Date: Fri, 17 May 2002 13:14:13 +0300 From: "Tihomir Vassilev" <TVassilev@dker.bg> To: <freebsd-questions@FreeBSD.ORG> Subject: Network Configuration Question Message-ID: <001f01c1fd8b$984429d0$460118ac@tihomir>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
When doing post installation procedures with sysinstall (immediately after new installation) the box next to Interfaces (Network Services Menu) could not be checked after inputing network parameters -- after answering the question "Would you like to bring the xl0 interface up right now?"
In spite of this the network is operational exept for inability to browse LAN in KDE 3.0, even after tuning needed network parameters for LAN browsing. The following error message appear when trying to browse LAN from Konqueror: "Could not connect to host localhost!"
Here is my network interfaces configured:
xl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=3<rxcsum,txcsum>
inet 172.24.1.10 netmask 0xffffff00 broadcast 172.24.1.255
inet6 fe80::250:4ff:fe09:7e3c%xl0 prefixlen 64 scopeid 0x1
ether 00:50:04:09:7e:3c
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
lp0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
inet 127.0.0.1 netmask 0xff000000
ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500
sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 552
faith0: flags=8002<BROADCAST,MULTICAST> mtu 1500
Here is my dmesg output:
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.5-RELEASE #0: Fri May 17 11:03:02 EEST 2002
tihomir@bsd.dker.bg:/usr/src/sys/compile/BSDKERNEL
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD Athlon(tm) processor (902.05-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x642 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!>
real memory = 268369920 (262080K bytes)
config> di sn0
config> di lnc0
config> di ie0
config> di fe0
config> q
avail memory = 256593920 (250580K bytes)
Preloaded elf kernel "kernel" at 0xc048e000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc048e09c.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 7 entries at 0xc00fdef0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <VIA 8363 (Apollo KT133) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI model 534d graphics accelerator> at 0.0 irq 10
isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA100 controller> port 0xd000-0xd00f at device 7.1 on pci0
atapci0: Correcting VIA config for southbridge data corruption bug
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 11 at device 7.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 11 at device 7.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
chip1: <VIA 82C686 ACPI interface> at device 7.4 on pci0
pcm0: <VIA VT82C686A> port 0xe400-0xe403,0xe000-0xe003,0xdc00-0xdcff irq 5 at device 7.5 on pci0
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xec00-0xec7f mem 0xeb000000-0xeb00007f irq 11 at device 9.0 on pci0
xl0: Ethernet address: 00:50:04:09:7e:3c
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
unknown: <PNP0000> can't assign resources
unknown: <PNP0303> can't assign resources
unknown: <PNP0f13> can't assign resources
unknown: <PNP0700> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0400> can't assign resources
ad0: 19092MB <ST320413A> [38792/16/63] at ata0-master UDMA100
acd0: CDROM <LTN403> at ata1-master using PIO4
acd1: DVD-ROM <PHILIPS PCA532> at ata1-slave using PIO4
Mounting root from ufs:/dev/ad0s1a
Thank you in advance.
Tihomir
[-- Attachment #2 --]
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=koi8-r">
<META content="MSHTML 6.00.2716.2200" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>When doing post installation procedures with
sysinstall (immediately after new installation) the box next to Interfaces
(Network Services Menu) could not be checked after inputing network parameters
-- after answering the question "Would you like to bring the xl0 interface up
right now?"</FONT></DIV>
<DIV><FONT face=Arial size=2>In spite of this the network is operational exept
for inability to browse LAN in KDE 3.0, even after tuning needed network
parameters for LAN browsing. The following error message appear when trying to
browse LAN from Konqueror: "Could not connect to host localhost!"</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Here is my network interfaces
configured:</FONT></DIV><FONT face=Arial size=2><FONT size=2>
<DIV><FONT face="Courier New"> xl0:
flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500</FONT></DIV>
<DIV><FONT face="Courier New">
options=3<rxcsum,txcsum></FONT></DIV>
<DIV><FONT face="Courier New"> inet 172.24.1.10 netmask
0xffffff00 broadcast 172.24.1.255</FONT></DIV>
<DIV><FONT face="Courier New"> inet6
fe80::250:4ff:fe09:7e3c%xl0 prefixlen 64 scopeid 0x1</FONT></DIV>
<DIV><FONT face="Courier New"> ether
00:50:04:09:7e:3c</FONT></DIV>
<DIV><FONT face="Courier New"> media: Ethernet autoselect
(100baseTX <full-duplex>)</FONT></DIV>
<DIV><FONT face="Courier New"> status: active</FONT></DIV>
<DIV><FONT face="Courier New"> lp0:
flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500</FONT></DIV>
<DIV><FONT face="Courier New"> lo0:
flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384</FONT></DIV>
<DIV><FONT face="Courier New"> inet6 ::1 prefixlen
128</FONT></DIV>
<DIV><FONT face="Courier New"> inet6 fe80::1%lo0 prefixlen 64
scopeid 0x3</FONT></DIV>
<DIV><FONT face="Courier New"> inet 127.0.0.1 netmask
0xff000000</FONT></DIV>
<DIV><FONT face="Courier New"> ppp0:
flags=8010<POINTOPOINT,MULTICAST> mtu 1500</FONT></DIV>
<DIV><FONT face="Courier New"> sl0:
flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 552</FONT></DIV>
<DIV><FONT face="Courier New"> faith0:
flags=8002<BROADCAST,MULTICAST> mtu 1500</FONT></DIV></FONT></FONT>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Here is my dmesg output:</FONT></DIV><FONT
face=Arial size=2><FONT size=2>
<DIV><FONT face="Courier New"> Copyright (c) 1992-2002 The
FreeBSD Project.</FONT></DIV>
<DIV><FONT face="Courier New"> Copyright (c) 1979, 1980, 1983,
1986, 1988, 1989, 1991, 1992, 1993, 1994</FONT></DIV>
<DIV><FONT face="Courier New"> The Regents of the University
of California. All rights reserved.</FONT></DIV>
<DIV><FONT face="Courier New"> FreeBSD 4.5-RELEASE #0: Fri May
17 11:03:02 EEST 2002</FONT></DIV>
<DIV><FONT face="Courier New">
<A></A>tihomir@bsd.dker.bg:/usr/src/sys/compile/BSDKERNEL</FONT></DIV>
<DIV><FONT face="Courier New"> Timecounter "i8254" frequency
1193182 Hz</FONT></DIV>
<DIV><FONT face="Courier New"> CPU: AMD Athlon(tm) processor
(902.05-MHz 686-class CPU)</FONT></DIV>
<DIV><FONT face="Courier New"> Origin = "AuthenticAMD" Id =
0x642 Stepping = 2</FONT></DIV>
<DIV><FONT face="Courier New">
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR></FONT></DIV>
<DIV><FONT face="Courier New"> AMD
Features=0xc0440000<<b18>,AMIE,DSP,3DNow!></FONT></DIV>
<DIV><FONT face="Courier New"> real memory = 268369920
(262080K bytes)</FONT></DIV>
<DIV><FONT face="Courier New"> config> di sn0</FONT></DIV>
<DIV><FONT face="Courier New"> config> di lnc0</FONT></DIV>
<DIV><FONT face="Courier New"> config> di ie0</FONT></DIV>
<DIV><FONT face="Courier New"> config> di fe0</FONT></DIV>
<DIV><FONT face="Courier New"> config> q</FONT></DIV>
<DIV><FONT face="Courier New"> avail memory = 256593920
(250580K bytes)</FONT></DIV>
<DIV><FONT face="Courier New"> Preloaded elf kernel "kernel"
at 0xc048e000.</FONT></DIV>
<DIV><FONT face="Courier New"> Preloaded userconfig_script
"/boot/kernel.conf" at 0xc048e09c.</FONT></DIV>
<DIV><FONT face="Courier New"> Pentium Pro MTRR support
enabled</FONT></DIV>
<DIV><FONT face="Courier New"> md0: Malloc disk</FONT></DIV>
<DIV><FONT face="Courier New"> Using $PIR table, 7 entries at
0xc00fdef0</FONT></DIV>
<DIV><FONT face="Courier New"> npx0: <math processor> on
motherboard</FONT></DIV>
<DIV><FONT face="Courier New"> npx0: INT 16
interface</FONT></DIV>
<DIV><FONT face="Courier New"> pcib0: <Host to PCI
bridge> on motherboard</FONT></DIV>
<DIV><FONT face="Courier New"> pci0: <PCI bus> on
pcib0</FONT></DIV>
<DIV><FONT face="Courier New"> pcib1: <VIA 8363 (Apollo
KT133) PCI-PCI (AGP) bridge> at device 1.0 on pci0</FONT></DIV>
<DIV><FONT face="Courier New"> pci1: <PCI bus> on
pcib1</FONT></DIV>
<DIV><FONT face="Courier New"> pci1: <ATI model 534d
graphics accelerator> at 0.0 irq 10</FONT></DIV>
<DIV><FONT face="Courier New"> isab0: <VIA 82C686 PCI-ISA
bridge> at device 7.0 on pci0</FONT></DIV>
<DIV><FONT face="Courier New"> isa0: <ISA bus> on
isab0</FONT></DIV>
<DIV><FONT face="Courier New"> atapci0: <VIA 82C686 ATA100
controller> port 0xd000-0xd00f at device 7.1 on pci0</FONT></DIV>
<DIV><FONT face="Courier New"> atapci0: Correcting VIA config
for southbridge data corruption bug</FONT></DIV>
<DIV><FONT face="Courier New"> ata0: at 0x1f0 irq 14 on
atapci0</FONT></DIV>
<DIV><FONT face="Courier New"> ata1: at 0x170 irq 15 on
atapci0</FONT></DIV>
<DIV><FONT face="Courier New"> uhci0: <VIA 83C572 USB
controller> port 0xd400-0xd41f irq 11 at device 7.2 on pci0</FONT></DIV>
<DIV><FONT face="Courier New"> usb0: <VIA 83C572 USB
controller> on uhci0</FONT></DIV>
<DIV><FONT face="Courier New"> usb0: USB revision
1.0</FONT></DIV>
<DIV><FONT face="Courier New"> uhub0: VIA UHCI root hub, class
9/0, rev 1.00/1.00, addr 1</FONT></DIV>
<DIV><FONT face="Courier New"> uhub0: 2 ports with 2
removable, self powered</FONT></DIV>
<DIV><FONT face="Courier New"> uhci1: <VIA 83C572 USB
controller> port 0xd800-0xd81f irq 11 at device 7.3 on pci0</FONT></DIV>
<DIV><FONT face="Courier New"> usb1: <VIA 83C572 USB
controller> on uhci1</FONT></DIV>
<DIV><FONT face="Courier New"> usb1: USB revision
1.0</FONT></DIV>
<DIV><FONT face="Courier New"> uhub1: VIA UHCI root hub, class
9/0, rev 1.00/1.00, addr 1</FONT></DIV>
<DIV><FONT face="Courier New"> uhub1: 2 ports with 2
removable, self powered</FONT></DIV>
<DIV><FONT face="Courier New"> chip1: <VIA 82C686 ACPI
interface> at device 7.4 on pci0</FONT></DIV>
<DIV><FONT face="Courier New"> pcm0: <VIA VT82C686A>
port 0xe400-0xe403,0xe000-0xe003,0xdc00-0xdcff irq 5 at device 7.5 on
pci0</FONT></DIV>
<DIV><FONT face="Courier New"> xl0: <3Com 3c905B-TX Fast
Etherlink XL> port 0xec00-0xec7f mem 0xeb000000-0xeb00007f irq 11 at device
9.0 on pci0</FONT></DIV>
<DIV><FONT face="Courier New"> xl0: Ethernet address:
00:50:04:09:7e:3c</FONT></DIV>
<DIV><FONT face="Courier New"> miibus0: <MII bus> on
xl0</FONT></DIV>
<DIV><FONT face="Courier New"> xlphy0: <3Com internal media
interface> on miibus0</FONT></DIV>
<DIV><FONT face="Courier New"> xlphy0: 10baseT, 10baseT-FDX,
100baseTX, 100baseTX-FDX, auto</FONT></DIV>
<DIV><FONT face="Courier New"> orm0: <Option ROM> at
iomem 0xc0000-0xc7fff on isa0</FONT></DIV>
<DIV><FONT face="Courier New"> fdc0: <NEC 72065B or
clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0</FONT></DIV>
<DIV><FONT face="Courier New"> fdc0: FIFO enabled, 8 bytes
threshold</FONT></DIV>
<DIV><FONT face="Courier New"> fd0: <1440-KB 3.5" drive>
on fdc0 drive 0</FONT></DIV>
<DIV><FONT face="Courier New"> atkbdc0: <Keyboard
controller (i8042)> at port 0x60,0x64 on isa0</FONT></DIV>
<DIV><FONT face="Courier New"> atkbd0: <AT Keyboard>
flags 0x1 irq 1 on atkbdc0</FONT></DIV>
<DIV><FONT face="Courier New"> kbd0 at atkbd0</FONT></DIV>
<DIV><FONT face="Courier New"> psm0: <PS/2 Mouse> irq 12
on atkbdc0</FONT></DIV>
<DIV><FONT face="Courier New"> psm0: model IntelliMouse,
device ID 3</FONT></DIV>
<DIV><FONT face="Courier New"> vga0: <Generic ISA VGA>
at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0</FONT></DIV>
<DIV><FONT face="Courier New"> sc0: <System console> at
flags 0x100 on isa0</FONT></DIV>
<DIV><FONT face="Courier New"> sc0: VGA <16 virtual
consoles, flags=0x300></FONT></DIV>
<DIV><FONT face="Courier New"> sio0 at port 0x3f8-0x3ff irq 4
flags 0x10 on isa0</FONT></DIV>
<DIV><FONT face="Courier New"> sio0: type 16550A</FONT></DIV>
<DIV><FONT face="Courier New"> sio1 at port 0x2f8-0x2ff irq 3
on isa0</FONT></DIV>
<DIV><FONT face="Courier New"> sio1: type 16550A</FONT></DIV>
<DIV><FONT face="Courier New"> ppc0: <Parallel port> at
port 0x378-0x37f irq 7 on isa0</FONT></DIV>
<DIV><FONT face="Courier New"> ppc0: Generic chipset
(EPP/NIBBLE) in COMPATIBLE mode</FONT></DIV>
<DIV><FONT face="Courier New"> plip0: <PLIP network
interface> on ppbus0</FONT></DIV>
<DIV><FONT face="Courier New"> lpt0: <Printer> on
ppbus0</FONT></DIV>
<DIV><FONT face="Courier New"> lpt0: Interrupt-driven
port</FONT></DIV>
<DIV><FONT face="Courier New"> ppi0: <Parallel I/O> on
ppbus0</FONT></DIV>
<DIV><FONT face="Courier New"> unknown: <PNP0000> can't
assign resources</FONT></DIV>
<DIV><FONT face="Courier New"> unknown: <PNP0303> can't
assign resources</FONT></DIV>
<DIV><FONT face="Courier New"> unknown: <PNP0f13> can't
assign resources</FONT></DIV>
<DIV><FONT face="Courier New"> unknown: <PNP0700> can't
assign resources</FONT></DIV>
<DIV><FONT face="Courier New"> unknown: <PNP0501> can't
assign resources</FONT></DIV>
<DIV><FONT face="Courier New"> unknown: <PNP0501> can't
assign resources</FONT></DIV>
<DIV><FONT face="Courier New"> unknown: <PNP0400> can't
assign resources</FONT></DIV>
<DIV><FONT face="Courier New"> ad0: 19092MB <ST320413A>
[38792/16/63] at ata0-master UDMA100</FONT></DIV>
<DIV><FONT face="Courier New"> acd0: CDROM <LTN403> at
ata1-master using PIO4</FONT></DIV>
<DIV><FONT face="Courier New"> acd1: DVD-ROM <PHILIPS
PCA532> at ata1-slave using PIO4</FONT></DIV>
<DIV><FONT face="Courier New"> Mounting root from
ufs:/dev/ad0s1a</FONT></FONT></FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Thank you in advance.</FONT></DIV>
<DIV><FONT face=Arial size=2>Tihomir</FONT></DIV></BODY></HTML>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?001f01c1fd8b$984429d0$460118ac>