Date: Tue, 6 Feb 2001 16:55:02 +1300 From: "Mark Ibell" <marki@paradise.net.nz> To: <freebsd-questions@freebsd.org> Subject: SCSI parity error Message-ID: <004301c08ff0$96e0c5d0$0101a8c0@evileye>
next in thread | raw e-mail | index | archive | help
Hi, We've just experienced a nasty server crash on a system running 4.1-RELEASE. The drive configuration is 2 x Quantum Atlas 10k2 drives running off an Adaptec 2940U2W controller. The relevant log entries are listed below. Any ideas what could have caused this - both disks appear to check out ok according to the SCSI BIOS 'Verify Media' option. Cheers, Mark (da1:ahc0:0:6:0): parity error detected in Data-in phase. SEQADDR(0x166) SCSIRATE(0x93) ahc0:A:6: unknown scsi bus phase 0. Attempting to continue ahc0: WARNING no command for scb 0 (cmdcmplt) QOUTPOS = 195 ahc0: WARNING no command for scb 96 (cmdcmplt) QOUTPOS = 196 ... ahc0: WARNING no command for scb 6 (cmdcmplt) QOUTPOS = 219 (da1:ahc0:0:6:0): SCB 0x13 - timed out while idle, SEQADDR == 0xb (da1:ahc0:0:6:0): Queuing a BDR SCB (da1:ahc0:0:6:0): Bus Device Reset Message Sent (da1:ahc0:0:6:0): no longer in timeout, status = 34c ahc0: Bus Device Reset on A:6. 1 SCBs aborted (da0:ahc0:0:5:0): SCB 0x8c - timed out while idle, SEQADDR == 0xa (da0:ahc0:0:5:0): Queuing a BDR SCB (da0:ahc0:0:5:0): Bus Device Reset Message Sent (da0:ahc0:0:5:0): no longer in timeout, status = 34b ahc0: Bus Device Reset on A:5. 7 SCBs aborted ... To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?004301c08ff0$96e0c5d0$0101a8c0>