Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 16 Mar 2006 09:04:05 -0500
From:      "Grant Peel" <gpeel@thenetnow.com>
To:        <freebsd-questions@freebsd.org>
Subject:   System Still Freezing
Message-ID:  <003e01c64902$809839e0$6501a8c0@GRANT>

next in thread | raw e-mail | index | archive | help
Hi all,

Another chapter in the life (and death), of my Dell PE 1850.

As you may be aware, I have a PE 1850 that has started to intermitantly 
freeze (this all started Feb 23rd). SOmetimes, it will run for 2 days, then 
freeze, sometimes it can run as long as 5 days.

All logs and everything turned up to near debug, show nothing. The system 
just stops dead, and again, a physical suyvey of the server reveals nothing. 
All lights still working and blinking, no excessive heat not beeps etc etc.

A week ago, I ran every 32 bit Dell diagnostic I could on it ... for 4 hours 
straight and not 1 error found. I also ran memetst86 for 3 hours and no 
errors found.

Here are some particulars:

FreeBSD 6.0 RELEASE
Dell PowerEdge 1850
-Intel 3.0 GHz Duel Core.
-512 MB DDR RAn
-74 GB SCSI Seagate Cheetah 10k.
- 2 Onboard Intel Pro1000 (1 GB) NICS (Both connected to my switch, 1 LAN 
and 1 WAN.).
- 1 Built in (Dedicated Riser) DRAC 4/I card.
- NO RAID, No Extra VIdeo or sound. No keyboard plugged in, no monitor.

SHould I consider diableing APIC and Hyperthreading? Does anything know if 
these two would be causing all the issues I have in the kernel?

I have been reading alot about interupt storms lately. How can I tell if 
this is whats happeneing here?

Thanks again all,

-GRant


Kernel boot file (dmesg.boot):

root on s1# more dmesg.boot
dmesg.boot: No such file or directory
root on s1# pwd
/usr/src/sys/i386/conf
root on s1# cd /var/run
root on s1# more dmesg.boot
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 6.0-RELEASE #2: Fri Mar 10 15:39:52 EST 2006
    gpeel@s1.fpm3.com:/usr/src/sys/i386/compile/DS9
MPTable: <DELL     PE 016C     >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 3.00GHz (2992.71-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf43  Stepping = 3
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SS
E2,SS,HTT,TM,PBE>
  Features2=0x641d<SSE3,RSVD2,MON,DS_CPL,CNTX-ID,CX16,<b14>>
  AMD Features=0x20100000<NX,LM>
  Hyperthreading: 2 logical CPUs
real memory  = 536608768 (511 MB)
avail memory = 515788800 (491 MB)
ioapic0: Changing APIC ID to 2
ioapic0: Assuming intbase of 0
ioapic1: Changing APIC ID to 3
ioapic1: Assuming intbase of 24
ioapic2: Changing APIC ID to 4
ioapic2: Assuming intbase of 48
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 2.0 on pci0
pci1: <PCI bus> on pcib1
pcib2: <MPTable PCI-PCI bridge> at device 0.0 on pci1
pci2: <PCI bus> on pcib2
mpt0: <LSILogic 1030 Ultra4 Adapter> port 0xec00-0xecff mem 
0xdfdf0000-0xdfdfffff,0xdfde0000-0xdfdeffff irq 26 at device 5.0 o
n pci2
mpt0: [GIANT-LOCKED]
mpt0: MPI Version=1.2.12.0
mpt0: Unhandled Event Notify Frame. Event 0xa.
pcib3: <MPTable PCI-PCI bridge> at device 0.2 on pci1
pci3: <PCI bus> on pcib3
pcib4: <PCI-PCI bridge> at device 4.0 on pci0
pci4: <PCI bus> on pcib4
pcib5: <PCI-PCI bridge> at device 5.0 on pci0
pci5: <PCI bus> on pcib5
pcib6: <MPTable PCI-PCI bridge> at device 0.0 on pci5
pci6: <PCI bus> on pcib6
em0: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port 
0xdcc0-0xdcff mem 0xdfae0000-0xdfafffff irq 48 at device 7.0
 on pci6
em0: Ethernet address: 00:14:22:1c:d5:7e
em0:  Speed:N/A  Duplex:N/A
pcib7: <MPTable PCI-PCI bridge> at device 0.2 on pci5
pci7: <PCI bus> on pcib7
em1: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port 
0xccc0-0xccff mem 0xdf8e0000-0xdf8fffff irq 49 at device 8.0
 on pci7
em1: Ethernet address: 00:14:22:1c:d5:7f
em1:  Speed:N/A  Duplex:N/A
pcib8: <PCI-PCI bridge> at device 6.0 on pci0
pci8: <PCI bus> on pcib8
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xace0-0xacff irq 16 
at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xacc0-0xacdf irq 19 
at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xaca0-0xacbf irq 18 
at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xdff00000-0xdff003ff irq 23 
at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
uhub4: vendor 0x413c product 0xa001, class 9/0, rev 2.00/0.00, addr 2
uhub4: multiple transaction translators
uhub4: 2 ports with 2 removable, self powered
pcib9: <MPTable PCI-PCI bridge> at device 30.0 on pci0
pci9: <PCI bus> on pcib9
pci9: <unknown> at device 5.0 (no driver attached)
pci9: <unknown> at device 5.1 (no driver attached)
pci9: <unknown> at device 5.2 (no driver attached)
atapci0: <SiI 0680 UDMA133 controller> port 
0xbcf0-0xbcf7,0xbce4-0xbce7,0xbcd8-0xbcdf,0xbcd0-0xbcd3,0xbc70-0xbc7f mem 
0xdf5fec
00-0xdf5fecff irq 23 at device 6.0 on pci9
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
pci9: <display, VGA> at device 13.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH5 UDMA100 controller> port 
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci1
ata1: <ATA channel 1> on atapci1
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 
0xc0000-0xcafff,0xcb000-0xcefff,0xec000-0xeffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0c02> can't assign resources (memory)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0c02> can't assign resources (port)
unknown: <PNP0c01> can't assign resources (port)
ukbd0: Dell DRAC4, rev 1.10/0.00, addr 2, iclass 3/1
kbd1 at ukbd0
ums0: Dell DRAC4, rev 1.10/0.00, addr 2, iclass 3/1
ums0: X report 0x0002 not supported
device_attach: ums0 attach returned 6
Timecounter "TSC" frequency 2992712437 Hz quality 800
Timecounters tick every 1.000 msec
Waiting 5 seconds for SCSI devices to settle
acd0: CDROM <TEAC CD-ROM CD-224E-N/3.AB> at ata0-master UDMA33
device_attach: afd0 attach returned 6
acd1: CDROM <VIRTUALCDROM DRIVE/> at ata2-slave PIO3
ses0 at mpt0 bus 0 target 6 lun 0
ses0: <PE/PV 1x2 SCSI BP 1.0> Fixed Processor SCSI-2 device
ses0: 3.300MB/s transfers
ses0: SAF-TE Compliant Device
da0 at mpt0 bus 0 target 0 lun 0
da0: <SEAGATE ST373207LC D701> Fixed Direct Access SCSI-3 device
da0: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing 
Enabled
da0: 70007MB (143374650 512 byte sectors: 255H 63S/T 8924C)
Trying to mount root from ufs:/dev/da0s1a
WARNING: / was not properly dismounted
WARNING: /home was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
/var: mount pending error: blocks 4 files 1
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled, 
default to deny, logging disabled 





Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?003e01c64902$809839e0$6501a8c0>