Date: Sat, 27 Jul 2002 14:19:34 +0200 From: "Dave Raven" <dave@raven.za.net> To: <freebsd-isdn@freebsd.org> Subject: USR card Message-ID: <014901c23567$dead5400$0200a8c0@lucy>
next in thread | raw e-mail | index | archive | help
Hi all,
I've just bought an ISDN card (USRobotics Internal 128 TA).
It is supported by BSD and I have these options in my kernel:
options USR_STI
device isic0 at isa? port 0x268 irq 12 flags 7
options IPR_VJ
options IPR_LOG=32
pseudo-device "i4bq921"
pseudo-device "i4bq931"
pseudo-device "i4b"
pseudo-device "i4btrc" 4
pseudo-device "i4bctl"
pseudo-device "i4brbch" 4
pseudo-device "i4btel" 2
pseudo-device "i4bipr" 4
I have also tried with the irq set to 5 (default)
However, when I boot I see this:
.
pci1: <unknown card> (vendor=0x1050, dev=0x6692) at 5.0 irq 12
.
.
.
isic0: HSCX VSTR test failed for USR Sportster TA
isic0: HSC0: VSTR: 0xff
isic0: HSC1: VSTR: 0xff
i4brbch: 4 raw B channel access device(s) attached
i4bipr: 4 IP over raw HDLC ISDN device(s) attached (VJ header compression)
i4bctl: ISDN system control port attached
i4btrc: 4 ISDN trace device(s) attached
i4b: ISDN call control device attached
i4btel: 2 ISDN telephony interface device(s) attached
.
Can anyone help me with this please? Or just point me in
the right direction as I know very little about ISDN...
p.s Please copy me on any mail about this, as I'm not currently
a subscriber to the list.
Thanks,
Dave Raven.
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-isdn" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?014901c23567$dead5400$0200a8c0>