Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 10 Mar 1998 11:47:23 -0600
From:      "=?iso-8859-1?B?SOljdG9yIEh1Z28gU29s7XMgR29ueuFsZXo=?=" <hsolis@cfe.gob.mx>
To:        <questions@FreeBSD.ORG>
Subject:   Some problems...
Message-ID:  <000b01bd4c4c$a4412480$0c009984@hsolis>

next in thread | raw e-mail | index | archive | help

[-- Attachment #1 --]


[-- Attachment #2 --]
#
# GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks
#
# For more information read the handbook part System Administration -> 
# Configuring the FreeBSD Kernel -> The Configuration File. 
# The handbook is available in /usr/share/doc/handbook or online as
# latest version from the FreeBSD World Wide Web server 
# <URL:http://www.FreeBSD.ORG/>;
#
# An exhaustive list of options and more detailed explanations of the 
# device lines is present in the ./LINT configuration file. If you are 
# in doubt as to the purpose or necessity of a line, check first in LINT.
#
#	$Id: GENERIC,v 1.77.2.12 1997/10/18 11:03:10 joerg Exp $

machine		"i386"
cpu		"I586_CPU"
ident		PLANEACION
maxusers	16

options		INET			#InterNETworking
options		FFS			#Berkeley Fast Filesystem
options		NFS			#Network Filesystem
options		MSDOSFS			#MSDOS Filesystem
options		"CD9660"		#ISO 9660 Filesystem
options		PROCFS			#Process filesystem
options		"COMPAT_43"		#Compatible with BSD 4.3 [KEEP THIS!]
options		SCSI_DELAY=15		#Be pessimistic about Joe SCSI device
options		BOUNCE_BUFFERS		#include support for DMA bounce buffers
options		UCONSOLE		#Allow users to grab the console
options		FAILSAFE		#Be conservative
options		USERCONFIG		#boot -c editor
options		VISUAL_USERCONFIG	#visual boot -c editor

config		kernel	root on sd0

controller	isa0
controller	eisa0

controller	fdc0	at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr
disk		fd0	at fdc0 drive 0

options		"CMD640"	# work around CMD640 chip deficiency

options		ATAPI		#Enable ATAPI support for IDE bus
options		ATAPI_STATIC	#Don't do it as an LKM
device		wcd0	#IDE CD-ROM

# A single entry for any of these controllers (ncr, ahb, ahc, amd) is
# sufficient for any number of installed devices.
controller	ahc0

device		sd0

device		od0	#See LINT for possible `od' options.

device		st0

# syscons is the default console driver, resembling an SCO console
device		sc0	at isa? port "IO_KBD" tty irq 1 vector scintr
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device		vt0	at isa? port "IO_KBD" tty irq 1 vector pcrint
#options		XSERVER			# support for X server
#options		FAT_CURSOR		# start with block cursor
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
#options		PCVT_SCANSET=2		# IBM keyboards are non-std

# Mandatory, don't remove
device		npx0	at isa? port "IO_NPX" flags 0x1 irq 13 vector npxintr

#
# Laptop support (see LINT for more options)
#
#device		apm0    at isa?	disable	# Advanced Power Management
#options		APM_BROKEN_STATCLOCK	# Workaround some buggy APM BIOS
# PCCARD (PCMCIA) support
#controller	crd0
#device		pcic0	at crd?
#device		pcic1	at crd?

device		sio0	at isa? port "IO_COM1" tty irq 4 vector siointr
device		sio1	at isa? port "IO_COM2" tty irq 3 vector siointr

device		lpt0	at isa? port? tty irq 7 vector lptintr

device		psm0	at isa? disable port "IO_KBD" conflicts tty irq 12 vector psmintr

# Order is important here due to intrusive probes, do *not* alphabetize
# this list of network interfaces until the probes have been fixed.
# Right now it appears that the ie0 must be probed before ep0. See
# revision 1.20 of this file.

device ed0 at isa? port 0x280 net irq  5 iomem 0xd8000 vector edintr

device ep0 at isa? port 0x340 net irq 10 vector epintr

pseudo-device	loop
pseudo-device	ether
pseudo-device	log
# ijppp uses tun instead of ppp device
#pseudo-device	ppp	1
pseudo-device	vn	1
pseudo-device	tun	1
pseudo-device	pty	16
pseudo-device	gzip		# Exec gzipped a.out's

# KTRACE enables the system-call tracing facility ktrace(2).
# This adds 4 KB bloat to your kernel, and slightly increases
# the costs of each syscall.
options		KTRACE		#kernel tracing

# This provides support for System V shared memory.
#
options         SYSVSHM

Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000b01bd4c4c$a4412480$0c009984>