Date: Thu, 10 Aug 2006 12:13:25 -0700 From: "David Christensen" <davidch@broadcom.com> To: "Scott Wilson" <scott.wilson@gmail.com>, pyunyh@gmail.com Cc: stable@freebsd.org, davidch@freebsd.org, Eric Hodel <drbrain@segment7.net> Subject: RE: Re: Re: bce0: Error mapping mbuf into TX chain! Message-ID: <09BFF2FA5EAB4A45B6655E151BBDD90301B7B43F@NT-IRVA-0750.brcm.ad.broadcom.com>
next in thread | raw e-mail | index | archive | help
Scott, >=20 > What are you doing when this problem occurs? Is it something=20 > I can easily duplicate here? When I tested the fix on=20 > -CURRENT I used the following command suggested by Doug to=20 > bring out the failure quickly: >=20 > ssh <bad machine> "dd if=3D/dev/zero bs=3D1" > /dev/null >=20 > Does this same command fail for you too? >=20 I updated my RELENG_6 system to the tip and tried the same ssh=20 command which you mentioned also failed on your system. I couldn't duplicate the problem at all. Are you sure you are actually using=20 the new code? My system is reporting a different driver version than yours (mine =3D 0.9.6, yours =3D 0.9.5): bce0: <Broadcom NetXtreme II BCM5708 1000Base-T (B2), v0.9.6> mem 0xdc000000-0xddffffff irq 16 at device 0.0 on pci2 bce0: ASIC ID 0x57081020; Revision (B2); PCI-X 64-bit 133MHz bce0: Ethernet address: 00:10:18:15:f6:96 Are you still having a problem? Can you change the version number in if_bce.c (bce_driver_version) and make sure the right driver is loading? Dave
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?09BFF2FA5EAB4A45B6655E151BBDD90301B7B43F>