Date: Sun, 5 Oct 2003 15:33:47 +0200 From: "Brunoc@quipo.it" <brunoc@quipo.it> To: <freebsd-questions@freebsd.org> Subject: Ping response: sendto: Permission denied Message-ID: <007001c38b45$4f1b4f60$c90e5e3e@computer>
next in thread | raw e-mail | index | archive | help
Hi,
in the process of configuring my ppp to access some internet
provider (I'm using an analog modem), at a certain point of the
configuration, I want to test my network with ping,with these results:
root# ping localhost
PING localhost.singles.it (127.0.0.1): 56 data bytes
ping: sendto: Permission denied
ping: sendto: Permission denied
^C
--- localhost.singles.it ping statistics ---
3 packets transmitted, 0 packets received, 100% packet loss
My hostname is ciao.singles.it.
# ping ciao=20
PING ciao.singles.it (10.0.0.2): 56 data bytes
ping: sendto: Permission denied
ping: sendto: Permission denied
^C
--- ciao.singles.it ping statistics ---
4 packets transmitted, 0 packets received, 100% packet loss
Somebody can help ?
For your convenience,I include output from
uname-a, the messages of the kernel at boot time=20
(output of the command 'dmesg') and the main configuration file
/etc/rc.conf.
Thank you all
Bruno
-------------------------------------------------------------------------=
----------------------------------------
-------------------------------------------------------------------------=
----------------------------------------
OUTPUT OF UNAME -A:
FreeBSD ciao.singles.it 4.2-RELEASE FreeBSD 4.2-RELEASE #0: Sun Mar 9 =
19:00:35 CET 2003 =
root@presto.example.org:/usr/src/sys/compile/CURRENT_WINE i386
-------------------------------------------------------------------------=
----------------------------------------
THE MESSAGES OF THE KERNEL AT BOOT TIME (OUTPUT OF 'DMESG')
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.2-RELEASE #0: Sun Mar 9 19:00:35 CET 2003
root@presto.example.org:/usr/src/sys/compile/CURRENT_WINE
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD Duron(tm) Processor (701.25-MHz 686-class CPU)
Origin =3D "AuthenticAMD" Id =3D 0x631 Stepping =3D 1
=
Features=3D0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,=
CMOV,PAT,PSE36,MMX,FXSR>
AMD Features=3D0xc0440000<<b18>,AMIE,DSP,3DNow!>
real memory =3D 268435456 (262144K bytes)
avail memory =3D 257523712 (251488K bytes)
Preloaded elf kernel "kernel" at 0xc03cc000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=3D1106 device=3D8305)> at device 1.0 =
on pci0
pci1: <PCI bus> on pcib1
pci1: <NVidia Riva Ultra Vanta TNT2 graphics accelerator> at 0.0 irq 3
rl0: <RealTek 8139 10/100BaseTX> port 0x1800-0x18ff mem =
0x44000000-0x440000ff irq 3 at device 3.0 on pci0
rl0: Ethernet address: 00:06:4f:01:a1:d1
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <unknown card> (vendor=3D0x14f1, dev=3D0x1033) at 4.0 irq 10
isab0: <VIA 82C686 PCI-ISA bridge> at device 20.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA66 controller> port 0x1440-0x144f at device 20.1 =
on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0x1400-0x141f irq 11 at device =
20.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0x1420-0x143f irq 11 at device =
20.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ulpt0: Canon S100, rev 1.00/1.00, addr 2, iclass 7/1
chip1: <VIA 82C686 ACPI interface> at device 20.4 on pci0
pcm0: <VIA VT82C686A AC'97 Audio> port =
0x145c-0x145f,0x1458-0x145b,0x1000-0x10ff irq 10 at device 20.5 on pci0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on =
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on =
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
joy0 at port 0x201 on isa0
IP packet filtering initialized, divert disabled, rule-based forwarding =
disabled, default to deny, logging disabled
ad0: 29198MB <SAMSUNG SV3063H> [59323/16/63] at ata0-master UDMA66
ata1-master: DMA limited to UDMA33, non-ATA66 compliant cable
ad2: 39083MB <Maxtor 4D040H2> [79408/16/63] at ata1-master UDMA33
ad3: 2103MB <CASTLEWOOD ORB2-E> [4273/16/63] at ata1-slave WDMA2
Mounting root from ufs:/dev/ad2s1a
ad2s2: rejecting partition in BSD label: it isn't entirely within the =
slice
ad2s2: start 61432560, end 80043263, size 18610704
ad2s2d: start 0, end 80043263, size 80043264
-------------------------------------------------------------------------=
----------------------------------------
AND THE MAIN CONFIGURATION FILE /ETC/RC.CONF
# This file now contains just the overrides from /etc/defaults/rc.conf
# please make all changes to this file.
#
hostname=3D"ciao.singles.it" # Set this!
firewall_enable=3D"NO" # Set to YES to enable firewall =
functionality
firewall_type=3D"client" # Firewall type (see /etc/rc.firewall)
firewall_script=3D"/etc/rc.firewall" # Which script to run to set up the =
firewall
firewall_quiet=3D"NO" # Set to YES to suppress rule display
firewall_logging=3D"YES" # Set to YES to enable events logging
firewall_flags=3D"" # Flags passed to ipfw when type is a =
file
natd_enable=3D"NO" # Enable natd (if firewall_enable =
=3D=3D YES).
natd_interface=3D"tun0" # Public interface or IPaddress to =
use.
#
# Network Time Services options:
ntpdate_enable=3D"YES"
ntpdate_flags=3D"ntps1-0.uni-erlangen.de"
xntpd_enable=3D"YES" # Run ntpd Network Time Protocol (or =
NO).
#xntpd_program=3D"ntpd" # path to ntpd, if you want a =
different one.
xntpd_flags=3D"-p /var/run/ntpd.pid" # Flags to ntpd (if enabled).
#
dumpdev=3D/dev/ad0s1b # Device name to crashdump to (or NO).
#
clear_tmp_enable=3D"YES" # Clear /tmp at startup.=20
# Disable the router program, due to ppp configuration (see the =
handbook)
#router_enable=3D"NO"
#
# Enable network daemons for user convenience.
network_interfaces=3D"sl0 lo0 rl0" # List of network interfaces (or =
"auto").
ifconfig_lo0=3D"inet 127.0.0.1" # default loopback device =
configuration.
#ifconfig_rl0=3D"inet 212.216.112.112 212.216.172.62 netmask =
255.255.255.0" =20
ifconfig_rl0=3D"inet 10.0.0.2 netmask 255.255.255.0"
# If you have any sppp(4) interfaces above, you might also want to set
# the following parameters. Refer to spppcontrol(8) for their meaning.
sppp_interfaces=3D"ugen0" # example: sppp over ISDN
spppconfig_ugen0=3D"authproto=3Dchap myauthname=3Dxxx =
myauthsecret=3Dyyyy hisauthname=3Dsome-gw hisauthsecret=3D'another =
secret'"
### ISDN interface options: ###
isdn_enable=3D"NO" # Enable the ISDN subsystem (or NO).
isdn_fsdev=3D"/dev/ttyv4" # Output device for fullscreen mode (or NO =
for daemon mode).
isdn_flags=3D"-dn -d0x1f9" # Flags for isdnd
isdn_trace=3D"NO" # Enable the ISDN trace subsystem (or NO).
isdn_traceflags=3D"-f /var/tmp/isdntrace0" # Flags for isdntrace
# -- sysinstall generated deltas -- #
moused_enable=3D"YES"
moused_flags=3D""
linux_enable=3D"YES"
sendmail_enable=3D"YES"
sendmail_flags=3D"-bd -q30m" # Flags to sendmail (if enabled)
saver=3D"logo"
font8x8=3D"iso-8x8"
font8x14=3D"iso-8x14"
font8x16=3D"iso-8x16"
keymap=3D"it.iso"
sshd_enable=3D"YES"
portmap_enable=3D"YES"
nfs_server_enable=3D"YES"
nfs_client_enable=3D"YES"
inetd_enable=3D"YES"
usbd_enable=3D"YES"
usbd_flags=3D"" # Flags to usbd (if enabled).
nfs_reserved_port_only=3D"YES"
accounting_enable=3D"YES"
apm_enable=3D"YES"
firewall=3D"open"
#
### Network routing options: ###
router_enable=3D"NO"
defaultrouter=3D"10.0.0.2"
static_routes=3D"" # Set to static route list (or leave =
empty).
#rand_irqs=3D"5 11" # Stir the entropy pool (like "5 11" or =
NO).
kern_securelevel_enable=3D"NO" # kernel security level (see init(8)),
kern_securelevel=3D"-1" # range: -1..3 ; `-1' is the most insecure
# User ppp configuration.
ppp_enable=3D"YES" # Start user-ppp (or NO).
ppp_mode=3D"auto" # Choice of "auto", "ddial", "direct" or "dedicated".
# For details see man page for ppp(8). Default is auto.
ppp_nat=3D"YES" # Use PPP's internal network address translation or NO.
ppp_profile=3D"papchap" # Which profile to use from /etc/ppp/ppp.conf.
ppp_user=3D"root" # Which user to run ppp as
---
[Quipo ISP - Questa E-mail e' stata controllata dal programma Declude Virus]
[Quipo ISP - This E-mail was scanned for viruses by Declude Virus]
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?007001c38b45$4f1b4f60$c90e5e3e>