Date: Mon, 25 Feb 2002 13:03:26 -0800 From: 72yan M <freedom@72oot.net> To: deanb@unm.edu, freebsd-questions@FreeBSD.ORG Subject: Re: ibm serveraid driver questions Message-ID: <02022513032600.80823@c1529030-a.attbi.com> In-Reply-To: <3C7A8D87.3AF9F1C0@unm.edu> References: <3C7A8D87.3AF9F1C0@unm.edu>
next in thread | previous in thread | raw e-mail | index | archive | help
Hello, The Adaptec 7895 should be aic0. You could look at Intel.com for any bios/firmware upgrades for the Motherboard. I know that the l440GX+ does not require the update, but it does improve the reliability. Also check that the HardDrives are hooked up to the SCSI connector and that any other devices, are on a seperate channel. SCSI will default to the slowest device on the channel. The error you are getting is that "no drives were found for the install"? 72yan M > I have an IBM Netfinity 5000 (dual pentium II's, IBM ServeRAID, > scsi tape-drive, IBM fault tolerant network card) that needs > to be a development server. As far as I can tell the correct > driver for the raid (adaptec aic7895 on board scsi controller) > ought to be ahc(4). It does not seem to be part of the > freeBSD 4.4 install cd or the freeBSD 4.5 install cd. > > Debian 2.2.19 autodetected and installed, but before I give up > on freeBSD can somebody help me out? > > I am really a web/database developer trying to set up a system. > Any help would be appreciated. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?02022513032600.80823>