Date: Sat, 5 Sep 1998 15:21:12 +0400 From: "Sergei M.Klimkin" <serega@elkatel.ru> To: <freebsd-questions@FreeBSD.ORG> Subject: a ppp -question Message-ID: <01bdd8bf$4b0f77e0$0100a8c0@ondorm.elkatel.ru>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] Hi there! I've got some trouble with ppp I did all setting as you discribe in Handbook! comp# ppp ppp on comp>dial elkatel -that is my ISP dial ok login ok ppp on comp>packet mode But nothing work! In my log file I foung only one error! Following lines taked after login ok! tun0: Connect: annex: tun0: Chat: Sending: ppp^M tun0: IPCP: Using trigger address 0.0.0.0 tun0: LCP: State change Initial --> Closed tun0: LCP: State change Closed --> Stopped tun0: LCP: Received Configure Request (1) state = Stopped (3) tun0: LCP: ACCMAP[6] 0x00000000 tun0: LCP: AUTHPROTO[4] 0xc023 (PAP) tun0: LCP: MAGICNUM[6] 0x0ea7494b tun0: LCP: PROTOCOMP[2] tun0: LCP: ACFCOMP[2] tun0: LCP: LcpSendConfigReq tun0: LCP: ACFCOMP[2] tun0: LCP: PROTOCOMP[2] tun0: LCP: ACCMAP[6] 0x00000000 tun0: LCP: MRU[4] 1500 tun0: LCP: MAGICNUM[6] 0x34eae06e tun0: LCP: SendConfigAck(Stopped) tun0: LCP: ACCMAP[6] 0x00000000 tun0: LCP: AUTHPROTO[4] 0xc023 (PAP) tun0: LCP: MAGICNUM[6] 0x0ea7494b tun0: LCP: PROTOCOMP[2] tun0: LCP: ACFCOMP[2] tun0: LCP: State change Stopped --> Ack-Sent tun0: LCP: Received Configure Ack (1) state = Ack-Sent (8) tun0: LCP: State change Ack-Sent --> Opened tun0: LCP: LcpLayerUp tun0: Phase: NewPhase: Authenticate tun0: Phase: his = PAP, mine = none tun0: Phase: PAP: serega tun0: Phase: PapInput: ACK tun0: Phase: Received PAP_ACK () tun0: Phase: NewPhase: Network tun0: IPCP: State change Initial --> Closed tun0: IPCP: IPCP Up event!! tun0: IPCP: IpcpSendConfigReq tun0: IPCP: IPADDR[6] 0.0.0.0 tun0: IPCP: COMPPROTO[6] 16 VJ slots with slot compres tun0: IPCP: State change Closed --> Req-Sent tun0: CCP: State change Initial --> Closed tun0: CCP: CCP Up event!! tun0: CCP: CcpSendConfigReq tun0: CCP: DEFLATE[4] win 15 tun0: CCP: PRED1[2] tun0: CCP: State change Closed --> Req-Sent tun0: IPCP: Received Configure Request (3) state = Req-Sent (6) tun0: IPCP: COMPPROTO[6] 16 VJ slots with slot compression tun0: IPCP: IPADDR[6] 195.18.32.4 tun0: IPCP: SendConfigAck(Req-Sent) tun0: IPCP: COMPPROTO[6] 16 VJ slots with slot compression tun0: IPCP: IPADDR[6] 195.18.32.4 tun0: IPCP: State change Req-Sent --> Ack-Sent tun0: Phase: Unknown protocol 0x802b (Novell IPX Control Protocol) tun0: LCP: LcpSendProtoRej tun0: IPCP: Received Configure Nak (1) state = Ack-Sent (8) tun0: IPCP: IPADDR[6] 195.18.34.23 tun0: IPCP: IPADDR[6] changing address: 0.0.0.0 --> 195.18.34.23 tun0: IPCP: IpcpSendConfigReq tun0: IPCP: IPADDR[6] 195.18.34.23 tun0: IPCP: COMPPROTO[6] 16 VJ slots with slot compres tun0: CCP: Received Configure Reject (1) state = Req-Sent (6) tun0: CCP: RecvConfigRej. tun0: CCP: DEFLATE[4] tun0: CCP: CcpSendConfigReq tun0: CCP: PRED1[2] tun0: IPCP: Received Configure Ack (2) state = Ack-Sent (8) tun0: IPCP: State change Ack-Sent --> Opened tun0: IPCP: IpcpLayerUp(9). tun0: IPCP: myaddr = 195.18.34.23 hisaddr = 195.18.32.4 tun0: LCP: OsLinkup: 195.18.32.4 tun0: Command: elkatel: delete ALL tun0: Command: elkatel: add 0 0 HISADDR tun0: CCP: Received Configure Ack (2) state = Req-Sent (6) tun0: CCP: State change Req-Sent --> Ack-Rcvd tun0: CCP: Received Terminate Request (5) state = Ack-Rcvd (7) tun0: CCP: CcpSendTerminateAck tun0: CCP: State change Ack-Rcvd --> Req-Sent tun0: Phase: HDLC errors -> FCS: 16 ADDR: 0 COMD: 0 PROTO: 1 -What's that mean???? tun0: Phase: HDLC errors -> FCS: 5 ADDR: 0 COMD: 0 PROTO: 0 -What's that mean???? tun0: Phase: HDLC errors -> FCS: 15 ADDR: 0 COMD: 0 PROTO: 0 -What's that mean???? tun0: Phase: Idle timer expired. tun0: Phase: NewPhase: Terminate tun0: IPCP: OsLinkdown: 195.18.32.4 tun0: IPCP: IpcpLayerDown. tun0: IPCP: Connect time: 237 secs: 0 octets in, 1596 octets out tun0: IPCP: total 6 bytes/sec tun0: IPCP: State change Opened --> Starting tun0: CCP: State change Req-Sent --> Starting tun0: Command: MYADDR: !bg /usr/X11R6/bin/auplay /etc/ppp/linkdown.au tun0: LCP: LcpLayerDown tun0: LCP: SendTerminateReq. tun0: LCP: State change Opened --> Closing tun0: LCP: Received Terminate Ack (2) state = Closing (4) tun0: LCP: State change Closing --> Closed tun0: LCP: LcpLayerFinish tun0: Phase: Modem: Connect time: 308 secs: 9310 octets in, 2023 octets out tun0: Phase: total 36 bytes/sec tun0: Phase: NewPhase: Dead tun0: IPCP: Using trigger address 0.0.0.0 tun0: Command: quit tun0: Phase: PPP Terminated (normal). Help me in that possible! Thanks [-- Attachment #2 --] <!DOCTYPE HTML PUBLIC "-//W3C//DTD W3 HTML//EN"> <HTML> <HEAD> <META content=text/html;charset=koi8-r http-equiv=Content-Type> <META content='"MSHTML 4.71.1712.3"' name=GENERATOR> </HEAD> <BODY bgColor=#c0c0c0> <DIV><FONT color=#000000 size=2>Hi there!</FONT></DIV> <DIV><FONT size=2>I've got some trouble with ppp</FONT></DIV> <DIV><FONT size=2>I did all setting as you discribe in Handbook!</FONT> </DIV> <DIV><FONT color=#000000 size=2></FONT> </DIV> <DIV><FONT color=#000000 size=2>comp# ppp</FONT></DIV> <DIV><FONT color=#000000 size=2>ppp on comp>dial elkatel -that is my ISP</FONT> </DIV> <DIV><FONT color=#000000 size=2></FONT><FONT size=2>dial ok</FONT></DIV> <DIV><FONT size=2>login ok</FONT></DIV> <DIV><FONT size=2>ppp on comp>packet mode</FONT> </DIV> <DIV><FONT size=2></FONT><FONT color=#000000 size=2>But nothing work!</FONT></DIV> <DIV><FONT color=#000000 size=2></FONT> </DIV> <DIV><FONT size=2>In my log file I foung only one error!</FONT></DIV> <DIV><FONT size=2></FONT><FONT color=#000000 size=2>Following lines taked after login ok!<BR></FONT><FONT color=#000000 size=2></FONT> </DIV> <DIV><FONT color=#000000 size=2>tun0: Connect: annex: <BR>tun0: Chat: Sending: ppp^M <BR>tun0: IPCP: Using trigger address 0.0.0.0 <BR>tun0: LCP: State change Initial --> Closed <BR>tun0: LCP: State change Closed --> Stopped <BR>tun0: LCP: Received Configure Request (1) state = Stopped (3) <BR>tun0: LCP: ACCMAP[6] 0x00000000 <BR>tun0: LCP: AUTHPROTO[4] 0xc023 (PAP) <BR>tun0: LCP: MAGICNUM[6] 0x0ea7494b <BR>tun0: LCP: PROTOCOMP[2] <BR>tun0: LCP: ACFCOMP[2] <BR>tun0: LCP: LcpSendConfigReq <BR>tun0: LCP: ACFCOMP[2] <BR>tun0: LCP: PROTOCOMP[2] <BR>tun0: LCP: ACCMAP[6] 0x00000000 <BR>tun0: LCP: MRU[4] 1500 <BR>tun0: LCP: MAGICNUM[6] 0x34eae06e <BR>tun0: LCP: SendConfigAck(Stopped) <BR>tun0: LCP: ACCMAP[6] 0x00000000 <BR>tun0: LCP: AUTHPROTO[4] 0xc023 (PAP) <BR>tun0: LCP: MAGICNUM[6] 0x0ea7494b <BR>tun0: LCP: PROTOCOMP[2] <BR>tun0: LCP: ACFCOMP[2] <BR>tun0: LCP: State change Stopped --> Ack-Sent <BR>tun0: LCP: Received Configure Ack (1) state = Ack-Sent (8) <BR>tun0: LCP: State change Ack-Sent --> Opened <BR>tun0: LCP: LcpLayerUp <BR>tun0: Phase: NewPhase: Authenticate <BR>tun0: Phase: his = PAP, mine = none <BR>tun0: Phase: PAP: serega <BR>tun0: Phase: PapInput: ACK <BR>tun0: Phase: Received PAP_ACK () <BR>tun0: Phase: NewPhase: Network <BR>tun0: IPCP: State change Initial --> Closed <BR>tun0: IPCP: IPCP Up event!! <BR>tun0: IPCP: IpcpSendConfigReq <BR>tun0: IPCP: IPADDR[6] 0.0.0.0 <BR>tun0: IPCP: COMPPROTO[6] 16 VJ slots with slot compres <BR>tun0: IPCP: State change Closed --> Req-Sent <BR>tun0: CCP: State change Initial --> Closed <BR>tun0: CCP: CCP Up event!! <BR>tun0: CCP: CcpSendConfigReq <BR>tun0: CCP: DEFLATE[4] win 15 <BR>tun0: CCP: PRED1[2] <BR>tun0: CCP: State change Closed --> Req-Sent <BR>tun0: IPCP: Received Configure Request (3) state = Req-Sent (6) <BR>tun0: IPCP: COMPPROTO[6] 16 VJ slots with slot compression <BR>tun0: IPCP: IPADDR[6] 195.18.32.4 <BR>tun0: IPCP: SendConfigAck(Req-Sent) <BR>tun0: IPCP: COMPPROTO[6] 16 VJ slots with slot compression <BR>tun0: IPCP: IPADDR[6] 195.18.32.4 <BR>tun0: IPCP: State change Req-Sent --> Ack-Sent <BR>tun0: Phase: Unknown protocol 0x802b (Novell IPX Control Protocol) <BR>tun0: LCP: LcpSendProtoRej <BR>tun0: IPCP: Received Configure Nak (1) state = Ack-Sent (8) <BR>tun0: IPCP: IPADDR[6] 195.18.34.23 <BR>tun0: IPCP: IPADDR[6] changing address: 0.0.0.0 --> 195.18.34.23 <BR>tun0: IPCP: IpcpSendConfigReq <BR>tun0: IPCP: IPADDR[6] 195.18.34.23 <BR>tun0: IPCP: COMPPROTO[6] 16 VJ slots with slot compres <BR>tun0: CCP: Received Configure Reject (1) state = Req-Sent (6) <BR>tun0: CCP: RecvConfigRej. <BR>tun0: CCP: DEFLATE[4] <BR>tun0: CCP: CcpSendConfigReq <BR>tun0: CCP: PRED1[2] <BR>tun0: IPCP: Received Configure Ack (2) state = Ack-Sent (8) <BR>tun0: IPCP: State change Ack-Sent --> Opened <BR>tun0: IPCP: IpcpLayerUp(9). <BR>tun0: IPCP: myaddr = 195.18.34.23 hisaddr = 195.18.32.4 <BR>tun0: LCP: OsLinkup: 195.18.32.4 <BR>tun0: Command: elkatel: delete ALL <BR>tun0: Command: elkatel: add 0 0 HISADDR <BR>tun0: CCP: Received Configure Ack (2) state = Req-Sent (6) <BR>tun0: CCP: State change Req-Sent --> Ack-Rcvd <BR>tun0: CCP: Received Terminate Request (5) state = Ack-Rcvd (7) <BR>tun0: CCP: CcpSendTerminateAck <BR>tun0: CCP: State change Ack-Rcvd --> Req-Sent <BR>tun0: Phase: HDLC errors -> FCS: 16 ADDR: 0 COMD: 0 PROTO: 1 -What's that mean????<BR>tun0: Phase: HDLC errors -> FCS: 5 ADDR: 0 COMD: 0 PROTO: 0 -What's that mean????<BR>tun0: Phase: HDLC errors -> FCS: 15 ADDR: 0 COMD: 0 PROTO: 0 -What's that mean????<BR>tun0: Phase: Idle timer expired. <BR>tun0: Phase: NewPhase: Terminate <BR>tun0: IPCP: OsLinkdown: 195.18.32.4 <BR>tun0: IPCP: IpcpLayerDown. <BR>tun0: IPCP: Connect time: 237 secs: 0 octets in, 1596 octets out <BR>tun0: IPCP: total 6 bytes/sec <BR>tun0: IPCP: State change Opened --> Starting <BR>tun0: CCP: State change Req-Sent --> Starting <BR>tun0: Command: MYADDR: !bg /usr/X11R6/bin/auplay /etc/ppp/linkdown.au <BR>tun0: LCP: LcpLayerDown <BR>tun0: LCP: SendTerminateReq. <BR>tun0: LCP: State change Opened --> Closing <BR>tun0: LCP: Received Terminate Ack (2) state = Closing (4) <BR>tun0: LCP: State change Closing --> Closed <BR>tun0: LCP: LcpLayerFinish <BR>tun0: Phase: Modem: Connect time: 308 secs: 9310 octets in, 2023 octets out <BR>tun0: Phase: total 36 bytes/sec <BR>tun0: Phase: NewPhase: Dead <BR>tun0: IPCP: Using trigger address 0.0.0.0 <BR>tun0: Command: quit <BR>tun0: Phase: PPP Terminated (normal).</FONT> </DIV> <DIV><FONT color=#000000 size=2></FONT> </DIV> <DIV><FONT size=2>Help me in that possible!<BR>Thanks</FONT> </DIV> <DIV><FONT size=2></FONT> </DIV></BODY></HTML>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?01bdd8bf$4b0f77e0$0100a8c0>