Date: Mon, 27 Jul 1998 11:54:19 +0200 From: "Michel-Ange CAMHI" <macamhi@atos-group.com> To: "Keith Jones" <keith@blueberry.co.uk> Cc: <questions@FreeBSD.ORG> Subject: Re: [2.2.7-stable] kernel not compiling without SCSI in the config Message-ID: <00e901bdb944$87515150$150212ac@env-pc3.segin.com>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] -----Message d'origine----- De : Keith Jones <keith@blueberry.co.uk> À : Michel-Ange CAMHI <macamhi@atos-group.com> Cc : questions@FreeBSD.ORG <questions@FreeBSD.ORG> Date : lundi 27 juillet 1998 11:34 Objet : Re: [2.2.7-stable] kernel not compiling without SCSI in the config >On Mon, Jul 27, 1998 at 01:42:28AM +0200, Michel-Ange CAMHI wrote: > >> I removed every reference to the SCSI peripherals in my config file (MYKERNEL260798) as i have none in my box. > >You missed one..... ;) >at a guess, this: > >> options SCSI_DELAY=15 #Be pessimistic about Joe SCSI device good idea, commented, but still the same errors: loading kernel tek390.o: Undefined symbol `_scsi_done' referenced from text segment tek390.o: Undefined symbol `_scsi_done' referenced from text segment tek390.o: Undefined symbol `_scsi_alloc_bus' referenced from text segment tek390.o: Undefined symbol `_scsi_attachdevs' referenced from text segment *** Error code 1 Maybe i removed too much? I'll be building another file soon. Any other ideas, though? [-- Attachment #2 --] # # MYKERNEL260798 - compilé par LeMac (macamhi@atos-group.com) le 27/07/98 # pour K6-200 / IDE / SBPro etc... # # For more information read the handbook part System Administration -> # Configuring the FreeBSD Kernel -> The Configuration File. # The handbook is available in /usr/share/doc/handbook or online as # latest version from the FreeBSD World Wide Web server # <URL:http://www.FreeBSD.ORG/>; # # An exhaustive list of options and more detailed explanations of the # device lines is present in the ./LINT configuration file. If you are # in doubt as to the purpose or necessity of a line, check first in LINT. # # $Id: GENERIC,v 1.77.2.25 1998/07/20 20:11:04 msmith Exp $ machine "i386" cpu "I586_CPU" ident "MYKERNEL260798" maxusers 10 options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options FFS #Berkeley Fast Filesystem options NFS #Network Filesystem options MSDOSFS #MSDOS Filesystem options "CD9660" #ISO 9660 Filesystem options PROCFS #Process filesystem options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] #options SCSI_DELAY=15 #Be pessimistic about Joe SCSI device options BOUNCE_BUFFERS #include support for DMA bounce buffers options UCONSOLE #Allow users to grab the console options FAILSAFE #Be conservative options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor config kernel root on wd0 controller isa0 controller eisa0 controller pci0 controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr disk fd0 at fdc0 drive 0 #disk fd1 at fdc0 drive 1 # Unless you know very well what you're doing, leave ft0 at drive 2, or # remove the line entirely if you don't need it. Trying to configure # it on another unit might cause surprises, see PR kern/7176. #tape ft0 at fdc0 drive 2 options "CMD640" # work around CMD640 chip deficiency controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr disk wd0 at wdc0 drive 0 disk wd1 at wdc0 drive 1 controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr disk wd2 at wdc1 drive 0 disk wd3 at wdc1 drive 1 options ATAPI #Enable ATAPI support for IDE bus options ATAPI_STATIC #Don't do it as an LKM device wcd0 #IDE CD-ROM device wfd0 #IDE floppy (LS-120) # A single entry for any of these controllers (ncr, ahb, ahc, amd) is # sufficient for any number of installed devices. controller amd0 #controller dpt0 #options DPT_MEASURE_PERFORMANCE # Required by DPT driver?? #options DPT_VERIFY_HINTR # Some hardware must have it! #options DPT_TRACK_CCB_STATES # Some hardware must have it! #options DPT_HANDLE_TIMEOUTS # Some hardware must have it! #options DPT_TIMEOUT_FACTOR=4 # Some hardware needs more #device od0 #See LINT for possible `od' options. # syscons is the default console driver, resembling an SCO console device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? port "IO_KBD" tty irq 1 vector pcrint #options XSERVER # support for X server #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std # Mandatory, don't remove device npx0 at isa? port "IO_NPX" flags 0x1 irq 13 vector npxintr # # Laptop support (see LINT for more options) # #device apm0 at isa? disable # Advanced Power Management #options APM_BROKEN_STATCLOCK # Workaround some buggy APM #BIOS # PCCARD (PCMCIA) support #controller card0 #device pcic0 at card? #device pcic1 at card? device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr device sio2 at isa? disable port "IO_COM3" tty irq 5 vector siointr device sio3 at isa? disable port "IO_COM4" tty irq 9 vector siointr device lpt0 at isa? port? tty irq 7 vector lptintr #device lpt1 at isa? port? tty #device mse0 at isa? port 0x23c tty irq 5 vector mseintr #device psm0 at isa? port "IO_KBD" conflicts tty irq 12 #vector psmintr # Order is important here due to intrusive probes, do *not* alphabetize # this list of network interfaces until the probes have been fixed. # Right now it appears that the ie0 must be probed before ep0. See # revision 1.20 of this file. device ed0 at isa? port 0x300 net irq 11 iomem 0xd8000 vector edintr pseudo-device loop pseudo-device ether pseudo-device log pseudo-device sl 10 pseudo-device ppp 10 pseudo-device vn 1 pseudo-device tun 10 pseudo-device pty 64 pseudo-device gzip # Exec gzipped a.out's pseudo-device bpfilter 1 pseudo-device speaker # Sound card support controller snd0 device sb0 at isa? port0x200 irq 5 drq 1 vector sbintr options "SBC_IRQ=5" # KTRACE enables the system-call tracing facility ktrace(2). # This adds 4 KB bloat to your kernel, and slightly increases # the costs of each syscall. options KTRACE #kernel tracing # This provides support for System V shared memory. # options SYSVSHM
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?00e901bdb944$87515150$150212ac>