Date: Thu, 6 Nov 2003 12:32:31 +0200 From: "Technoservice" <technoservice@mail.lviv.ua> To: <freebsd-scsi@freebsd.org> Subject: problem with target mode Message-ID: <000b01c3a451$7f1bf230$0100000a@server>
next in thread | raw e-mail | index | archive | help
Hi, I have two AHA-2940UW cards on two different machines respectively. I named them TARGET_COMP and INITIATOR_COMP. They are connected by an internal 50-pin SCSI cable. On TARGET_COMP machine is FreeBSD 5.1. When I triggered the target mode operation on the TARGET_COMP machine, then is messages: "Configuring TARGET Mode (noperiph:ahc0:0:5:0): Lun now enable for TARGET_COMP mode" When I rescans the bus from the INITIATOR_COMP machine (when machine is starting), it found nothing. On the one way, the INITIATOR_COMP did select the target mode controller, but it got no response and returned with time out message. On the other way, the TARGET_COMP controller didn't capture any select request. On the other way, the INITIATOR_COMP did select the TARGET_COMP mode controller, but it got no response and returned message: "Improper termination or faulty cable detected. Please rectify". In this time on TARGET_COMP machine is message: "Someone reset channel A". This is not a cabling or termination problem. (I connected HDD to both AHA-2940UW cards and it work properly.) Help me, please. Thanks, Vladyka Igor
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000b01c3a451$7f1bf230$0100000a>