Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 30 Nov 2002 03:13:00 -0600
From:      "Lewis Watson" <lists@visionsix.com>
To:        "Martin Stiemerling" <Martin.Stiemerling@ccrle.nec.de>
Cc:        "freebsd-net" <freebsd-net@FreeBSD.ORG>
Subject:   Re: FreeBSD Gateway Question / Problem
Message-ID:  <000e01c29850$ae535e20$a977ca41@yogi>
References:  <005d01c297dc$6939f340$a977ca41@yogi> <3DE8745D.8030201@ccrle.nec.de>

next in thread | previous in thread | raw e-mail | index | archive | help
Hi Martin,
I have to agree with your logic but I have double checked and they point to
the same default gateway as the other machines on the old network. I went
ahead and did a route add for each linux machine (there were three) now they
can find the new network as if nothing was wrong. I am still just really
confused about it. Maybe they have to have a static route entered even
though the router for the old network knows where the new network is.... I
have tried every host over the Internet and all seem to find the new network
hosts ok.... See below for a simple layout....

Internet --- Old Network --- New Network
                          |
                          |
                Another Network


Anyways, Any other ideas?
Thank you for your time and thoghts,
Lewis


----- Original Message -----
From: "Martin Stiemerling" <Martin.Stiemerling@ccrle.nec.de>
To: "Lewis Watson" <lists@visionsix.com>
Cc: "freebsd-net" <freebsd-net@FreeBSD.ORG>
Sent: Saturday, November 30, 2002 2:18 AM
Subject: Re: FreeBSD Gateway Question / Problem


> Hi Lewis,
>
> sounds like your linux computers on your old network have a wrong
> routing entry. If you can reach any other machine (bsd to windows,
> windows to bsd, ...) the linux perhaps have a wrong default gateway.
>
> Martin
>
> Lewis Watson wrote:
> > Hello,
> > I am currently trying to add another /24 network to my existing network
with
> > a FreeBSD machine as the gateway to it. Currently, I have a /24 network
> > connected to the Internet w/ a cisco router. I have specified to the
cisco
> > router that the new /24 network is connected to 192.168.0.14, which is
the
> > external ip address of the bsd gateway machine. The internal ip address
for
> > that machine is 192.168.1.1. which is what I have specified to all
systems
> > on
> > the new network as the gateway.
> >
> > I thought I had everything exactly the way it should be, except that
> > specifically my Linux machines on the old network cannot find the new
> > network at all. My windows machines on the old network can find the new
> > network. The bsd machines on the old network can find the new network.
Other
> > non-Linux machines on the Internet can find the new network. The
machines on
> > the new network can find everything but the linux machines on the old
> > network. It appears that only Linux machines cannot figure out where the
new
> > network is and I am not so sure that I have set up the bsd gateway
properly.
> > Its only one static route that has to be added so I think that routed
and
> > certainly gated is overkill.
> >
> > Please tell me what I need other than to specify enable_gateway="YES". I
> > have tried enable_firewall="YES" and set it to "open" but yet I still am
> > having these problems. What do I need to add here to get this going?
> > Thanks.
> > Lewis
> >
> >
> > To Unsubscribe: send mail to majordomo@FreeBSD.org
> > with "unsubscribe freebsd-net" in the body of the message
>
>
>
> --
> Martin Stiemerling
>
> NEC Europe Ltd. -- Network Laboratories  Stiemerling@ccrle.nec.de
> IPv4: http://www.ccrle.nec.de  IPv6: http://www.ipv6.ccrle.nec.de
>


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-net" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000e01c29850$ae535e20$a977ca41>