey xxxxxxxx
> > set timeout 120
> > set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 # I think I
have
> ^^^^^^^^^^^^^
>
> 0.0.0.0
>
> > to change the first 2 by my ISP DNSs,
>
> this line is nothing to do with DNS, it's for using dynamic IP
> addresses. If your ISP gives you a static IP this line is totally
> wrong anyway.
>
> >
> > # right?
> > add default HISADDR
>
> Redundant, but harmless.
>
> > enable dns
> >
> > Then I do:
> > #ppp<enter>
> > dial provider<enter>
> > <modem dials number, I can hear it>
> > warning: chat script failed
>
> How long after the dialling finishes before this warning appears?
>
> > >quit<enter>
> > #
> >
> > That's all I did. I tried to connect to my ISP manually, but I have
> > difficulties typing in the username and password. After typing in "term"
in
> > ppp, the last character I typed does not appear on the screen. after
typing
> > in ATDT<number>, the following text appears when I hit <enter> once
more:
> > CONNECT 1520 (NOT 15200, really 1520) plus some other text, date and
> > time, when I type <enter> once again:
> >
>
> Uh. this sounds familiar, it's to do with local echoing (if we really
> need it I'll have to look it up). You shouldn't need to do this
> anyway, your ISP almost certainly uses PAP or CHAP so once we've got
> ppp.conf sorted this becomes academic.
>
> Try the above mods and if you still have problems add:
>
> set log chat command connect hdlc ipcp lcp phase tcp/ip tun
>
> to ppp.conf and see what appears in /var/log/ppp.log.
>
> BTW, I've added -questions back to the Cc:. You should always do this,
> not because I don't want to help, but because if I can't sort it out
> everyone else will see and there's a good chance someone else will
> jump in and help out.
>
> > User access verification<enter>
> > username:
> > password:
> >
> > These 3 lines do not appear in a nice way, only parts of it, I have to
type
> > <enter> a couple of times. So that makes it difficult to just type in my
> > name and password.
> >
> > NOTE 1: I prefer not to use unix-style login because in a couple of
months,
> > we are in the year 2001.
> > NOTE 2: I did not change anything else; I installed BSD and want
Internet
> > access ASAP before I do anything else.
> >
> >
> >
> >
> > ----- Original Message -----
> > From: Mark Ovens <marko@freebsd.org>
> > To: GDB <g-d-b@freegates.be>
> > Cc: <freebsd-questions@freebsd.org>
> > Sent: Sunday, July 23, 2000 2:54 PM
> > Subject: Re: PPP / chat script problems
> >
> >
> > > On Sun, Jul 23, 2000 at 02:19:48PM +0200, GDB wrote:
> > > > Hello,
> > > >
> > > > my problem: PPP always says "chat script failed"
> > > >
> > > > I have FreeBSD 3.2, a Rockwell 33.6 Fax Modem non-PnP. Everything
> > > > works fine under Windows 98. Under BSD my modem dials, so the modem
> > > > really works. It is the chat script which does not work. Can someone
> > > > give me some tips how to write a chat script which works fine for my
> > > > modem?
> > > >
> > >
> > > You will have to give us something to go on ;)
> > >
> > > Post your current /etc/ppp/ppp.conf. *Don't forget* to remove your
> > > authname and authkey before posting!
> > >
> > > >
> > > >
> > > >
> > >
> > > --
> > > If I buy a copy of WinDelete, and it doesn't delete Windows,
> > > am I entitled to my money back?
> > > ________________________________________________________________
> > > FreeBSD - The Power To Serve http://www.freebsd.org
> > > My Webpage http://ukug.uk.freebsd.org/~mark/
> > > mailto:marko@freebsd.org http://www.radan.com
> > >
> > >
> >
>
> --
> If I buy a copy of WinDelete, and it doesn't delete Windows,
> am I entitled to my money back?
> ________________________________________________________________
> FreeBSD - The Power To Serve http://www.freebsd.org
> My Webpage http://ukug.uk.freebsd.org/~mark/
> mailto:marko@freebsd.org http://www.radan.com
>
>
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000601bff592$cc37c2e0$071123d4>