Date: Sun, 9 Jul 2006 04:02:12 +0100 From: "Steven Hartland" <killing@multiplay.co.uk> To: "Steven Hartland" <killing@multiplay.co.uk>, <freebsd-hackers@freebsd.org> Subject: Re: 6.1 kernel panic Message-ID: <000b01c6a304$1797aa50$b3db87d4@multiplay.co.uk> References: <000f01c6a2fd$51da1470$b3db87d4@multiplay.co.uk>
next in thread | previous in thread | raw e-mail | index | archive | help
Dmesg for machine:
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.1-RELEASE-p3 #0: Sun Jul 9 03:55:57 UTC 2006
ACPI APIC Table: <VIA694 AWRDACPI>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) III CPU family 1266MHz (1266.06-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 2147418112 (2047 MB)
avail memory = 2100658176 (2003 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 1.1> irqs 0-23 on motherboard
acpi0: <VIA694 AWRDACPI> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff,0x4000-0x407f,0x4080-0x40ff,0x5000-0x500f on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
fxp0: <Intel 82550 Pro/100 Ethernet> port 0xa000-0xa03f mem 0xf8141000-0xf8141fff,0xf8100000-0xf811ffff irq 18 at device 8.0 on
pci0
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:02:b3:a2:e8:bd
atapci0: <Promise PDC20267 UDMA100 controller> port 0xa400-0xa407,0xa800-0xa803,0xac00-0xac07,0xb000-0xb003,0xb400-0xb43f mem
0xf8120000-0xf813ffff irq 18 at device 12.0 on pci0
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
fxp1: <Intel 82559 Pro/100 Ethernet> port 0xb800-0xb83f mem 0xf8140000-0xf8140fff,0xf8000000-0xf80fffff irq 19 at device 13.0 on
pci0
miibus1: <MII bus> on fxp1
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: Ethernet address: 00:30:48:41:53:f9
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <VIA 8233 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xbc00-0xbc0f at device 17.1 on pci0
ata0: <ATA channel 0> on atapci1
ata1: <ATA channel 1> on atapci1
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xcc000-0xd67ff,0xd7000-0xdefff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
Timecounters tick every 5.000 msec
ad4: 114473MB <WDC WD1200JB-00EVA0 15.05R15> at ata2-master UDMA100
ad5: 114473MB <WDC WD1200JB-00DUA3 75.13B75> at ata2-slave UDMA100
ad6: 114473MB <WDC WD1200JB-00GVA0 08.02D08> at ata3-master UDMA100
ad7: 114473MB <WDC WD1200JB-00GVA0 08.02D08> at ata3-slave UDMA100
ar0: 228946MB <Promise Fasttrak RAID0+1 (stripe 64 KB)> status: READY
ar0: disk0 READY (master) using ad4 at ata2-master
ar0: disk1 READY (master) using ad5 at ata2-slave
ar0: disk2 READY (mirror) using ad6 at ata3-master
ar0: disk3 READY (mirror) using ad7 at ata3-slave
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ar0s1a
N.B. Kernel that panic'ed was a pure 6.1-RELEASE SMP I've just
patched it -p3 to be sure.
Steve
================================================
This e.mail is private and confidential between Multiplay (UK) Ltd. and the person or entity to whom it is addressed. In the event of misdirection, the recipient is prohibited from using, copying, printing or otherwise disseminating it or any information contained in it.
In the event of misdirection, illegible or incomplete transmission please telephone +44 845 868 1337
or return the E.mail to postmaster@multiplay.co.uk.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000b01c6a304$1797aa50$b3db87d4>