Date: Tue, 16 May 2006 01:04:04 +0200 From: "OxY" <oxy@field.hu> To: <freebsd-net@freebsd.org> Subject: changing default route Message-ID: <000c01c67873$dc8a9680$0201a8c0@oxy>
next in thread | raw e-mail | index | archive | help
hi!
i have a little irregular problem with default route..
here are the details:
have two interfaces with the same ip, em0 connected to another server with crosslink,
em1 is the public, can be reached from the internet connected to a switch.
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=b<RXCSUM,TXCSUM,VLAN_MTU>
inet 195.38.96.13 netmask 0xffffffc0 broadcast 195.38.96.127
ether 00:13:d4:46:ae:91
media: Ethernet autoselect (1000baseTX <full-duplex>)
status: active
em1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=b<RXCSUM,TXCSUM,VLAN_MTU>
inet 195.38.96.13 netmask 0xffffffc0 broadcast 195.38.96.127
ether 00:0e:0c:a2:ac:42
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
in rc.conf i have:
defaultrouter="195.38.96.65"
ifconfig_em0="inet 195.38.96.89 netmask 255.255.255.192"
ifconfig_em1="inet 195.38.96.89 netmask 255.255.255.192"
with these the OS puts the default route to em0, however i want to communicate with the world on em1 and
use em0 to connect to the other server on lan..
default gateway. UGS 0 8065787 em0 <----need em1 here
i can't change ip, it must be the same on both interfaces..
how can i change the interface for defaultroute?
thank you for help!
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000c01c67873$dc8a9680$0201a8c0>