Date: Fri, 1 Dec 2006 15:46:36 +0800 (CST) From: Tai-hwa Liang <avatar@mmlab.cse.yzu.edu.tw> To: Pyun YongHyeon <pyunyh@gmail.com> Cc: freebsd-current@FreeBSD.org Subject: Re: Call for e1000phy(4) testers. Message-ID: <0612011540189.97361@www.mmlab.cse.yzu.edu.tw> In-Reply-To: <20061128115538.GB66517@cdnetworks.co.kr> References: <20061128115538.GB66517@cdnetworks.co.kr>
next in thread | previous in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] On Tue, 28 Nov 2006, Pyun YongHyeon wrote: > Hi, > > I had been writing msk(4) for FreeBSD and realized that e1000phy(4) > is buggy on newer Marvell PHYs. For example, manual media selection > didn't work at all and I had to stick to autoselection of the media > type. The Marvell PHYs are widely used on various NICs including > em(4), stge(4), sk(4), msk(4) and nfe(4). Except em(4) which does > not support MII layers, correct operation of e1000phy(4) is very > important to get a good link with link partner and to report link > state changes to upper layers(e.g. dhclinet(8)). Thank you for working on this. > With this patch you should be able to set a media type without > relying on autoselection and it should supports automatic crossover > for all known Marvell PHYs. I've tried hard not to break existing > behaviour(e.g. Fiber transceivers) but I can't verify that as I > don't have any NICs that have Marvell Fiber transceivers. The patch > is somewhat ugly in that it should read a PHY ID register in several > palces. It seems that there is no easy way to avoid the reading until > we have PHY model/revision numbers in mii softc. > > If you are one of users that use stge(4), sk(4), msk(4) and nfe(4) > please test and report any strange things not observed on stock > version. > > Note for nfe(4) users: > It seems that nfe(4) has bugs that it can't send packets on > half-duplex media(I've got "tx v1 error 0x6004"). I guess this comes > from mismatches between PHY and MAC. So you may have to set > full-duplex on nfe(4) until we have a fix for the issue. > > You can get the latest e1000phy(4) driver from the following URL. > http://people.freebsd.org/~yongari/msk/e1000phy.c > http://people.freebsd.org/~yongari/msk/e1000phyreg.h > http://people.freebsd.org/~yongari/msk/miidevs > > OR get a jumbo patch for CURRENT. > http://people.freebsd.org/~yongari/msk/e1000phy.patch I have tried your e1000phy patch as well as msk.diff.HEAD on an Acer Aspire 5583 WXMi laptop: mskc0@pci2:0:0: class=0x020000 card=0x01101025 chip=0x435211ab rev=0x14 hdr=0x00 vendor = 'Marvell Semiconductor (Was: Galileo Technology Ltd)' class = network subclass = ethernet It seems that device_attach always returns 6 regardless hw.pci.enable_msi[x] is 1 or 0: mskc0: <Marvell Yukon 88E8038 Gigabit Ethernet> irq 10 at device 0.0 on pci2 mskc0: MSI count : 2 pcib2: mskc0 requested unsupported memory range 0-0xffffffff (decoding 0-0, 0-0) mskc0: 0x4000 bytes of rid 0x10 res 3 failed (0, 0xffffffff). mskc0: Lazy allocation of 0x4 bytes rid 0x14 type 4 at 0x1000 mskc0: unknown device: id=0xff, rev=0x0f device_attach: mskc0 attach returned 6 -- Cheers, Tai-hwa Liang [-- Attachment #2 --] Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-CURRENT #19: Fri Dec 1 11:51:08 CST 2006 avatar@home:/home/avatar/sys/i386/compile/test WARNING: WITNESS option enabled, expect reduced performance. Using 64 colors for the VM-PQ tuning (2048, 8) Preloaded elf kernel "/boot/kernel/kernel" at 0xc07d1000. Calibrating clock(s) ... i8254 clock: 1193177 Hz Timecounter "i8254" frequency 1193177 Hz quality 0 Calibrating TSC clock ... TSC clock: 1666788110 Hz CPU: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz (1666.79-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xe39d<SSE3,RSVD2,MON,DS_CPL,EST,TM2,<b9>,CX16,XTPR,<b15>> AMD Features=0x20100000<NX,LM> AMD Features2=0x1<LAHF> Cores per package: 2 Instruction TLB: 4 KB Pages, 4-way set associative, 128 entries 2nd-level cache: 2-MB, 8-way set associative, 64-byte line size 1st-level instruction cache: 32 KB, 8-way set associative, 64 byte line size 1st-level data cache: 32 KB, 8-way set associative, 64 byte line size L2 cache: 2048 kbytes, 8-way associative, 64 bytes/line real memory = 1072234496 (1022 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000825000 - 0x000000003ec53fff, 1044574208 bytes (255023 pages) avail memory = 1044332544 (995 MB) bios32: Found BIOS32 Service Directory header at 0xc00f6620 bios32: Entry = 0xfd460 (c00fd460) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xfd460+0x262 pnpbios: Found PnP BIOS data at 0xc00f66c0 pnpbios: Entry = f0000:acd3 Rev = 1.0 Other BIOS signatures found: random: <entropy source, Software, Yarrow> io: <I/O> mem: <memory> Pentium Pro MTRR support enabled null: <null device, zero device> acpi0: <ACRSYS ACRPRDCT> on motherboard acpi0: [MPSAFE] pci_open(1): mode 1 addr port (0x0cf8) is 0x8000f920 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=27a08086) pcibios: BIOS version 2.10 acpi_bus_number: root bus has no _BBN, assuming 0 acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR AcpiOsDerivePciId: bus 0 dev 0 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR AcpiOsDerivePciId: bus 0 dev 28 func 3 acpi_bus_number: root bus has no _BBN, assuming 0 acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR AcpiOsDerivePciId: bus 0 dev 31 func 0 acpi0: Power Button (fixed) acpi0: wakeup code va 0xd7668000 pa 0x9d000 atpic: Programming IRQ9 as level/low unknown: I/O range not supported acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0 acpi_hpet0: vend: 0x8086 rev: 0x1 num: 1 hz: 14318180 opts: leg_route count_size Timecounter "HPET" frequency 14318180 Hz quality 2000 ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 1 3 4 5 6 7 10 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 10 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 1 3 4 5 6 7 11 12 14 15 Validation 0 11 N 0 1 3 4 5 6 7 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 1 3 4 5 6 7 10 12 14 15 Validation 0 10 N 0 1 3 4 5 6 7 10 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 1 3 4 5 6 7 11 12 14 15 Validation 0 255 N 0 1 3 4 5 6 7 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 1 3 4 5 6 7 10 12 14 15 Validation 0 10 N 0 1 3 4 5 6 7 10 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 1 3 4 5 6 7 11 12 14 15 Validation 0 11 N 0 1 3 4 5 6 7 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 1 3 4 5 6 7 10 12 14 15 Validation 0 10 N 0 1 3 4 5 6 7 10 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 10 12 14 15 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 1 3 4 5 6 7 11 12 14 15 Validation 0 11 N 0 1 3 4 5 6 7 11 12 14 15 After Disable 0 255 N 0 1 3 4 5 6 7 11 12 14 15 cpu0: <ACPI CPU> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 acpi_throttle0: P_CNT from P_BLK 0x1010 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ACPI: Found matching pin for 0.1.INTA at func 0: 11 pci_link0: BIOS IRQ 11 for 0.1.INTA is invalid ACPI: Found matching pin for 0.27.INTA at func 0: 10 ACPI: Found matching pin for 0.28.INTA at func 0: 11 ACPI: Found matching pin for 0.28.INTB at func 1: 11 pci_link0: BIOS IRQ 11 for 0.28.INTB is invalid ACPI: Found matching pin for 0.28.INTC at func 2: 10 ACPI: Found matching pin for 0.28.INTD at func 3: 10 pci_link3: BIOS IRQ 10 for 0.28.INTD is invalid ACPI: Found matching pin for 0.29.INTA at func 0: 11 ACPI: Found matching pin for 0.29.INTB at func 1: 10 pci_link3: BIOS IRQ 10 for 0.29.INTB is invalid ACPI: Found matching pin for 0.29.INTC at func 2: 10 ACPI: Found matching pin for 0.29.INTD at func 3: 11 pci_link0: BIOS IRQ 11 for 0.29.INTD is invalid ACPI: Found matching pin for 0.31.INTA at func 1: 255 ACPI: Found matching pin for 0.31.INTB at func 3: 10 pci_link3: BIOS IRQ 10 for 0.31.INTB is invalid pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 found-> vendor=0x8086, dev=0x27a0, revid=0x03 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x27a1, revid=0x03 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x18 (6000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.1.INTA (src \\_SB_.PCI0.LPCB.LNKA:0) pci_link0: Picked IRQ 10 with weight 0 pcib0: slot 1 INTA routed to irq 10 via \\_SB_.PCI0.LPCB.LNKA found-> vendor=0x8086, dev=0x27d8, revid=0x02 bus=0, slot=27, func=0 class=04-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type 1, range 64, base 0xd2500000, size 14, enabled pcib0: matched entry for 0.27.INTA (src \\_SB_.PCI0.LPCB.LNKG:0) pcib0: slot 27 INTA routed to irq 10 via \\_SB_.PCI0.LPCB.LNKG found-> vendor=0x8086, dev=0x27d0, revid=0x02 bus=0, slot=28, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTA (src \\_SB_.PCI0.LPCB.LNKB:0) pcib0: slot 28 INTA routed to irq 11 via \\_SB_.PCI0.LPCB.LNKB found-> vendor=0x8086, dev=0x27d2, revid=0x02 bus=0, slot=28, func=1 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTB (src \\_SB_.PCI0.LPCB.LNKA:0) pcib0: slot 28 INTB routed to irq 10 via \\_SB_.PCI0.LPCB.LNKA found-> vendor=0x8086, dev=0x27d4, revid=0x02 bus=0, slot=28, func=2 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=c, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTC (src \\_SB_.PCI0.LPCB.LNKC:0) pcib0: slot 28 INTC routed to irq 10 via \\_SB_.PCI0.LPCB.LNKC found-> vendor=0x8086, dev=0x27d6, revid=0x02 bus=0, slot=28, func=3 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) intpin=d, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTD (src \\_SB_.PCI0.LPCB.LNKD:0) pci_link3: Picked IRQ 9 with weight 0 pcib0: slot 28 INTD routed to irq 9 via \\_SB_.PCI0.LPCB.LNKD found-> vendor=0x8086, dev=0x27c8, revid=0x02 bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[20]: type 4, range 32, base 0x1800, size 5, enabled pcib0: matched entry for 0.29.INTA (src \\_SB_.PCI0.LPCB.LNKH:0) pcib0: slot 29 INTA routed to irq 11 via \\_SB_.PCI0.LPCB.LNKH found-> vendor=0x8086, dev=0x27c9, revid=0x02 bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 map[20]: type 4, range 32, base 0x1820, size 5, enabled pcib0: matched entry for 0.29.INTB (src \\_SB_.PCI0.LPCB.LNKD:0) pcib0: slot 29 INTB routed to irq 9 via \\_SB_.PCI0.LPCB.LNKD found-> vendor=0x8086, dev=0x27ca, revid=0x02 bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=10 map[20]: type 4, range 32, base 0x1840, size 5, enabled pcib0: matched entry for 0.29.INTC (src \\_SB_.PCI0.LPCB.LNKC:0) pcib0: slot 29 INTC routed to irq 10 via \\_SB_.PCI0.LPCB.LNKC found-> vendor=0x8086, dev=0x27cb, revid=0x02 bus=0, slot=29, func=3 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 map[20]: type 4, range 32, base 0x1860, size 5, enabled pcib0: matched entry for 0.29.INTD (src \\_SB_.PCI0.LPCB.LNKA:0) pcib0: slot 29 INTD routed to irq 10 via \\_SB_.PCI0.LPCB.LNKA found-> vendor=0x8086, dev=0x27cc, revid=0x02 bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base 0xd2504000, size 10, enabled pcib0: matched entry for 0.29.INTA (src \\_SB_.PCI0.LPCB.LNKH:0) pcib0: slot 29 INTA routed to irq 11 via \\_SB_.PCI0.LPCB.LNKH found-> vendor=0x8086, dev=0x2448, revid=0xe2 bus=0, slot=30, func=0 class=06-04-01, hdrtype=0x01, mfdev=0 cmdreg=0x0004, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x27b9, revid=0x02 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x27df, revid=0x02 bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 map[20]: type 4, range 32, base 0x1880, size 4, enabled found-> vendor=0x8086, dev=0x27da, revid=0x02 bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 map[20]: type 4, range 32, base 0x18e0, size 5, enabled pcib0: matched entry for 0.31.INTB (src \\_SB_.PCI0.LPCB.LNKD:0) pcib0: slot 31 INTB routed to irq 9 via \\_SB_.PCI0.LPCB.LNKD pcib1: <ACPI PCI-PCI bridge> irq 10 at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xf000-0xfff pcib1: memory decode 0xd0000000-0xd1ffffff pcib1: prefetched decode 0xc0000000-0xcfffffff ACPI: Found matching pin for 1.0.INTA at func 0: 11 pci_link0: BIOS IRQ 11 for 1.0.INTA is invalid pci1: <ACPI PCI bus> on pcib1 pci1: physical bus=1 found-> vendor=0x10de, dev=0x01d7, revid=0xa1 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type 1, range 32, base 0xd1000000, size 24, enabled pcib1: requested memory range 0xd1000000-0xd1ffffff: good map[14]: type 3, range 64, base 0xc0000000, size 28, enabled pcib1: requested memory range 0xc0000000-0xcfffffff: good map[1c]: type 1, range 64, base 0xd0000000, size 24, enabled pcib1: requested memory range 0xd0000000-0xd0ffffff: good pcib1: matched entry for 1.0.INTA (src \\_SB_.PCI0.LPCB.LNKA:0) pcib1: slot 0 INTA routed to irq 10 via \\_SB_.PCI0.LPCB.LNKA vgapci0: <VGA-compatible display> mem 0xd1000000-0xd1ffffff,0xc0000000-0xcfffffff,0xd0000000-0xd0ffffff irq 10 at device 0.0 on pci1 pci0: <multimedia> at device 27.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> irq 11 at device 28.0 on pci0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0x0-0x0 pcib2: no prefetched decode ACPI: Found matching pin for 2.0.INTA at func 0: 11 pci_link0: BIOS IRQ 11 for 2.0.INTA is invalid pci2: <ACPI PCI bus> on pcib2 pci2: physical bus=2 found-> vendor=0x11ab, dev=0x4352, revid=0x14 bus=2, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x4010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 VPD Ident: Marvell Yukon 88E8038 Fast Ethernet Controller PN: Yukon 88E8038 EC: Rev. 1.4 MN: Marvell SN: AbCdEfG85BCA0 CP: id 1, BAR16, off 0x3cc RV: 0x7d MSI supports 2 messages, 64 bit map[10]: type 1, range 64, base 0, size 14, memory disabled map[18]: type 4, range 32, base 0, size 8, port disabled pcib2: matched entry for 2.0.INTA (src \\_SB_.PCI0.LPCB.LNKA:0) pcib2: slot 0 INTA routed to irq 10 via \\_SB_.PCI0.LPCB.LNKA pci2: <network, ethernet> at device 0.0 (no driver attached) pcib3: <ACPI PCI-PCI bridge> irq 10 at device 28.1 on pci0 pcib3: secondary bus 3 pcib3: subordinate bus 3 pcib3: I/O decode 0x0-0x0 pcib3: no prefetched decode ACPI: Found matching pin for 3.0.INTA at func 0: 11 pci3: <ACPI PCI bus> on pcib3 pci3: physical bus=3 found-> vendor=0x8086, dev=0x4222, revid=0x02 bus=3, slot=0, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type 1, range 32, base 0, size 12, memory disabled pcib3: matched entry for 3.0.INTA (src \\_SB_.PCI0.LPCB.LNKB:0) pcib3: slot 0 INTA routed to irq 11 via \\_SB_.PCI0.LPCB.LNKB pci3: <network> at device 0.0 (no driver attached) pcib4: <ACPI PCI-PCI bridge> irq 10 at device 28.2 on pci0 pcib4: secondary bus 4 pcib4: subordinate bus 4 pcib4: I/O decode 0x0-0x0 pcib4: no prefetched decode pci4: <ACPI PCI bus> on pcib4 pci4: physical bus=4 pcib5: <ACPI PCI-PCI bridge> irq 9 at device 28.3 on pci0 pcib5: secondary bus 5 pcib5: subordinate bus 7 pcib5: I/O decode 0x0-0x0 pcib5: no prefetched decode pcib5: could not get PCI interrupt routing table for \\_SB_.PCI0.RP04 - AE_NOT_FOUND pci5: <ACPI PCI bus> on pcib5 pci5: physical bus=5 pci0: <serial bus, USB> at device 29.0 (no driver attached) pci0: <serial bus, USB> at device 29.1 (no driver attached) pci0: <serial bus, USB> at device 29.2 (no driver attached) pci0: <serial bus, USB> at device 29.3 (no driver attached) pci0: <serial bus, USB> at device 29.7 (no driver attached) pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib6: secondary bus 10 pcib6: subordinate bus 11 pcib6: I/O decode 0x0-0x0 pcib6: no prefetched decode pcib6: Subtractively decoded bridge. pci10: <ACPI PCI bus> on pcib6 pci10: physical bus=10 found-> vendor=0x104c, dev=0x8039, revid=0x00 bus=10, slot=9, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0000, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x31 (1470 ns), mingnt=0x44 (17000 ns), maxlat=0x03 (750 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base 0xd2204000, size 12, memory disabled pcib6: requested memory range 0xd2204000-0xd2204fff: good pcib6: no PRT entry for 10.9.INTA found-> vendor=0x104c, dev=0x803b, revid=0x00 bus=10, slot=9, func=2 class=01-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x39 (1710 ns), mingnt=0x07 (1750 ns), maxlat=0x04 (1000 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base 0xd2205000, size 12, enabled pcib6: requested memory range 0xd2205000-0xd2205fff: good pcib6: no PRT entry for 10.9.INTA cbb0: <PCI-CardBus Bridge> mem 0xd2204000-0xd2204fff irq 10 at device 9.0 on pci10 cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xd2204000 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: [MPSAFE] cbb0: PCI Configuration space: 0x00: 0x8039104c 0x02100007 0x06070000 0x00823110 0x10: 0xd2204000 0x020000a0 0x200b0b0a 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x0744010a 0x40: 0x01101025 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x1844d060 0x02d80019 0x00190016 0x01321b22 0x90: 0x606602c0 0x00000000 0x00000000 0x00000000 0xa0: 0xfe120001 0x00c00000 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x504e151f 0x61001620 0x00000000 0x00000000 pci10: <mass storage> at device 9.2 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1880-0x188f at device 31.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1880 ata0: <ATA channel 0> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=50 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x10 err=0x01 lsb=0x14 msb=0xeb ata0: reset tp2 stat0=50 stat1=10 devices=0x9<ATAPI_SLAVE,ATA_MASTER> ata0: [MPSAFE] ata1: <ATA channel 1> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=7f ostat1=7f ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f ata1: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f ata1: reset tp2 stat0=ff stat1=ff devices=0x0 ata1: [MPSAFE] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_acad0: <AC Adapter> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 psm0: current command byte:0047 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse Explorer, device ID 4-00, 5 buttons psm0: config:00000000, flags:00000008, packet size:4 psm0: syncmask:08, syncbits:00 npx0: INT 16 interface ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xcf000-0xcffff,0xdf800-0xdffff pnpid ORM0000 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) ppc0: parallel port not found. ppc0: <Parallel port> failed to probe at irq 7 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0x201 0x201 0x201 0x201 sio0: probe failed test(s): 0 1 2 4 6 7 9 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0x201 0x201 0x201 0x201 sio0: probe failed test(s): 0 1 2 4 6 7 9 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio0: [FAST] sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0x201 0x201 0x201 0x201 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. Timecounter "TSC" frequency 1666788110 Hz quality 800 Timecounters tick every 1.000 msec lo0: bpf attached ata0-slave: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire acpi_acad0: acline initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times battery0: battery initialization start ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire ad0: setting PIO4 on ICH7 chip ad0: DMA limited to UDMA33, controller found non-ATA66 cable ad0: setting UDMA33 on ICH7 chip ad0: 114473MB <Hitachi HTS541612J9AT00 SBDOA70H> at ata0-master UDMA33 ad0: 234441648 sectors [232581C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad0 acd0: setting PIO4 on ICH7 chip acd0: setting UDMA33 on ICH7 chip acd0: <PHILIPS DVD-RAM SDVD8821/EX04> DVDR drive at ata0 as slave acd0: read 4148KB/s (4134KB/s) write 689KB/s (688KB/s), 2048KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: CD-RW 120mm data disc Trying to mount root from ufs:/dev/ad0s3a start_init: trying /sbin/init (probe0:ata0:0:1:0): error 22 (probe0:ata0:0:1:0): Unretryable Error (probe0:ata0:0:1:0): Down reving Protocol Version from 2 to 0? pass0 at ata0 bus 0 target 1 lun 0 pass0: <PHILIPS DVD-RAM SDVD8821 EX04> Removable CD-ROM SCSI-0 device pass0: 33.000MB/s transfers pci0: driver added found-> vendor=0x8086, dev=0x27d8, revid=0x02 bus=0, slot=27, func=0 class=04-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit pci0:27:0: reprobing on driver added found-> vendor=0x8086, dev=0x27c8, revid=0x02 bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 pci0:29:0: reprobing on driver added uhci0: <UHCI (generic) USB controller> port 0x1800-0x181f irq 11 at device 29.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1800 uhci0: [GIANT-LOCKED] usb0: <UHCI (generic) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered found-> vendor=0x8086, dev=0x27c9, revid=0x02 bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=9 pci0:29:1: reprobing on driver added uhci1: <UHCI (generic) USB controller> port 0x1820-0x183f irq 9 at device 29.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1820 uhci1: [GIANT-LOCKED] usb1: <UHCI (generic) USB controller> on uhci1 usb1: USB revision 1.0 uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered found-> vendor=0x8086, dev=0x27ca, revid=0x02 bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=10 pci0:29:2: reprobing on driver added uhci2: <UHCI (generic) USB controller> port 0x1840-0x185f irq 10 at device 29.2 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1840 uhci2: [GIANT-LOCKED] usb2: <UHCI (generic) USB controller> on uhci2 usb2: USB revision 1.0 uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2 uhub2: 2 ports with 2 removable, self powered found-> vendor=0x8086, dev=0x27cb, revid=0x02 bus=0, slot=29, func=3 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=10 pci0:29:3: reprobing on driver added uhci3: <UHCI (generic) USB controller> port 0x1860-0x187f irq 10 at device 29.3 on pci0 uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1860 uhci3: [GIANT-LOCKED] usb3: <UHCI (generic) USB controller> on uhci3 usb3: USB revision 1.0 uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3 uhub3: 2 ports with 2 removable, self powered found-> vendor=0x8086, dev=0x27cc, revid=0x02 bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 pci0:29:7: reprobing on driver added found-> vendor=0x8086, dev=0x27da, revid=0x02 bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=9 pci0:31:3: reprobing on driver added pci1: driver added pci2: driver added found-> vendor=0x11ab, dev=0x4352, revid=0x14 bus=2, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x4010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 VPD Ident: Marvell Yukon 88E8038 Fast Ethernet Controller PN: Yukon 88E8038 EC: Rev. 1.4 MN: Marvell SN: AbCdEfG85BCA0 CP: id 1, BAR16, off 0x3cc RV: 0x7d MSI supports 2 messages, 64 bit pci2:0:0: reprobing on driver added pci3: driver added found-> vendor=0x8086, dev=0x4222, revid=0x02 bus=3, slot=0, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit pci3:0:0: reprobing on driver added pci4: driver added pci5: driver added pci10: driver added found-> vendor=0x104c, dev=0x803b, revid=0x00 bus=10, slot=9, func=2 class=01-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x39 (1710 ns), mingnt=0x07 (1750 ns), maxlat=0x04 (1000 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 pci10:9:2: reprobing on driver added pci0: driver added found-> vendor=0x8086, dev=0x27d8, revid=0x02 bus=0, slot=27, func=0 class=04-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit pci0:27:0: reprobing on driver added found-> vendor=0x8086, dev=0x27cc, revid=0x02 bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 pci0:29:7: reprobing on driver added found-> vendor=0x8086, dev=0x27da, revid=0x02 bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=9 pci0:31:3: reprobing on driver added pci1: driver added pci2: driver added found-> vendor=0x11ab, dev=0x4352, revid=0x14 bus=2, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x4010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 VPD Ident: Marvell Yukon 88E8038 Fast Ethernet Controller PN: Yukon 88E8038 EC: Rev. 1.4 MN: Marvell SN: AbCdEfG85BCA0 CP: id 1, BAR16, off 0x3cc RV: 0x7d MSI supports 2 messages, 64 bit pci2:0:0: reprobing on driver added pci3: driver added found-> vendor=0x8086, dev=0x4222, revid=0x02 bus=3, slot=0, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit pci3:0:0: reprobing on driver added pci4: driver added pci5: driver added pci10: driver added found-> vendor=0x104c, dev=0x803b, revid=0x00 bus=10, slot=9, func=2 class=01-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x39 (1710 ns), mingnt=0x07 (1750 ns), maxlat=0x04 (1000 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 pci10:9:2: reprobing on driver added pci0: driver added found-> vendor=0x8086, dev=0x27d8, revid=0x02 bus=0, slot=27, func=0 class=04-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit pci0:27:0: reprobing on driver added found-> vendor=0x8086, dev=0x27cc, revid=0x02 bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 pci0:29:7: reprobing on driver added ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xd2504000-0xd25043ff irq 11 at device 29.7 on pci0 ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xd2504000 ehci0: [GIANT-LOCKED] usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0 usb4: USB revision 2.0 uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4 uhub4: 8 ports with 8 removable, self powered found-> vendor=0x8086, dev=0x27da, revid=0x02 bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=9 pci0:31:3: reprobing on driver added pci1: driver added pci2: driver added found-> vendor=0x11ab, dev=0x4352, revid=0x14 bus=2, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x4010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 VPD Ident: Marvell Yukon 88E8038 Fast Ethernet Controller PN: Yukon 88E8038 EC: Rev. 1.4 MN: Marvell SN: AbCdEfG85BCA0 CP: id 1, BAR16, off 0x3cc RV: 0x7d MSI supports 2 messages, 64 bit pci2:0:0: reprobing on driver added pci3: driver added found-> vendor=0x8086, dev=0x4222, revid=0x02 bus=3, slot=0, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit pci3:0:0: reprobing on driver added pci4: driver added pci5: driver added pci10: driver added found-> vendor=0x104c, dev=0x803b, revid=0x00 bus=10, slot=9, func=2 class=01-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x39 (1710 ns), mingnt=0x07 (1750 ns), maxlat=0x04 (1000 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 pci10:9:2: reprobing on driver added battery0: battery initialization done, tried 2 times pci0: driver added found-> vendor=0x8086, dev=0x27d8, revid=0x02 bus=0, slot=27, func=0 class=04-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit pci0:27:0: reprobing on driver added found-> vendor=0x8086, dev=0x27da, revid=0x02 bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=9 pci0:31:3: reprobing on driver added pci1: driver added pci2: driver added found-> vendor=0x11ab, dev=0x4352, revid=0x14 bus=2, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x4010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 VPD Ident: Marvell Yukon 88E8038 Fast Ethernet Controller PN: Yukon 88E8038 EC: Rev. 1.4 MN: Marvell SN: AbCdEfG85BCA0 CP: id 1, BAR16, off 0x3cc RV: 0x7d MSI supports 2 messages, 64 bit pci2:0:0: reprobing on driver added mskc0: <Marvell Yukon 88E8038 Gigabit Ethernet> irq 10 at device 0.0 on pci2 mskc0: MSI count : 2 pcib2: mskc0 requested unsupported memory range 0-0xffffffff (decoding 0-0, 0-0) mskc0: 0x4000 bytes of rid 0x10 res 3 failed (0, 0xffffffff). mskc0: Lazy allocation of 0x4 bytes rid 0x14 type 4 at 0x1000 mskc0: unknown device: id=0xff, rev=0x0f device_attach: mskc0 attach returned 6 pci3: driver added found-> vendor=0x8086, dev=0x4222, revid=0x02 bus=3, slot=0, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit pci3:0:0: reprobing on driver added pci4: driver added pci5: driver added pci10: driver added found-> vendor=0x104c, dev=0x803b, revid=0x00 bus=10, slot=9, func=2 class=01-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0006, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x39 (1710 ns), mingnt=0x07 (1750 ns), maxlat=0x04 (1000 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 pci10:9:2: reprobing on driver added
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?0612011540189.97361>