Date: Mon, 29 Mar 2004 21:06:51 -0500 From: "Matt Emmerton" <matt@gsicomp.on.ca> To: <freebsd-current@freebsd.org> Subject: Problems with fxp0 and wi0 devices Message-ID: <002501c415fb$aa8b7fa0$1200a8c0@gsicomp.on.ca>
next in thread | raw e-mail | index | archive | help
I'm running FreeBSD 5.2.1-RELEASE on a ThinkPad T23 and I can't use either of the built-in fxp0 or wi0 network adapters. Whenever I try and configure them with dhclient, dhclient just hangs. Whenever I try and configure them manually (static IP and route), packets never go anywhere. Whenever I access fxp0, I get "fxp0: device timeout" messages on my screen. I looked through cvsweb and didn't see anything that looked useful post 5.2.1-REL. Here is the relevant part of dmesg: fxp0: <Intel 82801CAM (ICH3) Pro/100 VE Ethernet> port 0x7000-0x703f mem 0xc0200000-0xc0200fff irq 11 at device 8.0 on pci2 fxp0: Ethernet address 00:d0:59:33:b2:eb wi0: <Intersil Prims2.5> mem 0xec000000-0xec000fff irq 11 at device 2.0 on pci2 wi0: 802.11 address: 00:20:e0:89:4e:0c wi0: using RF:PRIMS2.5 MAC:ISL3874A(Mini-PCI) wi0: Intersil Firmware: Primary (1.0.5), Station (1.3.3) wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps And pciconf -l: fxp0@pci2:8:0: class=0x020000 card=0x02091014 chip=0x10318086 rev=0x41 hdr=0x00 wi0@pci2:2:0: class=0x020000 card=0x40461668 chip=0x30731260 rev=0x01 hdr=0x00 -- Matt Emmerton
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?002501c415fb$aa8b7fa0$1200a8c0>