Date: Tue, 18 Jun 2002 16:13:04 +0100 From: "Jamie Heckford" <jamie@tridentmicrosystems.co.uk> To: <freebsd-stable@freebsd.org> Subject: Wierd ATA errors Message-ID: <083501c216da$a51566c0$4464a8c0@JAMIEHECKFORD>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. ------=_NextPart_000_0832_01C216E3.06D058E0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Hi, Im getting a lot of strange errors on FreeBSD 4.6-STABLE #2: Tue Jun 18 14:20:36 BST 2002, involving 3x 120GB drives I have installed. The errors im getting are ones such as these: ad5: WRITE command timeout tag=0 serv=0 - resetting ata2: resetting devices .. ad4: DMA limited to UDMA33, non-ATA66 cable or device done ad6: WRITE command timeout tag=0 serv=0 - resetting ata3: resetting devices .. done ad6: WRITE command timeout tag=0 serv=0 - resetting ata3: resetting devices .. done I haven't enabled tagged q'ing or write caching - full dmesg output with errors attached. Thanks in advance for any help, -- Jamie Heckford Network Manager Trident Microsystems Ltd Tel: 01737 780790 Fax: 01737 771908 http://www.tridentmicrosystems.co.uk *********** This e-mail message contains confidential information for the above addressee only. Any opinion or views contained in this e-mail message are those of the sender and do not necessarily represent those of the Company. Unless otherwise stated this e-mail message is not intended to be contractually binding. E-mail transmission cannot be guaranteed to be secure or error-free and the sender therefore does not accept liability for any errors or omissions in the contents of this message. Trident Microsystems Ltd Group of Companies Perrywood Business Park, Honeycrock Lane, Salfords, Redhill, Surrey, RH1 5JQ Tel: (44) (0) 1737 780790 Fax: (44) (0) 1737 771908 Registered office: Abacus House, Bone Lane, Newbury, Berkshire, RG14 5SF ------=_NextPart_000_0832_01C216E3.06D058E0 Content-Type: text/plain; name="len-dmesg.txt" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="len-dmesg.txt" Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights = reserved. FreeBSD 4.6-STABLE #2: Tue Jun 18 14:20:36 BST 2002 admin@lennon.trident-uk.co.uk:/usr/src/sys/compile/LENNON Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 1263450917 Hz CPU: Pentium III/Pentium III Xeon/Celeron (1263.45-MHz 686-class CPU) Origin =3D "GenuineIntel" Id =3D 0x6b1 Stepping =3D 1 = Features=3D0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE= ,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory =3D 671072256 (655344K bytes) avail memory =3D 649281536 (634064K bytes) Preloaded elf kernel "kernel" at 0xc02e3000. Pentium Pro MTRR support enabled md0: Malloc disk npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 atapci0: <CMD 649 ATA100 controller> port = 0x2030-0x203f,0x2028-0x202b,0x2020-0x2027,0x2018-0x201b,0x2010-0x2017 = irq 5 at devic e 3.0 on pci0 ata2: at 0x2010 on atapci0 ata3: at 0x2020 on atapci0 fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x2040-0x207f mem = 0xc6e00000-0xc6efffff,0xc6fff000-0xc6ffffff irq 10 at device 4. 0 on pci0 fxp0: Ethernet address 00:02:a5:ed:e6:f4 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci0: <ATI Mach64-GR graphics accelerator> at 5.0 irq 11 pci0: <unknown card> (vendor=3D0x0e11, dev=3D0xa0f0) at 6.0 irq 15 isab0: <PCI to ISA bridge (vendor=3D1166 device=3D0201)> at device 15.0 = on pci0 isa0: <ISA bus> on isab0 atapci1: <ServerWorks CSB5 ATA100 controller> port = 0xa00-0xa03,0x2000-0x200f,0-0x3,0-0x7,0x3f4-0x3f7,0x1f0-0x1f7 at device = 15. 1 on pci0 ata0: at 0x1f0 irq 14 on atapci1 ata1: at 0x170 irq 15 on atapci1 pci0: <OHCI USB controller> at 15.2 irq 15 pcib2: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard pci2: <PCI bus> on pcib2 pcib1: <Host to PCI bridge> on motherboard pci1: <PCI bus> on pcib1 eisa0: <EISA bus> on motherboard mainboard0: <CPQ0721 (System Board)> on eisa0 slot 0 orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xee000-0xeffff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on = isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on = isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> IP packet filtering initialized, divert disabled, rule-based forwarding = disabled, default to accept, logging limited to 100 pa ckets/entry by default ata0-slave: ATA identify retries exceeded ad4: 38166MB <MAXTOR 6L040J2> [77545/16/63] at ata2-master UDMA100 ad5: 114473MB <WDC WD1200JB-00CRA1> [232581/16/63] at ata2-slave UDMA100 ad6: 114473MB <WDC WD1200JB-00CRA1> [232581/16/63] at ata3-master = UDMA100 ad7: 114473MB <WDC WD1200JB-00CRA1> [232581/16/63] at ata3-slave UDMA100 acd0: CDROM <Compaq CRD-8402B> at ata0-master PIO4 Mounting root from ufs:/dev/ad4s1a stray irq 7 stray irq 7 stray irq 7 stray irq 7 stray irq 7 too many stray irq 7's; not logging any more vinum: loaded vinum: CONFIGURATION OBLITERATED vinum: drive vinumdrive0 is up vinum: drive vinumdrive1 is up vinum: drive vinumdrive2 is up vinum: removing 363 blocks of partial stripe at the end of vinum0.p0 vinum: vinum0.p0.s0 is up vinum: vinum0.p0.s1 is up vinum: vinum0.p0.s2 is up vinum: vinum0.p0 is up vinum: vinum0 is up ad5: WRITE command timeout tag=3D0 serv=3D0 - resetting ata2: resetting devices .. ad4: DMA limited to UDMA33, non-ATA66 cable = or device done ad6: WRITE command timeout tag=3D0 serv=3D0 - resetting ata3: resetting devices .. done ad6: WRITE command timeout tag=3D0 serv=3D0 - resetting ata3: resetting devices .. done ad6: WRITE command timeout tag=3D0 serv=3D0 - resetting ata3: resetting devices .. done ad7: WRITE command timeout tag=3D0 serv=3D0 - resetting ata3: resetting devices .. done ad6: WRITE command timeout tag=3D0 serv=3D0 - resetting ata3: resetting devices .. done ad6: WRITE command timeout tag=3D0 serv=3D0 - resetting ata3: resetting devices .. done ad6: READ command timeout tag=3D0 serv=3D0 - resetting ata3: resetting devices .. done ad5: WRITE command timeout tag=3D0 serv=3D0 - resetting ata2: resetting devices .. ad4: DMA limited to UDMA33, non-ATA66 cable = or device done ad5: WRITE command timeout tag=3D0 serv=3D0 - resetting ata2: resetting devices .. ad4: DMA limited to UDMA33, non-ATA66 cable = or device done ad5: WRITE command timeout tag=3D0 serv=3D0 - resetting ata2: resetting devices .. ad4: DMA limited to UDMA33, non-ATA66 cable = or device done ad5: WRITE command timeout tag=3D0 serv=3D0 - resetting ata2: resetting devices .. ad4: DMA limited to UDMA33, non-ATA66 cable = or device done ad5: WRITE command timeout tag=3D0 serv=3D0 - resetting ata2: resetting devices .. ad4: DMA limited to UDMA33, non-ATA66 cable = or device done ad6: WRITE command timeout tag=3D0 serv=3D0 - resetting ata3: resetting devices .. done ad6: WRITE command timeout tag=3D0 serv=3D0 - resetting ata3: resetting devices .. done ad6: WRITE command timeout tag=3D0 serv=3D0 - resetting ata3: resetting devices .. done ad7: WRITE command timeout tag=3D0 serv=3D0 - resetting ata3: resetting devices .. done ad7: WRITE command timeout tag=3D0 serv=3D0 - resetting ata3: resetting devices .. done ad6: WRITE command timeout tag=3D0 serv=3D0 - resetting ata3: resetting devices .. done ad7: WRITE command timeout tag=3D0 serv=3D0 - resetting ata3: resetting devices .. done ad6: WRITE command timeout tag=3D0 serv=3D0 - resetting ata3: resetting devices .. done ad6: WRITE command timeout tag=3D0 serv=3D0 - resetting ata3: resetting devices .. done ------=_NextPart_000_0832_01C216E3.06D058E0-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?083501c216da$a51566c0$4464a8c0>