Date: Thu, 26 Jun 2003 19:14:15 -0400 From: "Will Saxon" <WillS@housing.ufl.edu> To: "David Xu" <davidxu@viatech.com.cn>, "Soeren Schmidt" <sos@spider.deepcore.dk>, "Bill Paul" <wpaul@freebsd.org> Cc: current@freebsd.org Subject: RE: Heads up: checking in change to ata-card.c Message-ID: <0E972CEE334BFE4291CD07E056C76ED8CBBCAB@bragi.housing.ufl.edu>
next in thread | raw e-mail | index | archive | help
> -----Original Message----- > From: David Xu [mailto:davidxu@freebsd.org] > Sent: Thursday, June 26, 2003 6:30 PM > To: Soeren Schmidt; Bill Paul > Cc: imp@freebsd.org; current@freebsd.org > Subject: Re: Heads up: checking in change to ata-card.c >=20 >=20 > I have another problem different with Bill Paul's. > I have a Tyan Tiger 230T dual CPU MB. On second IDE, > there are MITSUBISHI 52X CDROM as master and a SONY > CD-RW CRX140E 8X/4X/32X as slave. FreeBSD never got > them to work, while MS Windows and Linux and NetBSD and > OpenBSD all work well with these devices. FreeBSD always > stuck at "MODE SENSE BIG", this sucks, I must disable > second IDE in BIOS before booting into FreeBSD and > reenable it before booting into another OS. I changed > configuration several times, both DMA and PIO mode don't > work, it works only when CR-RW is pulled. >=20 > David Xu I started seeing this behavior also, but it started when I swapped = drives from a dead Via dual chipset board machine (MSI 694D Pro, I = think) into an athlon machine with an Asus A7Vsomething. I can get = correct model numbers, etc. if helpful. This is a 4.8-RELEASE = installation. I had to reboot the first time with an old 4.4 GENERIC = leftover from installation, and I saw no errors, but after compiling a = uniprocessor kernel I started seeing the above behavior. Although, I = left it for awhile and eventually the machine does boot after about 30 = of the MODE_SENSE_BIG, resetting devices lines. -Will
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?0E972CEE334BFE4291CD07E056C76ED8CBBCAB>