Date: Tue, 27 Jun 2000 08:48:45 +1000 From: Danny <dannyh@idx.com.au> To: freebsd-questions@freebsd.org Subject: Zip Drive Problems --help Message-ID: <00062708503000.00370@dannyh.freebsd.org>
next in thread | raw e-mail | index | archive | help
--Hello I am trying to get the zip drive to work on my samba box.
-The FreeBSD version is
$ uname -a
FreeBSD backup.freebsd.org 3.3-RELEASE FreeBSD 3.3-RELEASE #0:
Thu Sep 16 23:40:35 GMT 1999
jkh@highwing.cdrom.com:/usr/src/sys/compile/GENERIC i386
- The output of dmesg is attached in this email
- I have plugged my ZIP drive to the parallel port on the Samba box
Question
1) What exactly do I do in the GNERIC kernel file to get the zip drive working
2) What exactly do I do in /dev to get my ZIP drive working
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.3-RELEASE #0: Thu Sep 16 23:40:35 GMT 1999
jkh@highwing.cdrom.com:/usr/src/sys/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: Cyrix 6x86MX (200.46-MHz 686-class CPU)
Origin = "CyrixInstead" Id = 0x600 Stepping = 0 DIR=0x0853
Features=0x80a135<FPU,DE,TSC,MSR,CX8,PGE,CMOV,MMX>
real memory = 32505856 (31744K bytes)
avail memory = 28217344 (27556K bytes)
Preloaded elf kernel "kernel" at 0xc0379000.
Probing for devices on PCI bus 0:
chip0: <Host to PCI bridge (vendor=1039 device=5597)> rev 0x02 on pci0.0.0
chip1: <SiS 85c503> rev 0x01 on pci0.1.0
ide_pci0: <PCI IDE controller (busmaster capable)> rev 0xd0 int a irq 0 on pci0.1.1
ed1: <NE2000 PCI Ethernet (RealTek 8029)> rev 0x00 int a irq 11 on pci0.15.0
ed1: address 00:00:e8:61:d7:f6, type NE2000 (16 bit)
vga0: <SiS model 0200 VGA-compatible display device> rev 0x65 int a irq 0 on pci0.20.0
Probing for PnP devices:
CSN 1 Vendor ID: CMI0001 [0x0100a90d] Serial 0x01000100 Comp ID: @@@0000 [0x00000000]
Probing for devices on the ISA bus:
sc0 on isa
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 not found at 0x280
fe0 not found at 0x300
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
psm0 not found
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fd0: 1.44MB 3.5in
wdc0 not found at 0x1f0
wdc1 at 0x170-0x177 irq 15 on isa
wdc1: unit 0 (wd2): <ST34321A>
wd2: 4103MB (8404830 sectors), 8894 cyls, 15 heads, 63 S/T, 512 B/S
wdc1: unit 1 (atapi): <ATAPI CD-ROM DRIVE 32X MAXIMUM/323P>, removable, dma, iordis
acd0: drive speed 4687KB/sec, 120KB cache
acd0: supported read types: CD-R, CD-RW, CD-DA
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: no/blank disc inside, unlocked
wt0 not found at 0x300
mcd0 not found at 0x300
matcdc0 not found at 0x230
scd0 not found at 0x230
ppc0 at 0x378 irq 7 flags 0x40 on isa
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
plip0: <PLIP network interface> on ppbus 0
ie0: unknown board_id: f000
ie0 not found at 0x300
ep0 not found at 0x300
ex0 not found
le0 not found at 0x300
lnc0 not found at 0x280
cs0 not found at 0x300
ze0 not found at 0x300
zp0 not found at 0x300
adv0 not found at 0x330
bt0 not found at 0x134
aha0 not found at 0x134
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
npx0 on motherboard
npx0: INT 16 interface
changing root device to wd2s1a
----------------------------------------------------------------
You are not authorized to use my email address for any purpose.
This is a violation of my privacy. Remove my email
address from your databases immediately.
----------------------------------------------------------------
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?00062708503000.00370>