Date: Mon, 2 Feb 2004 00:06:15 +0100 From: "Willem Jan Withagen" <wjw@withagen.nl> To: <current@freebsd.org> Subject: Just one local mount frozen.... Message-ID: <067e01c3e917$fe6a8820$4c1b3dd4@digiware.nl>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
Hi,
I'm running a series of test to get some insight on NFS performance, and now
the partition on server is really frozen. Both for NFS access, and for local
access. The disk is a regular (but old) SCSI attached to an onboard adaptec.
df(1) still works locally, ls(1) just hangs....
The system is still up and running:
FreeBSD pc77.digiware.nl 5.2-CURRENT FreeBSD 5.2-CURRENT #7: Tue Jan 20
12:34:52 CET 2004
root@freebee.digiware.nl:/mnt2/obj/usr/src5/src/sys/ML370 i386
I'm shure that if I reboot, it'll work for a while again, but is anybody
interesten in debugging this. Then tell me what I need to look for and test.
dmesg(1) attached.
--WjW
[-- Attachment #2 --]
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #7: Tue Jan 20 12:34:52 CET 2004
root@freebee.digiware.nl:/mnt2/obj/usr/src5/src/sys/ML370
Preloaded elf kernel "/boot/kernel/kernel" at 0xc078d000.
Calibrating clock(s) ... i8254 clock: 1193210 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 664565617 Hz
CPU: Intel Pentium III (664.57-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 268419072 (255 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000826000 - 0x000000000fb4bfff, 254959616 bytes (62246 pages)
avail memory = 257171456 (245 MB)
bios32: Found BIOS32 Service Directory header at 0xc00ffee0
bios32: Entry = 0xf0000 (c00f0000) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x84
Other BIOS signatures found:
null: <null device, zero device>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
random: <entropy source>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=00091166)
pcibios: BIOS version 2.10
pcib0: <ServerWorks NB6635 3.0LE host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x1166, dev=0x0009, revid=0x05
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0107, statreg=0x2200, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0009, revid=0x05
bus=0, slot=0, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0107, statreg=0x0200, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 4, range 32, base 00002000, size 8, enabled
map[14]: type 1, range 32, base c6fffc00, size 10, enabled
map[18]: type 1, range 32, base c6ffe000, size 12, enabled
pci_cfgintr: can't route an interrupt to 0:1 INTA
found-> vendor=0x1000, dev=0x000a, revid=0x02
bus=0, slot=1, func=0
class=01-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0117, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0xff (7650 ns), mingnt=0x1e (7500 ns), maxlat=0x08 (2000 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 00002400, size 8, enabled
map[14]: type 1, range 32, base c6ffdc00, size 10, enabled
map[18]: type 1, range 32, base c6ffc000, size 12, enabled
pci_cfgintr: can't route an interrupt to 0:1 INTB
found-> vendor=0x1000, dev=0x000a, revid=0x02
bus=0, slot=1, func=1
class=01-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0117, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0xff (7650 ns), mingnt=0x1e (7500 ns), maxlat=0x08 (2000 ns)
intpin=b, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base c6ffb000, size 12, enabled
map[14]: type 4, range 32, base 00002800, size 6, enabled
map[18]: type 1, range 32, base c6e00000, size 20, enabled
pci_cfgintr: can't route an interrupt to 0:2 INTA
found-> vendor=0x8086, dev=0x1229, revid=0x08
bus=0, slot=2, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 3, range 32, base c5000000, size 24, enabled
map[14]: type 4, range 32, base 00002c00, size 8, enabled
map[18]: type 1, range 32, base c6dff000, size 12, enabled
found-> vendor=0x1002, dev=0x4756, revid=0x7a
bus=0, slot=3, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0087, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
powerspec 1 supports D0 D3 current D0
map[10]: type 4, range 32, base 00001800, size 8, enabled
map[14]: type 1, range 32, base c6dfef00, size 8, enabled
found-> vendor=0x0e11, dev=0xa0f0, revid=0x00
bus=0, slot=4, func=0
class=08-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0103, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[90]: type 4, range 32, base 00000000, size 4, enabled
found-> vendor=0x1166, dev=0x0200, revid=0x4f
bus=0, slot=15, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 00003000, size 4, enabled
found-> vendor=0x1166, dev=0x0211, revid=0x00
bus=0, slot=15, func=1
class=01-01-8a, hdrtype=0x00, mfdev=1
cmdreg=0x0105, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
sym0: <1510d> port 0x2000-0x20ff mem 0xc6ffe000-0xc6ffefff,0xc6fffc00-0xc6ffffff irq 5 at device 1.0 on pci0
sym0: chip clock is 40401KHz
sym0: No NVRAM, ID 7, Fast-40, LVD, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
sym1: <1510d> port 0x2400-0x24ff mem 0xc6ffc000-0xc6ffcfff,0xc6ffdc00-0xc6ffdfff irq 10 at device 1.1 on pci0
sym1: No NVRAM, ID 7, Fast-40, LVD, parity checking
sym1: open drain IRQ line driver, using on-chip SRAM
sym1: using LOAD/STORE-based firmware.
fxp0: <Intel 82559 Pro/100 Ethernet> port 0x2800-0x283f mem 0xc6e00000-0xc6efffff,0xc6ffb000-0xc6ffbfff irq 11 at device 2.0 on pci0
fxp0: using memory space register mapping
fxp0: Disabling dynamic standby mode in EEPROM
fxp0: New EEPROM ID: 0x40a0
fxp0: EEPROM checksum @ 0xff: 0x7ec7 -> 0x7ec7
fxp0: Ethernet address 00:02:a5:07:2f:dc
fxp0: PCI IDs: 8086 1229 0e11 b134 0008
fxp0: Dynamic Standby mode is enabled
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
pci0: <display, VGA> at device 3.0 (no driver attached)
pci0: <base peripheral> at device 4.0 (no driver attached)
isab0: <PCI-ISA bridge> port 0-0xf at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks ROSB4 UDMA33 controller> port 0x3000-0x300f at device 15.1 on pci0
ata0: reset tp1 mask=03 ostat0=20 ostat1=30
ata0-master: stat=0x20 err=0x20 lsb=0x20 msb=0x20
ata0-slave: stat=0x30 err=0x30 lsb=0x30 msb=0x30
ata0: reset tp2 mask=03 stat0=20 stat1=30 devices=0x0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: reset tp1 mask=03 ostat0=00 ostat1=00
ata1-master: stat=0x00 err=0xff lsb=0x00 msb=0x00
ata1-slave: stat=0x00 err=0xff lsb=0x00 msb=0x00
ata1: reset tp2 mask=03 stat0=00 stat1=00 devices=0x0
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pcib3: <ServerWorks NB6635 3.0LE host to PCI bridge> at pcibus 3 on motherboard
pci3: <PCI bus> on pcib3
pci3: physical bus=3
map[10]: type 4, range 32, base 00004000, size 5, enabled
pci_cfgintr: can't route an interrupt to 3:5 INTA
found-> vendor=0x1044, dev=0xa400, revid=0x02
bus=3, slot=5, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0200, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x08 (2000 ns)
intpin=a, irq=15
dpt0: <DPT Caching SCSI RAID Controller> port 0x4000-0x401f irq 15 at device 5.0 on pci3
dpt0: DPT PM3334UW FW Rev. 07L0, 1 channel, 64 CCBs
eisa0: <EISA bus> on motherboard
mainboard0: <CPQ0690 (System Board)> on eisa0 slot 0
ata: ata0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xee000-0xeffff,0xe8000-0xedfff,0xc8000-0xc8fff,0xc0000-0xc7fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
pmtimer0 on isa0
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 06 90 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0 failed to probe on isa0
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 664565617 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
Waiting 5 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
(noperiph:sym1:0:-1:-1): SCSI BUS reset delivered.
ata1: spurious interrupt - status=0x00 error=0xff
ata1: spurious interrupt - status=0x00 error=0xff
ata1: spurious interrupt - status=0x00 error=0xff
ata1: spurious interrupt - status=0x00 error=0xff
ata1: spurious interrupt - status=0x00 error=0xff
ata1: spurious interrupt - status=0x00 error=0xff
ata1: spurious interrupt - status=0x00 error=0xff
ata1: spurious interrupt - status=0x00 error=0xff
ata1: spurious interrupt - status=0x00 error=0xff
ata1: spurious interrupt - status=0x00 error=0xff
ata1: spurious interrupt - status=0x00 error=0xff
ata1: spurious interrupt - status=0x00 error=0xff
ata1: spurious interrupt - status=0x00 error=0xff
ata1: spurious interrupt - status=0x00 error=0xff
ata1: spurious interrupt - status=0x00 error=0xff
ata1: spurious interrupt - status=0x00 error=0xff
(probe16:sym1:0:1:0): Retrying Command
GEOM: create disk da0 dp=0xc2841050
pass0 at sym1 bus 0 target 1 lun 0
pass0: <QUANTUM ATLAS IV 9 WLS 0909> Fixed Direct Access SCSI-3 device
pass0: Serial Number 369928537643
pass0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da0 at sym1 bus 0 target 1 lun 0
da0: <QUANTUM ATLAS IV 9 WLS 0909> Fixed Direct Access SCSI-3 device
da0: Serial Number 369928537643
da0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit), Tagged Queueing Enabled
da0: 8761MB (17942584 512 byte sectors: 255H 63S/T 1116C)
GEOM: new disk da0
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:17928477
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure da0s1, start 32256 length 9179380224 end 9179412479
GEOM: Configure da0c, start 0 length 9186603008 end 9186603007
GEOM: Configure da0e, start 0 length 9186603008 end 9186603007
GEOM: Configure da0s1a, start 0 length 268435456 end 268435455
GEOM: Configure da0s1b, start 268435456 length 536870912 end 805306367
GEOM: Configure da0s1c, start 0 length 9179380224 end 9179380223
GEOM: Configure da0s1e, start 805306368 length 1073741824 end 1879048191
GEOM: Configure da0s1f, start 1879048192 length 536870912 end 2415919103
GEOM: Configure da0s1g, start 2415919104 length 536870912 end 2952790015
GEOM: Configure da0s1h, start 2952790016 length 6226590208 end 9179380223
Mounting root from ufs:/dev/da0s1a
start_init: trying /sbin/init
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?067e01c3e917$fe6a8820$4c1b3dd4>