Date: Wed, 27 Dec 2006 18:31:04 +0300 From: "Andrew N. Below" <defan@zenon.net> To: "Vivek Khera" <vivek@khera.org> Cc: freebsd-stable@freebsd.org Subject: Re: aaccli on recent conrollers? Message-ID: <0bcb01c729cc$05788480$970da8c0@jam.zenon.net> References: <86F45867-B619-416A-AC4C-B9283A4CA25F@khera.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi Vivek and oths... ----- Original Message ----- From: "Vivek Khera" <vivek@khera.org> To: "FreeBSD Stable" <freebsd-stable@freebsd.org> Sent: 10 ноября 2006 г. 19:42 Subject: aaccli on recent conrollers? > I have just built a new SunFire X4100 server with an Adaptec 2230SLP > RAID card using FreeBSD 6.2-PRE kernel (from September 20). > Everything is working extremely well except I cannot run the aaccli > utility on this controller. When I try to open the controller, it > gives this error: > > Command Error: <The current AFAAPI.DLL is too old to work with the > current controller software.> The same error I get with Adaptec SATA RAID 2420S (aac0 controller device, aacdX volume devices) with latest controller firmware. I have just tried to install aacu.ko module from original Adaptec's drivers, but still got no success: aacu0: <Adaptec SATA RAID 2420SA> mem 0xb8a00000-0xb8bfffff,0xb8c00000-0xb8c00fff irq 24 at device 3.0 on pci6 aacu0: New comm. interface enabled aacu0: Adaptec Raid Controller 2.0.7-1 aacdu0: <RAID 1 (Mirror)> on aacu0 aacdu0: 238289MB (488015872 sectors) aacdu1: <Volume> on aacu0 aacdu1: 238289MB (488015872 sectors) CLI > open aac0 Executing: open "aac0" Command Error: The current AFAAPI.DLL is too old to work with the current controller software. Latest Adaptec drivers released at 25 Oct 2006, aaccli says "Copyright 1998-2002"... Maybe someone already tried to contact Adaptec? -- Andrew N. Below Zenon N.S.P.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?0bcb01c729cc$05788480$970da8c0>