Date: Wed, 31 Jan 2001 22:57:45 -0800 From: Gunnar H Reichert-Weygold <gunnar@paganlibrary.com> To: freebsd-questions@FreeBSD.ORG Subject: Promise ATA100 Card Resets Message-ID: <01013123083400.10394@gunnar.weygold.edu> In-Reply-To: <20000219095643.B328@marder-1> References: <001301bf7a8b$00b3f620$a27b403f@ronaldjr> <20000219094604.A328@marder-1> <20000219095643.B328@marder-1>
next in thread | previous in thread | raw e-mail | index | archive | help
-----BEGIN PGP SIGNED MESSAGE----- My Promise Ultra100 ATA card is generating the following errors during any large copies to the drive: Jan 31 22:33:01 gunnar /kernel: ad4: WRITE command timeout tag=0 serv=0 - resetting Jan 31 22:33:01 gunnar /kernel: ad4: WRITE command timeout tag=0 serv=0 - resetting Jan 31 22:33:01 gunnar /kernel: ata2: resetting devices .. done Jan 31 22:33:01 gunnar /kernel: ata2: resetting devices .. done Theses errors pop up every 30 seconds or so during long, sustained copies. The hardware setup is thus: ad1 is the FreeBSD boot drive. It is Ultra 4, throttled down to Ultra 2 since the onboard bios won't handle Ultra 4. ad4 is ufs drive connected to the Promise card. This is a Ultra 2 drive. It was recently returned from repair and it and the new Promise card are being torture-tested before being put into production. The Promise card and ad4 were just installed in a system that has been running perfectly. Kernel ATA options are enabled and everything has been flawless. Any suggestions? Uname -a: FreeBSD gunnar.weygold.edu 4.2-RELEASE FreeBSD 4.2-RELEASE #0: Wed Jan 17 19:32:16 PST 2001 root@gunnar.weygold.edu:/usr/src/sys/compile/FREEBIE i386 Edited dmesg: CPU: Pentium II/Pentium II Xeon/Celeron (334.09-MHz 686-class CPU) real memory = 201326592 (196608K bytes) pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 intpm0: <Intel 82371AB Power management controller> port 0x5000-0x500f irq 9 at device 7.3 on pci0 intpm0: I/O mapped 5000 intpm0: intr IRQ 9 enabled revision 0 smbus0: <System Management Bus> on intsmb0 smb0: <SMBus general purpose I/O> on smbus0 intpm0: PM I/O mapped 4000 smbus1: <System Management Bus> on bti2c0 smb1: <SMBus general purpose I/O> on smbus1 atapci1: <Promise ATA100 controller> port 0xb400-0xb43f,0xb000-0xb003,0xac00-0xac07,0xa800-0xa803,0xa400-0xa407 mem 0xee000000-0xee01ffff irq 9 at device 15.0 on pci0 ata2: at 0xa400 on atapci1 ata3: at 0xac00 on atapci1 ad0: 4103MB <ST34321A> [8894/15/63] at ata0-master UDMA33 ad1: 12419MB <ST313032A> [25232/16/63] at ata0-slave UDMA33 ad4: 4103MB <ST34321A> [8894/15/63] at ata2-master UDMA33 acd0: CDROM <CD-ROM 48X/AKU> at ata1-master using PIO4 acd1: CD-RW <CRW6206A> at ata1-slave using WDMA2 -----BEGIN PGP SIGNATURE----- Version: PGP 6.5.1i iQEVAwUBOnkLeKUyhWcFZj/lAQH/bAf/f3C0fACQFxjv4GS9ihYSOEe2HpJnDNpj HISvou5wTaTZ5wutBf6cjArHWR1aKR+Mw5G8+YVGSHqIKkCQ+j5eIzW6g8uLA2zp CXlB7eYecTzalsunoHfYFCQMLEv7ohtueRLsmJSuKt+q7PL0NdCmtTg5Gn0+Q8GQ I9qxqoCZOWkpYoQu3O50c1+kx5+oGNe/4YC5Z2j6aqQzGmWot18rAkE9ByVQ1StF +D3FfvepMvE5dVuz8rjCNVVWYOnSH8MkNfd1MGCdRXfRtcNxrjeK/fCr/frZO0/8 d6BmLvGMJbqPkrZncw3SUGXaz2xmLat1lpXUpuhm2PTCSXfLVgRKsg== =iUkU -----END PGP SIGNATURE----- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?01013123083400.10394>