Date: Sun, 13 May 2007 02:50:28 +0800 From: "Sudirman Ahmad" <amp@mybsd.org.my> To: <freebsd-acpi@FreeBSD.org> Cc: amp@mybsd.org.my Subject: ACPI problem on Acer Aspire 5570 (5572 NWXCi) Message-ID: <001001c794c6$6abb1730$0401a8c0@sudirman073545>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
------=_NextPart_000_000D_01C79509.76F59A00
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
reply-type=original
Content-Transfer-Encoding: 7bit
Dear list,
FYI I could not sent a acpidump file due it was more than 200kb.
----- Original Message -----
To: <freebsd-acpi@FreeBSD.org>
Cc: <amp@mybsd.org.my>
Sent: Saturday, 12 May, 2007 11:15 AM
Subject: ACPI problem on Acer Aspire 5570 (5572 NWXCi)
> Hello list,
>
> I'm having a problem or confict with acpi on my acer laptop especially
> with
> my NIC even when i plugged in a pcmcia NIC card. The FreeBSD-STABLE branch
> that I'm using is latest cvs-up last night.
> Attached is the necessary information for my system.
>
>
>
>
> ps: please do cc me as i'm not subscribe to this list.
>
------=_NextPart_000_000D_01C79509.76F59A00
Content-Type: text/plain; format=flowed; name="with_acpi.txt";
reply-type=original
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
filename="with_acpi.txt"
Copyright (c) 1992-2007 The FreeBSD Project.=0A=
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994=0A=
The Regents of the University of California. All rights reserved.=0A=
FreeBSD is a registered trademark of The FreeBSD Foundation.=0A=
FreeBSD 6.2-STABLE #0: Sat May 12 02:28:07 MYT 2007=0A=
root@:/usr/obj/usr/src/sys/GENERIC=0A=
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0b7a000.=0A=
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0b7a25c.=0A=
MP Configuration Table version 1.4 found at 0xc009e571=0A=
Table 'FACP' at 0x7f69ada0=0A=
Table 'APIC' at 0x7f69ae94=0A=
MADT: Found table at 0x7f69ae94=0A=
APIC: Using the MADT enumerator.=0A=
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled=0A=
MADT: Found CPU APIC ID 1 ACPI ID 1: enabled=0A=
ACPI APIC Table: <INTEL CALISTGA>=0A=
Calibrating clock(s) ... i8254 clock: 1193203 Hz=0A=
CLK_USE_I8254_CALIBRATION not specified - using default frequency=0A=
Timecounter "i8254" frequency 1193182 Hz quality 0=0A=
Calibrating TSC clock ... TSC clock: 1666791270 Hz=0A=
CPU: Genuine Intel(R) CPU T2300 @ 1.66GHz (1666.79-MHz =
686-class CPU)=0A=
Origin =3D "GenuineIntel" Id =3D 0x6e8 Stepping =3D 8=0A=
=
Features=3D0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG=
E,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>=0A=
Features2=3D0xc189<SSE3,MON,EST,TM2,<b14>,<b15>>=0A=
AMD Features=3D0x100000<NX>=0A=
Cores per package: 2=0A=
real memory =3D 2137587712 (2038 MB)=0A=
Physical memory chunk(s):=0A=
0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages)=0A=
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)=0A=
0x0000000000c25000 - 0x000000007d269fff, 2086948864 bytes (509509 pages)=0A=
avail memory =3D 2086797312 (1990 MB)=0A=
bios32: Found BIOS32 Service Directory header at 0xc00f6610=0A=
bios32: Entry =3D 0xfd460 (c00fd460) Rev =3D 0 Len =3D 1=0A=
pcibios: PCI BIOS entry at 0xfd460+0x262=0A=
pnpbios: Found PnP BIOS data at 0xc00f66b0=0A=
pnpbios: Entry =3D f0000:acc3 Rev =3D 1.0=0A=
Other BIOS signatures found:=0A=
APIC: CPU 0 has ACPI ID 0=0A=
MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000=0A=
ioapic0: Changing APIC ID to 1=0A=
ioapic0: Routing external 8259A's -> intpin 0=0A=
MADT: Interrupt override: source 0, irq 2=0A=
ioapic0: Routing IRQ 0 -> intpin 2=0A=
MADT: Interrupt override: source 9, irq 9=0A=
ioapic0: intpin 9 trigger: level=0A=
lapic0: Routing NMI -> LINT1=0A=
lapic0: LINT1 trigger: edge=0A=
lapic0: LINT1 polarity: high=0A=
lapic1: Routing NMI -> LINT1=0A=
lapic1: LINT1 trigger: edge=0A=
lapic1: LINT1 polarity: high=0A=
ioapic0 <Version 2.0> irqs 0-23 on motherboard=0A=
cpu0 BSP:=0A=
ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff=0A=
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff=0A=
timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000=0A=
wlan: <802.11 Link Layer>=0A=
ath_rate: version 1.2 <SampleRate bit-rate selection algorithm>=0A=
null: <null device, zero device>=0A=
random: <entropy source, Software, Yarrow>=0A=
nfslock: pseudo-device=0A=
io: <I/O>=0A=
kbd: new array size 4=0A=
kbd1 at kbdmux0=0A=
mem: <memory>=0A=
Pentium Pro MTRR support enabled=0A=
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, =
RF5413)=0A=
rr232x: RocketRAID 232x controller driver v1.02 (May 12 2007 02:27:55)=0A=
npx0: INT 16 interface=0A=
acpi0: <PTLTD XSDT> on motherboard=0A=
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48=0A=
acpi0: [MPSAFE]=0A=
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000fa20=0A=
pci_open(1a): mode1res=3D0x80000000 (0x80000000)=0A=
pci_cfgcheck: device 0 [class=3D060000] [hdr=3D00] is there =
(id=3D27a08086)=0A=
pcibios: BIOS version 2.10=0A=
acpi_bus_number: root bus has no _BBN, assuming 0=0A=
acpi_bus_number: can't get _ADR=0A=
acpi_bus_number: can't get _ADR=0A=
AcpiOsDerivePciId: bus 0 dev 0 func 0=0A=
acpi_bus_number: root bus has no _BBN, assuming 0=0A=
acpi_bus_number: can't get _ADR=0A=
acpi_bus_number: can't get _ADR=0A=
AcpiOsDerivePciId: bus 0 dev 28 func 3=0A=
acpi_bus_number: root bus has no _BBN, assuming 0=0A=
acpi_bus_number: can't get _ADR=0A=
acpi_bus_number: can't get _ADR=0A=
AcpiOsDerivePciId: bus 0 dev 31 func 0=0A=
acpi0: Power Button (fixed)=0A=
acpi0: wakeup code va 0xda335000 pa 0x9d000=0A=
unknown: I/O range not supported=0A=
acpi_hpet0: vend: 0x8086 rev: 0x1 num: 1 hz: 14318180 opts: leg_route =
count_size=0A=
Timecounter "HPET" frequency 14318180 Hz quality 2000=0A=
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10=0A=
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000=0A=
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0=0A=
acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0=0A=
pci_link0: Index IRQ Rtd Ref IRQs=0A=
Initial Probe 0 11 N 0 1 3 4 5 6 7 10 12 14 15=0A=
Validation 0 255 N 0 1 3 4 5 6 7 10 12 14 15=0A=
After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15=0A=
pci_link1: Index IRQ Rtd Ref IRQs=0A=
Initial Probe 0 11 N 0 1 3 4 5 6 7 11 12 14 15=0A=
Validation 0 11 N 0 1 3 4 5 6 7 11 12 14 15=0A=
After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15=0A=
pci_link2: Index IRQ Rtd Ref IRQs=0A=
Initial Probe 0 10 N 0 1 3 4 5 6 7 10 12 14 15=0A=
Validation 0 10 N 0 1 3 4 5 6 7 10 12 14 15=0A=
After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15=0A=
pci_link3: Index IRQ Rtd Ref IRQs=0A=
Initial Probe 0 10 N 0 1 3 4 5 6 7 11 12 14 15=0A=
Validation 0 255 N 0 1 3 4 5 6 7 11 12 14 15=0A=
After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15=0A=
pci_link4: Index IRQ Rtd Ref IRQs=0A=
Initial Probe 0 10 N 0 1 3 4 5 6 7 10 12 14 15=0A=
Validation 0 10 N 0 1 3 4 5 6 7 10 12 14 15=0A=
After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15=0A=
pci_link5: Index IRQ Rtd Ref IRQs=0A=
Initial Probe 0 11 N 0 1 3 4 5 6 7 11 12 14 15=0A=
Validation 0 11 N 0 1 3 4 5 6 7 11 12 14 15=0A=
After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15=0A=
pci_link6: Index IRQ Rtd Ref IRQs=0A=
Initial Probe 0 10 N 0 1 3 4 5 6 7 10 12 14 15=0A=
Validation 0 10 N 0 1 3 4 5 6 7 10 12 14 15=0A=
After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15=0A=
pci_link7: Index IRQ Rtd Ref IRQs=0A=
Initial Probe 0 11 N 0 1 3 4 5 6 7 11 12 14 15=0A=
Validation 0 11 N 0 1 3 4 5 6 7 11 12 14 15=0A=
After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15=0A=
cpu0: <ACPI CPU> on acpi0=0A=
acpi_throttle0: <ACPI CPU Throttling> on cpu0=0A=
acpi_throttle0: P_CNT from P_BLK 0x1010=0A=
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0=0A=
pci0: <ACPI PCI bus> on pcib0=0A=
pci0: physical bus=3D0=0A=
found-> vendor=3D0x8086, dev=3D0x27a0, revid=3D0x03=0A=
bus=3D0, slot=3D0, func=3D0=0A=
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0=0A=
cmdreg=3D0x0006, statreg=3D0x2090, cachelnsz=3D0 (dwords)=0A=
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0A=
found-> vendor=3D0x8086, dev=3D0x27a2, revid=3D0x03=0A=
bus=3D0, slot=3D2, func=3D0=0A=
class=3D03-00-00, hdrtype=3D0x00, mfdev=3D1=0A=
cmdreg=3D0x0007, statreg=3D0x0090, cachelnsz=3D0 (dwords)=0A=
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0A=
intpin=3Da, irq=3D11=0A=
powerspec 2 supports D0 D3 current D0=0A=
MSI supports 1 message=0A=
map[10]: type 1, range 32, base d0300000, size 19, enabled=0A=
map[14]: type 4, range 32, base 00001800, size 3, enabled=0A=
map[18]: type 3, range 32, base c0000000, size 28, enabled=0A=
map[1c]: type 1, range 32, base d0400000, size 18, enabled=0A=
pcib0: matched entry for 0.2.INTA=0A=
pcib0: slot 2 INTA hardwired to IRQ 16=0A=
found-> vendor=3D0x8086, dev=3D0x27a6, revid=3D0x03=0A=
bus=3D0, slot=3D2, func=3D1=0A=
class=3D03-80-00, hdrtype=3D0x00, mfdev=3D1=0A=
cmdreg=3D0x0007, statreg=3D0x0090, cachelnsz=3D0 (dwords)=0A=
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0A=
powerspec 2 supports D0 D3 current D0=0A=
map[10]: type 1, range 32, base d0380000, size 19, enabled=0A=
found-> vendor=3D0x8086, dev=3D0x27d8, revid=3D0x02=0A=
bus=3D0, slot=3D27, func=3D0=0A=
class=3D04-03-00, hdrtype=3D0x00, mfdev=3D0=0A=
cmdreg=3D0x0006, statreg=3D0x0010, cachelnsz=3D16 (dwords)=0A=
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0A=
intpin=3Da, irq=3D10=0A=
powerspec 2 supports D0 D3 current D0=0A=
MSI supports 1 message, 64 bit=0A=
map[10]: type 1, range 64, base d0440000, size 14, enabled=0A=
pcib0: matched entry for 0.27.INTA=0A=
pcib0: slot 27 INTA hardwired to IRQ 22=0A=
found-> vendor=3D0x8086, dev=3D0x27d0, revid=3D0x02=0A=
bus=3D0, slot=3D28, func=3D0=0A=
class=3D06-04-00, hdrtype=3D0x01, mfdev=3D1=0A=
cmdreg=3D0x0000, statreg=3D0x0010, cachelnsz=3D16 (dwords)=0A=
lattimer=3D0x00 (0 ns), mingnt=3D0x04 (1000 ns), maxlat=3D0x00 (0 ns)=0A=
intpin=3Da, irq=3D11=0A=
powerspec 2 supports D0 D3 current D0=0A=
MSI supports 1 message=0A=
pcib0: matched entry for 0.28.INTA=0A=
pcib0: slot 28 INTA hardwired to IRQ 16=0A=
found-> vendor=3D0x8086, dev=3D0x27d2, revid=3D0x02=0A=
bus=3D0, slot=3D28, func=3D1=0A=
class=3D06-04-00, hdrtype=3D0x01, mfdev=3D1=0A=
cmdreg=3D0x0000, statreg=3D0x0010, cachelnsz=3D16 (dwords)=0A=
lattimer=3D0x00 (0 ns), mingnt=3D0x04 (1000 ns), maxlat=3D0x00 (0 ns)=0A=
intpin=3Db, irq=3D11=0A=
powerspec 2 supports D0 D3 current D0=0A=
MSI supports 1 message=0A=
pcib0: matched entry for 0.28.INTB=0A=
pcib0: slot 28 INTB hardwired to IRQ 17=0A=
found-> vendor=3D0x8086, dev=3D0x27d4, revid=3D0x02=0A=
bus=3D0, slot=3D28, func=3D2=0A=
class=3D06-04-00, hdrtype=3D0x01, mfdev=3D1=0A=
cmdreg=3D0x0000, statreg=3D0x0010, cachelnsz=3D16 (dwords)=0A=
lattimer=3D0x00 (0 ns), mingnt=3D0x04 (1000 ns), maxlat=3D0x00 (0 ns)=0A=
intpin=3Dc, irq=3D10=0A=
powerspec 2 supports D0 D3 current D0=0A=
MSI supports 1 message=0A=
pcib0: matched entry for 0.28.INTC=0A=
pcib0: slot 28 INTC hardwired to IRQ 18=0A=
found-> vendor=3D0x8086, dev=3D0x27c8, revid=3D0x02=0A=
bus=3D0, slot=3D29, func=3D0=0A=
class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1=0A=
cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords)=0A=
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0A=
intpin=3Da, irq=3D11=0A=
map[20]: type 4, range 32, base 00001820, size 5, enabled=0A=
pcib0: matched entry for 0.29.INTA=0A=
pcib0: slot 29 INTA hardwired to IRQ 23=0A=
found-> vendor=3D0x8086, dev=3D0x27c9, revid=3D0x02=0A=
bus=3D0, slot=3D29, func=3D1=0A=
class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0=0A=
cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords)=0A=
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0A=
intpin=3Db, irq=3D10=0A=
map[20]: type 4, range 32, base 00001840, size 5, enabled=0A=
pcib0: matched entry for 0.29.INTB=0A=
pcib0: slot 29 INTB hardwired to IRQ 19=0A=
found-> vendor=3D0x8086, dev=3D0x27ca, revid=3D0x02=0A=
bus=3D0, slot=3D29, func=3D2=0A=
class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0=0A=
cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords)=0A=
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0A=
intpin=3Dc, irq=3D10=0A=
map[20]: type 4, range 32, base 00001860, size 5, enabled=0A=
pcib0: matched entry for 0.29.INTC=0A=
pcib0: slot 29 INTC hardwired to IRQ 18=0A=
found-> vendor=3D0x8086, dev=3D0x27cb, revid=3D0x02=0A=
bus=3D0, slot=3D29, func=3D3=0A=
class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0=0A=
cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords)=0A=
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0A=
intpin=3Dd, irq=3D11=0A=
map[20]: type 4, range 32, base 00001880, size 5, enabled=0A=
pcib0: matched entry for 0.29.INTD=0A=
pcib0: slot 29 INTD hardwired to IRQ 16=0A=
found-> vendor=3D0x8086, dev=3D0x27cc, revid=3D0x02=0A=
bus=3D0, slot=3D29, func=3D7=0A=
class=3D0c-03-20, hdrtype=3D0x00, mfdev=3D0=0A=
cmdreg=3D0x0006, statreg=3D0x0290, cachelnsz=3D0 (dwords)=0A=
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0A=
intpin=3Da, irq=3D11=0A=
powerspec 2 supports D0 D3 current D0=0A=
map[10]: type 1, range 32, base d0644000, size 10, enabled=0A=
pcib0: matched entry for 0.29.INTA=0A=
pcib0: slot 29 INTA hardwired to IRQ 23=0A=
found-> vendor=3D0x8086, dev=3D0x2448, revid=3D0xe2=0A=
bus=3D0, slot=3D30, func=3D0=0A=
class=3D06-04-01, hdrtype=3D0x01, mfdev=3D0=0A=
cmdreg=3D0x0004, statreg=3D0x0010, cachelnsz=3D0 (dwords)=0A=
lattimer=3D0x00 (0 ns), mingnt=3D0x04 (1000 ns), maxlat=3D0x00 (0 ns)=0A=
found-> vendor=3D0x8086, dev=3D0x27b9, revid=3D0x02=0A=
bus=3D0, slot=3D31, func=3D0=0A=
class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1=0A=
cmdreg=3D0x0007, statreg=3D0x0210, cachelnsz=3D0 (dwords)=0A=
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0A=
found-> vendor=3D0x8086, dev=3D0x27c4, revid=3D0x02=0A=
bus=3D0, slot=3D31, func=3D2=0A=
class=3D01-01-80, hdrtype=3D0x00, mfdev=3D0=0A=
cmdreg=3D0x0005, statreg=3D0x02b0, cachelnsz=3D0 (dwords)=0A=
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0A=
intpin=3Db, irq=3D255=0A=
powerspec 2 supports D0 D3 current D0=0A=
map[20]: type 4, range 32, base 000018b0, size 4, enabled=0A=
found-> vendor=3D0x8086, dev=3D0x27da, revid=3D0x02=0A=
bus=3D0, slot=3D31, func=3D3=0A=
class=3D0c-05-00, hdrtype=3D0x00, mfdev=3D0=0A=
cmdreg=3D0x0001, statreg=3D0x0280, cachelnsz=3D0 (dwords)=0A=
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0A=
intpin=3Db, irq=3D10=0A=
map[20]: type 4, range 32, base 000018c0, size 5, enabled=0A=
pcib0: matched entry for 0.31.INTB=0A=
pcib0: slot 31 INTB hardwired to IRQ 19=0A=
agp0: <Intel 82945GM (945GM GMCH) SVGA controller> port 0x1800-0x1807 =
mem 0xd0300000-0xd037ffff,0xc0000000-0xcfffffff,0xd0400000-0xd043ffff =
irq 16 at device 2.0 on pci0=0A=
agp0: Reserved 0x80000 bytes for rid 0x10 type 3 at 0xd0300000=0A=
agp0: Reserved 0x80000 bytes for rid 0x10 type 3 at 0xd0300000=0A=
agp0: Reserved 0x40000 bytes for rid 0x1c type 3 at 0xd0400000=0A=
agp0: Reserved 0x10000000 bytes for rid 0x18 type 3 at 0xc0000000=0A=
agp0: detected 7932k stolen memory=0A=
agp0: aperture size is 256M=0A=
pci0: <display> at device 2.1 (no driver attached)=0A=
pci0: <multimedia> at device 27.0 (no driver attached)=0A=
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0=0A=
pcib1: secondary bus 2=0A=
pcib1: subordinate bus 2=0A=
pcib1: I/O decode 0x0-0x0=0A=
pcib1: memory decode 0x0-0x0=0A=
pcib1: prefetched decode 0x0-0x0=0A=
pci2: <ACPI PCI bus> on pcib1=0A=
pci2: physical bus=3D2=0A=
found-> vendor=3D0x11ab, dev=3D0x4352, revid=3D0x14=0A=
bus=3D2, slot=3D0, func=3D0=0A=
class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0=0A=
cmdreg=3D0x0000, statreg=3D0x4010, cachelnsz=3D16 (dwords)=0A=
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0A=
intpin=3Da, irq=3D11=0A=
powerspec 2 supports D0 D1 D2 D3 current D0=0A=
MSI supports 2 messages, 64 bit=0A=
map[10]: type 1, range 64, base 00000000, size 14, memory disabled=0A=
map[18]: type 4, range 32, base 00000000, size 8, port disabled=0A=
pcib1: matched entry for 2.0.INTA=0A=
pcib1: slot 0 INTA hardwired to IRQ 16=0A=
mskc0: <Marvell Yukon 88E8038 Gigabit Ethernet> irq 16 at device 0.0 on =
pci2=0A=
pcib1: mskc0 requested unsupported memory range 0x0-0xffffffff (decoding =
0x0-0x0, 0x0-0x0)=0A=
mskc0: 0x4000 bytes of rid 0x10 res 3 failed (0, 0xffffffff).=0A=
mskc0: Lazy allocation of 0x4 bytes rid 0x14 type 4 at 0x1000=0A=
mskc0: unknown device: id=3D0xff, rev=3D0x0f=0A=
device_attach: mskc0 attach returned 6=0A=
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0=0A=
pcib2: secondary bus 3=0A=
pcib2: subordinate bus 3=0A=
pcib2: I/O decode 0x0-0x0=0A=
pcib2: memory decode 0x0-0x0=0A=
pcib2: prefetched decode 0x0-0x0=0A=
pci3: <ACPI PCI bus> on pcib2=0A=
pci3: physical bus=3D3=0A=
found-> vendor=3D0x8086, dev=3D0x4222, revid=3D0x02=0A=
bus=3D3, slot=3D0, func=3D0=0A=
class=3D02-80-00, hdrtype=3D0x00, mfdev=3D0=0A=
cmdreg=3D0x0000, statreg=3D0x0010, cachelnsz=3D16 (dwords)=0A=
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns)=0A=
intpin=3Da, irq=3D11=0A=
powerspec 2 supports D0 D3 current D0=0A=
MSI supports 1 message, 64 bit=0A=
map[10]: type 1, range 32, base 00000000, size 12, memory disabled=0A=
pcib2: matched entry for 3.0.INTA=0A=
pcib2: slot 0 INTA hardwired to IRQ 17=0A=
pci3: <network> at device 0.0 (no driver attached)=0A=
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0=0A=
pcib3: secondary bus 4=0A=
pcib3: subordinate bus 4=0A=
pcib3: I/O decode 0x0-0x0=0A=
pcib3: memory decode 0x0-0x0=0A=
pcib3: prefetched decode 0x0-0x0=0A=
pci4: <ACPI PCI bus> on pcib3=0A=
pci4: physical bus=3D4=0A=
uhci0: <UHCI (generic) USB controller> port 0x1820-0x183f irq 23 at =
device 29.0 on pci0=0A=
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1820=0A=
ioapic0: routing intpin 23 (PCI IRQ 23) to vector 49=0A=
uhci0: [GIANT-LOCKED]=0A=
usb0: <UHCI (generic) USB controller> on uhci0=0A=
usb0: USB revision 1.0=0A=
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1=0A=
uhub0: 2 ports with 2 removable, self powered=0A=
uhci1: <UHCI (generic) USB controller> port 0x1840-0x185f irq 19 at =
device 29.1 on pci0=0A=
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1840=0A=
ioapic0: routing intpin 19 (PCI IRQ 19) to vector 50=0A=
uhci1: [GIANT-LOCKED]=0A=
usb1: <UHCI (generic) USB controller> on uhci1=0A=
usb1: USB revision 1.0=0A=
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1=0A=
uhub1: 2 ports with 2 removable, self powered=0A=
uhci2: <UHCI (generic) USB controller> port 0x1860-0x187f irq 18 at =
device 29.2 on pci0=0A=
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1860=0A=
ioapic0: routing intpin 18 (PCI IRQ 18) to vector 51=0A=
uhci2: [GIANT-LOCKED]=0A=
usb2: <UHCI (generic) USB controller> on uhci2=0A=
usb2: USB revision 1.0=0A=
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1=0A=
uhub2: 2 ports with 2 removable, self powered=0A=
uhci3: <UHCI (generic) USB controller> port 0x1880-0x189f irq 16 at =
device 29.3 on pci0=0A=
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1880=0A=
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 52=0A=
uhci3: [GIANT-LOCKED]=0A=
usb3: <UHCI (generic) USB controller> on uhci3=0A=
usb3: USB revision 1.0=0A=
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1=0A=
uhub3: 2 ports with 2 removable, self powered=0A=
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem =
0xd0644000-0xd06443ff irq 23 at device 29.7 on pci0=0A=
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xd0644000=0A=
ehci0: [GIANT-LOCKED]=0A=
usb4: EHCI version 1.0=0A=
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3=0A=
usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0=0A=
usb4: USB revision 2.0=0A=
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1=0A=
uhub4: 8 ports with 8 removable, self powered=0A=
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0=0A=
pcib4: secondary bus 10=0A=
pcib4: subordinate bus 11=0A=
pcib4: I/O decode 0x0-0x0=0A=
pcib4: memory decode 0x0-0x0=0A=
pcib4: prefetched decode 0x0-0x0=0A=
pcib4: Subtractively decoded bridge.=0A=
pci10: <ACPI PCI bus> on pcib4=0A=
pci10: physical bus=3D10=0A=
found-> vendor=3D0x104c, dev=3D0x8039, revid=3D0x00=0A=
bus=3D10, slot=3D9, func=3D0=0A=
class=3D06-07-00, hdrtype=3D0x02, mfdev=3D1=0A=
cmdreg=3D0x0000, statreg=3D0x0210, cachelnsz=3D16 (dwords)=0A=
lattimer=3D0x31 (1470 ns), mingnt=3D0x44 (17000 ns), maxlat=3D0x03 (750 =
ns)=0A=
intpin=3Da, irq=3D10=0A=
powerspec 2 supports D0 D1 D2 D3 current D0=0A=
map[10]: type 1, range 32, base d0204000, size 12, memory disabled=0A=
pcib4: requested memory range 0xd0204000-0xd0204fff: good=0A=
pcib4: matched entry for 10.9.INTA=0A=
pcib4: slot 9 INTA hardwired to IRQ 20=0A=
found-> vendor=3D0x104c, dev=3D0x803b, revid=3D0x00=0A=
bus=3D10, slot=3D9, func=3D2=0A=
class=3D01-80-00, hdrtype=3D0x00, mfdev=3D1=0A=
cmdreg=3D0x0006, statreg=3D0x0210, cachelnsz=3D16 (dwords)=0A=
lattimer=3D0x39 (1710 ns), mingnt=3D0x07 (1750 ns), maxlat=3D0x04 (1000 =
ns)=0A=
intpin=3Da, irq=3D10=0A=
powerspec 2 supports D0 D1 D2 D3 current D0=0A=
map[10]: type 1, range 32, base d0205000, size 12, enabled=0A=
pcib4: requested memory range 0xd0205000-0xd0205fff: good=0A=
pcib4: matched entry for 10.9.INTA=0A=
pcib4: slot 9 INTA hardwired to IRQ 20=0A=
cbb0: <PCI-CardBus Bridge> mem 0xd0204000-0xd0204fff irq 20 at device =
9.0 on pci10=0A=
cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xd0204000=0A=
cardbus0: <CardBus bus> on cbb0=0A=
pccard0: <16-bit PCCard bus> on cbb0=0A=
ioapic0: routing intpin 20 (PCI IRQ 20) to vector 53=0A=
cbb0: [MPSAFE]=0A=
cbb0: PCI Configuration space:=0A=
0x00: 0x8039104c 0x02100007 0x06070000 0x00823110 =0A=
0x10: 0xd0204000 0x020000a0 0x200b0b0a 0xfffff000 =0A=
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc =0A=
0x30: 0x00000000 0xfffffffc 0x00000000 0x07440114 =0A=
0x40: 0x01101025 0x00000001 0x00000000 0x00000000 =0A=
0x50: 0x00000000 0x00000000 0x00000000 0x00000000 =0A=
0x60: 0x00000000 0x00000000 0x00000000 0x00000000 =0A=
0x70: 0x00000000 0x00000000 0x00000000 0x00000000 =0A=
0x80: 0x1844d060 0x02d80019 0x00190016 0x01321b22 =0A=
0x90: 0x606602c0 0x00000000 0x00000000 0x00000000 =0A=
0xa0: 0xfe120001 0x00c00000 0x00000000 0x00000000 =0A=
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 =0A=
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 =0A=
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 =0A=
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 =0A=
0xf0: 0x7a923035 0x0f00174f 0x00000000 0x00000000 =0A=
pci10: <mass storage> at device 9.2 (no driver attached)=0A=
isab0: <PCI-ISA bridge> at device 31.0 on pci0=0A=
isa0: <ISA bus> on isab0=0A=
atapci0: <Intel ICH7M SATA300 controller> port =
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x18b0-0x18bf at device 31.2 on pci0=0A=
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x18b0=0A=
ata0: <ATA channel 0> on atapci0=0A=
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0=0A=
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6=0A=
ata0: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D00=0A=
ata0: stat0=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00=0A=
ata0: stat1=3D0x00 err=3D0x01 lsb=3D0x00 msb=3D0x00=0A=
ata0: reset tp2 stat0=3D50 stat1=3D00 devices=3D0x1<ATA_MASTER>=0A=
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 54=0A=
ata0: [MPSAFE]=0A=
ata1: <ATA channel 1> on atapci0=0A=
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170=0A=
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376=0A=
ata1: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D01=0A=
ata1: stat0=3D0x00 err=3D0x01 lsb=3D0x14 msb=3D0xeb=0A=
ata1: stat1=3D0x01 err=3D0x04 lsb=3D0x00 msb=3D0x00=0A=
ata1: reset tp2 stat0=3D00 stat1=3D01 devices=3D0x4<ATAPI_MASTER>=0A=
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 55=0A=
ata1: [MPSAFE]=0A=
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)=0A=
acpi_acad0: <AC Adapter> on acpi0=0A=
battery0: <ACPI Control Method Battery> on acpi0=0A=
acpi_lid0: <Control Method Lid Switch> on acpi0=0A=
acpi_button0: <Power Button> on acpi0=0A=
acpi_button1: <Sleep Button> on acpi0=0A=
acpi_tz0: <Thermal Zone> on acpi0=0A=
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0=0A=
atkbd0: <AT Keyboard> irq 1 on atkbdc0=0A=
atkbd: the current kbd controller command byte 0047=0A=
atkbd: keyboard ID 0x41ab (2)=0A=
kbd0 at atkbd0=0A=
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000=0A=
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 56=0A=
atkbd0: [GIANT-LOCKED]=0A=
psm0: unable to allocate IRQ=0A=
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0=0A=
psm0: current command byte:0047=0A=
psm0: <PS/2 Mouse> irq 12 on atkbdc0=0A=
ioapic0: routing intpin 12 (ISA IRQ 12) to vector 57=0A=
psm0: [GIANT-LOCKED]=0A=
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons=0A=
psm0: config:00000000, flags:00000008, packet size:3=0A=
psm0: syncmask:c0, syncbits:00=0A=
unknown: status reg test failed ff=0A=
unknown: status reg test failed ff=0A=
unknown: status reg test failed ff=0A=
unknown: status reg test failed ff=0A=
unknown: status reg test failed ff=0A=
unknown: status reg test failed ff=0A=
ex_isa_identify()=0A=
ata: ata0 already exists; skipping it=0A=
ata: ata1 already exists; skipping it=0A=
atkbdc: atkbdc0 already exists; skipping it=0A=
pnp_identify: Trying Read_Port at 203=0A=
pnp_identify: Trying Read_Port at 243=0A=
pnp_identify: Trying Read_Port at 283=0A=
pnp_identify: Trying Read_Port at 2c3=0A=
pnp_identify: Trying Read_Port at 303=0A=
pnp_identify: Trying Read_Port at 343=0A=
pnp_identify: Trying Read_Port at 383=0A=
pnp_identify: Trying Read_Port at 3c3=0A=
PNP Identify complete=0A=
sc: sc0 already exists; skipping it=0A=
vga: vga0 already exists; skipping it=0A=
isa_probe_children: disabling PnP devices=0A=
isa_probe_children: probing non-PnP devices=0A=
pmtimer0 on isa0=0A=
orm0: <ISA Option ROM> at iomem 0xdf800-0xdffff on isa0=0A=
adv0: not probed (disabled)=0A=
aha0: not probed (disabled)=0A=
aic0: not probed (disabled)=0A=
bt0: not probed (disabled)=0A=
cs0: not probed (disabled)=0A=
ed0: not probed (disabled)=0A=
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0=0A=
fe0: not probed (disabled)=0A=
ie0: not probed (disabled)=0A=
lnc0: not probed (disabled)=0A=
ppc0: parallel port not found.=0A=
ppc0: <Parallel port> failed to probe at irq 7 on isa0=0A=
sc0: <System console> at flags 0x100 on isa0=0A=
sc0: VGA <16 virtual consoles, flags=3D0x300>=0A=
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)=0A=
sio0: configured irq 4 not in bitmap of probed irqs 0=0A=
sio0: port may not be enabled=0A=
sio0: irq maps: 0x8c01 0x8c01 0x8c01 0x8c01=0A=
sio0: probe failed test(s): 0 1 2 4 6 7 9=0A=
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0=0A=
sio0: type 8250 or not responding=0A=
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 58=0A=
sio1: configured irq 3 not in bitmap of probed irqs 0=0A=
sio1: port may not be enabled=0A=
sio1: irq maps: 0x8c01 0x8c01 0x8c01 0x8c01=0A=
sio1: probe failed test(s): 0 1 2 4 6 7 9=0A=
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0=0A=
sio2: not probed (disabled)=0A=
sio3: not probed (disabled)=0A=
sn0: not probed (disabled)=0A=
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0=0A=
vt0: not probed (disabled)=0A=
isa_probe_children: probing PnP devices=0A=
ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 2, iclass 3/1=0A=
ums0: 3 buttons and Z dir.=0A=
Device configuration finished.=0A=
Reducing kern.maxvnodes 133772 -> 100000=0A=
procfs registered=0A=
lapic: Divisor 2, Frequency 83339553 hz=0A=
Timecounter "TSC" frequency 1666791270 Hz quality 800=0A=
Timecounters tick every 1.000 msec=0A=
lo0: bpf attached=0A=
rr232x: no controller detected.=0A=
acpi_acad0: acline initialization start=0A=
acpi_acad0: On Line=0A=
acpi_acad0: acline initialization done, tried 1 times=0A=
battery0: battery initialization start=0A=
battery0: battery initialization done, tried 1 times=0A=
ata0-master: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA133 cable=3D40 wire=0A=
ad0: 76319MB <WDC WD800BEVS-22RST0 04.01G04> at ata0-master SATA150=0A=
ad0: 156301488 sectors [155061C/16H/63S] 16 sectors/interrupt 1 depth =
queue=0A=
GEOM: new disk ad0=0A=
ad0: Intel check1 failed=0A=
ad0: Adaptec check1 failed=0A=
ad0: LSI (v3) check1 failed=0A=
ad0: LSI (v2) check1 failed=0A=
ad0: FreeBSD check1 failed=0A=
ata1-master: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA33 cable=3D40 wire=0A=
acd0: <Optiarc CD-RW CRX880A/KX07> CDRW drive at ata1 as master=0A=
acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, =
UDMA33=0A=
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet=0A=
acd0: Writes: CDR, CDRW, test write, burnproof=0A=
acd0: Audio: play, 256 volume levels=0A=
acd0: Mechanism: ejectable tray, unlocked=0A=
acd0: Medium: CD-R 120mm photo disc=0A=
ATA PseudoRAID loaded=0A=
Trying to mount root from ufs:/dev/ad0s2a=0A=
start_init: trying /sbin/init=0A=
------=_NextPart_000_000D_01C79509.76F59A00
Content-Type: text/plain; format=flowed; name="no_acpi.txt";
reply-type=original
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
filename="no_acpi.txt"
Copyright (c) 1992-2007 The FreeBSD Project.=0A=
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994=0A=
The Regents of the University of California. All rights reserved.=0A=
FreeBSD is a registered trademark of The FreeBSD Foundation.=0A=
FreeBSD 6.2-STABLE #0: Sat May 12 02:28:07 MYT 2007=0A=
root@:/usr/obj/usr/src/sys/GENERIC=0A=
MPTable: <INTEL Napa ERB >=0A=
Timecounter "i8254" frequency 1193182 Hz quality 0=0A=
CPU: Genuine Intel(R) CPU T2300 @ 1.66GHz (1666.80-MHz =
686-class CPU)=0A=
Origin =3D "GenuineIntel" Id =3D 0x6e8 Stepping =3D 8=0A=
=
Features=3D0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG=
E,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>=0A=
Features2=3D0xc189<SSE3,MON,EST,TM2,<b14>,<b15>>=0A=
AMD Features=3D0x100000<NX>=0A=
Cores per package: 2=0A=
real memory =3D 2137587712 (2038 MB)=0A=
avail memory =3D 2086813696 (1990 MB)=0A=
ioapic0: Assuming intbase of 0=0A=
ioapic0 <Version 2.0> irqs 0-23 on motherboard=0A=
kbd1 at kbdmux0=0A=
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, =
RF5413)=0A=
cpu0 on motherboard=0A=
pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard=0A=
pci0: <PCI bus> on pcib0=0A=
agp0: <Intel 82945GM (945GM GMCH) SVGA controller> port 0x1800-0x1807 =
mem 0xd0300000-0xd037ffff,0xc0000000-0xcfffffff,0xd0400000-0xd043ffff =
irq 16 at device 2.0 on pci0=0A=
agp0: detected 7932k stolen memory=0A=
agp0: aperture size is 256M=0A=
pci0: <display> at device 2.1 (no driver attached)=0A=
pci0: <multimedia> at device 27.0 (no driver attached)=0A=
pcib1: <MPTable PCI-PCI bridge> irq 16 at device 28.0 on pci0=0A=
pci2: <PCI bus> on pcib1=0A=
mskc0: <Marvell Yukon 88E8038 Gigabit Ethernet> port 0x2000-0x20ff mem =
0xd0000000-0xd0003fff irq 16 at device 0.0 on pci2=0A=
msk0: <Marvell Technology Group Ltd. Yukon FE Id 0xb7 Rev 0x01> on mskc0=0A=
msk0: Ethernet address: 00:16:36:c7:92:76=0A=
miibus0: <MII bus> on msk0=0A=
e1000phy0: <Marvell 88E3082 10/100 Fast Ethernet PHY> on miibus0=0A=
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto=0A=
ukphy0: <Generic IEEE 802.3u media interface> on miibus0=0A=
ukphy0: no media present=0A=
ukphy1: <Generic IEEE 802.3u media interface> on miibus0=0A=
ukphy1: no media present=0A=
mskc0: [FAST]=0A=
pcib2: <PCI-PCI bridge> irq 17 at device 28.1 on pci0=0A=
pci3: <PCI bus> on pcib2=0A=
pci3: <network> at device 0.0 (no driver attached)=0A=
pcib3: <PCI-PCI bridge> irq 18 at device 28.2 on pci0=0A=
pci4: <PCI bus> on pcib3=0A=
pcib4: <PCI-PCI bridge> irq 19 at device 28.3 on pci0=0A=
pci5: <PCI bus> on pcib4=0A=
uhci0: <UHCI (generic) USB controller> port 0x1820-0x183f irq 23 at =
device 29.0 on pci0=0A=
uhci0: [GIANT-LOCKED]=0A=
usb0: <UHCI (generic) USB controller> on uhci0=0A=
usb0: USB revision 1.0=0A=
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1=0A=
uhub0: 2 ports with 2 removable, self powered=0A=
uhci1: <UHCI (generic) USB controller> port 0x1840-0x185f irq 19 at =
device 29.1 on pci0=0A=
uhci1: [GIANT-LOCKED]=0A=
usb1: <UHCI (generic) USB controller> on uhci1=0A=
usb1: USB revision 1.0=0A=
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1=0A=
uhub1: 2 ports with 2 removable, self powered=0A=
uhci2: <UHCI (generic) USB controller> port 0x1860-0x187f irq 18 at =
device 29.2 on pci0=0A=
uhci2: [GIANT-LOCKED]=0A=
usb2: <UHCI (generic) USB controller> on uhci2=0A=
usb2: USB revision 1.0=0A=
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1=0A=
uhub2: 2 ports with 2 removable, self powered=0A=
uhci3: <UHCI (generic) USB controller> port 0x1880-0x189f irq 16 at =
device 29.3 on pci0=0A=
uhci3: [GIANT-LOCKED]=0A=
usb3: <UHCI (generic) USB controller> on uhci3=0A=
usb3: USB revision 1.0=0A=
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1=0A=
uhub3: 2 ports with 2 removable, self powered=0A=
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem =
0xd0644000-0xd06443ff irq 23 at device 29.7 on pci0=0A=
ehci0: [GIANT-LOCKED]=0A=
usb4: EHCI version 1.0=0A=
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3=0A=
usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0=0A=
usb4: USB revision 2.0=0A=
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1=0A=
uhub4: 8 ports with 8 removable, self powered=0A=
pcib5: <MPTable PCI-PCI bridge> at device 30.0 on pci0=0A=
pci10: <PCI bus> on pcib5=0A=
cbb0: <PCI-CardBus Bridge> mem 0xd0204000-0xd0204fff irq 20 at device =
9.0 on pci10=0A=
cardbus0: <CardBus bus> on cbb0=0A=
pccard0: <16-bit PCCard bus> on cbb0=0A=
pci10: <mass storage> at device 9.2 (no driver attached)=0A=
isab0: <PCI-ISA bridge> at device 31.0 on pci0=0A=
isa0: <ISA bus> on isab0=0A=
atapci0: <Intel ICH7M SATA300 controller> port =
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x18b0-0x18bf at device 31.2 on pci0=0A=
ata0: <ATA channel 0> on atapci0=0A=
ata1: <ATA channel 1> on atapci0=0A=
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)=0A=
pmtimer0 on isa0=0A=
orm0: <ISA Option ROM> at iomem 0xdf800-0xdffff on isa0=0A=
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0=0A=
atkbd0: <AT Keyboard> irq 1 on atkbdc0=0A=
kbd0 at atkbd0=0A=
atkbd0: [GIANT-LOCKED]=0A=
psm0: <PS/2 Mouse> irq 12 on atkbdc0=0A=
psm0: [GIANT-LOCKED]=0A=
psm0: model Generic PS/2 mouse, device ID 0=0A=
ppc0: parallel port not found.=0A=
sc0: <System console> at flags 0x100 on isa0=0A=
sc0: VGA <16 virtual consoles, flags=3D0x300>=0A=
sio0: configured irq 4 not in bitmap of probed irqs 0=0A=
sio0: port may not be enabled=0A=
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0=0A=
sio0: type 8250 or not responding=0A=
sio1: configured irq 3 not in bitmap of probed irqs 0=0A=
sio1: port may not be enabled=0A=
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0=0A=
unknown: <PNP0303> can't assign resources (port)=0A=
unknown: <PNP0c02> can't assign resources (memory)=0A=
unknown: <PNP0c02> can't assign resources (memory)=0A=
unknown: <INT0800> can't assign resources (memory)=0A=
unknown: <PNP0f13> can't assign resources (irq)=0A=
ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 2, iclass 3/1=0A=
ums0: 3 buttons and Z dir.=0A=
Timecounter "TSC" frequency 1666799550 Hz quality 800=0A=
Timecounters tick every 1.000 msec=0A=
ad0: 76319MB <WDC WD800BEVS-22RST0 04.01G04> at ata0-master SATA150=0A=
acd0: CDRW <Optiarc CD-RW CRX880A/KX07> at ata1-master UDMA33=0A=
Trying to mount root from ufs:/dev/ad0s2a=0A=
------=_NextPart_000_000D_01C79509.76F59A00
Content-Type: text/plain; format=flowed; name="sysctl_hw.acpi.txt";
reply-type=original
Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment;
filename="sysctl_hw.acpi.txt"
hw.acpi.supported_sleep_state: S3 S4 S5=0A=
hw.acpi.power_button_state: S5=0A=
hw.acpi.sleep_button_state: S3=0A=
hw.acpi.lid_switch_state: NONE=0A=
hw.acpi.standby_state: S1=0A=
hw.acpi.suspend_state: S3=0A=
hw.acpi.sleep_delay: 1=0A=
hw.acpi.s4bios: 0=0A=
hw.acpi.verbose: 1=0A=
hw.acpi.disable_on_reboot: 0=0A=
hw.acpi.handle_reboot: 0=0A=
hw.acpi.reset_video: 0=0A=
hw.acpi.cpu.cx_lowest: C1=0A=
hw.acpi.acline: 1=0A=
hw.acpi.battery.life: 100=0A=
hw.acpi.battery.time: -1=0A=
hw.acpi.battery.state: 0=0A=
hw.acpi.battery.units: 1=0A=
hw.acpi.battery.info_expire: 5=0A=
hw.acpi.thermal.min_runtime: 0=0A=
hw.acpi.thermal.polling_rate: 10=0A=
hw.acpi.thermal.user_override: 0=0A=
hw.acpi.thermal.tz0.temperature: 66.0C=0A=
hw.acpi.thermal.tz0.active: -1=0A=
hw.acpi.thermal.tz0.passive_cooling: 1=0A=
hw.acpi.thermal.tz0.thermal_flags: 0=0A=
hw.acpi.thermal.tz0._PSV: 99.0C=0A=
hw.acpi.thermal.tz0._HOT: -1=0A=
hw.acpi.thermal.tz0._CRT: 105.0C=0A=
hw.acpi.thermal.tz0._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1=0A=
------=_NextPart_000_000D_01C79509.76F59A00--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?001001c794c6$6abb1730$0401a8c0>